Boom Audio HD-N02 Full Face Helmet User Guide

HD-N02 Full Face Helmet

Product Information

The Boom! Audio HD-N02 is a wireless headset designed for use
with motorcycles. It features a range of functions including
Bluetooth pairing, volume adjustment, intercom communication, and
firmware upgrades. The headset has a power button, volume buttons,
and a center button for navigation. It also has LED indicators to
display charging status and device pairing.

Product Usage Instructions

1. Power On/Off: Press and hold the power button for 1
   second to turn on or off the headset.

2. Volume Adjustment: Tap the volume buttons to adjust the
   volume level.

3. Bluetooth Pairing: To pair with a Bluetooth-enabled
   device such as a phone, MP3 player, or GPS, follow these steps:

4. On the Boom! Box radio, go to Home > Setup > Wireless
   Headset Setup > Pair Rider and select the Boom! Audio N02.

5. Press the center button 10 times to enter the configuration
   menu.

6. Select “Bluetooth Pairing” and tap the center button.

7. Select “Boom! Audio N02” and tap the center button.

8. Enter the PIN “0000” and tap the center button to complete the
   pairing process.

9. Intercom Communication: The headset supports both Open
   Mesh and Group Mesh intercom modes. To start or end an intercom
   conversation with friends or group members, follow these steps:

10. For Open Mesh Intercom:

  * Tap the mesh intercom button once to turn on or off the mesh  

intercom.

  * To communicate with friends, tap the button according to the  

number of the friend (e.g., tap once for the 1st friend, double-tap
for the 2nd friend, triple-tap for the 3rd friend).

2. For Group Mesh Intercom:
  * To create a group mesh, enter the mesh grouping menu with two  

or more open mesh users and follow the on-screen instructions.

  * To join an existing group mesh, one of the current members and  

a new member should enter the mesh grouping menu and follow the
instructions.

5. Channel Setting: If there is interference in the open
   mesh communication, you can change the channel. Follow these steps:

6. Double tap the center button to enter the channel setting.

7. Navigate between channels using the volume buttons.

8. Save the selected channel by tapping the center button.

9. To exit the channel setting, tap either the plus (+) or minus
   (-) button until you hear a voice prompt saying “Exit,” then tap
   the center button.

Note: It is recommended to upgrade the firmware of the
Boom! Audio HD-N02 to the latest version if there is no
communication in mesh or group mesh modes.

Boom! Audio HD-N02 Quick Start Guide
Right Side

DC Power Charging & Firmware Upgrade Port

Mesh Intercom Button Charging LED

Left Side
Center Button (-) Button

(+) Button Status LED

1 Button Operation
Tap Tapping 1″ Press for 1 sec
Power On/Off

1″

Press

2.2.0

Tap Double Tapping 5″ 12″ Press and Hold
Volume Adjustment

or

Tap

Bluetooth Pairing WHIM

Boom! Box radio go to: Home > Setup > Wireless Headset Setup > Pair Rider (select)

Rider
10″ Press
Configuration Menu

2

Rider Tap
Phone Pairing

Select: Boom! Audio N02…

Bluetooth Pairing Phone, MP3 and GPS

LED

10″ Press

Select Boom! Audio N02 l

Bluetooth

l ll

Device A Boom! Audio N02 Device B ……

Tap
Enter 0 0 0 0 PIN

3 Mobile Phone
Answer End
Voice Dial Speed Dial
Reject

Tap
2″ Press
3″ Press
3″ Press
2″ Press

4 Music
Battery Check
Power On

1″ Press
1″ Press
1″ Press
LED

Configuration Menu
10″ Press There is Universal Intercom Pairing in the Configuration Menu.

5

Pairing Intercom
Headset A 5″
Press LED

Pairing

Headset B
5″ Press LED

Tap

Start/End Intercom

Tap 1st Friend

Tap Double Tap 2nd Friend

Tap Triple Tap 3rd Friend
6

Start/End Group Intercom

Start Group Intercom

End Group Intercom

Tap

1″ Press

Mesh Intercom On/Off
Tap
Note: Open Mesh and Group Mesh cannot communicate with the previous modes Public Mode and Private Mode. In case of no communication, the Boom! Audio HD-N02 should be upgraded to the latest firmware.

Mesh Intercom Open MeshTM
When Mesh Intercom is enabled, the Boom! Audio HD-N02 will be in Open Mesh (default: channel 1) initially. Users can freely communicate with each other in the same Open Mesh channel.
7
Channel Setting (Default: channel 1)
If the Open Mesh communication experiences interference because other groups are also using channel 1 (default), change the channel. You can select from channels 1 to 9. 1. Enter into the Channel Setting.
Tap Double Tap

2. Navigate between channels. (1 2

or

Tap

8 9 Exit 1

)

3. Save the channel. Tap

Note: To exit the Channel Setting, tap the (+) Button or (-) Button until you hear a voice prompt, “Exit”, and tap the Center Button.

8

Mesh Intercom Group MeshTM
Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each Boom! Audio HDN02. Up to 24 users can all be connected in each private group.

Creating a Group Mesh

Creating a Group Mesh requires two or more Open Mesh users.

Open Mesh

B

D

A

C

1. Enter into Mesh Grouping to create a Group Mesh.

C
YOU
and
D
FRIEND

5″
l
Press
5″ Press

2. The Bluetooth systems complete Mesh Grouping and automatically switch from Open Mesh to Group Mesh. Open Mesh Group Mesh

B

D

A

C

9

Joining an Existing Group Mesh

One of the members in an Existing Group Mesh can allow new members in Open Mesh to join the Existing Group Mesh.

New Members

Existing Group Mesh and Current Members

B

D

F

A

C

E

1. One of the current members and a new member enter into Mesh Grouping to join the Existing Group Mesh.

C
YOU (NEW MEMBER)
and
E
CURRENT MEMBER IN GROUP
MESH
10

5″
l
Press
5″ Press

2. The Bluetooth systems complete Mesh Grouping. The new members will hear a voice prompt as their Bluetooth systems automatically switch from Open Mesh to Group Mesh.

D

F

C

E

Mesh Intercom Reset Mesh
If a Bluetooth system in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).
8″ Press
Mesh Intercom Mic Enable/Disable

1″ Press
Radio On/Off

Radio Seek Stations

1″

Press

or

Radio Scan Up FM Band
Start or
Stop Save to preset while scanning
Tap
11 Save

1″ Press

Tap Double Tap

Radio Save or Delete Preset

3″ Press

1 ~ 10, Cancel

Tap

Save or
Delete

1″ Press
1″ Press

12

Radio Move to Preset Station

1″ Press

I1I I2I …I5I… I9I I10I

Setting
Using the Boom Audio Bluetooth Device Manager
The Device Manager allows you to upgrade the firmware and configure the device settings directly from your PC. Using this software, you can assign speed dial presets, FM radio frequency presets and more. It is available to download for both Windows and Mac. For more information on downloading the Device Manager, please visit www.H-D.com/infotainment-support.
Using the Sena Motorcycles App
The Sena Motorcycles App allows you to configure the device settings, create groups of intercom friends, and view the quick start guide. Simply pair your phone with your Boom! Audio HD-N02, run the Sena Motorcycles App and you can configure its settings directly from your smartphone. You can download the Sena Motorcycles App for Android or iPhone from Google Play Store or App Store.

13
Troubleshooting Factory Reset

10″ Press

Tap Double Tap

Tap

Fault Reset
If the Boom! Audio HD-N02 is not working properly for any reason, reset by gently pushing the pin-hole reset button as shown below.

Partially pull out the neck roll from the rear side of the helmet

Customer Support: www.H-D.com/infotainment-support

Boom! Audio HD-N02 Quick Reference

Type

Operation

Button Command

LED

Power on
Basic Function Power off

Press and hold the Center Button and the (+) Button for 1 second
Press and hold the Center Button and the (+) Button for 1 second

Solid blue Solid red

Volume adjustment Tap the (+) Button or the (-) Button

–

Answer mobile phone call

Tap the Center Button

–

Mobile End mobile phone call Press and hold the Center Button for 2 seconds

–

Phone Voice dial

Press and hold the Center Button for 3 seconds

–

Speed dial

Press and hold the (+) Button for 3 seconds

–

Reject incoming call Press and hold the Center Button for 2 seconds

–

Mesh Intercom on/off Tap the Mesh Intercom Button

–

Channel setting

Double tap the Mesh Intercom Button

–

Mesh Mesh Grouping

Press and hold the Mesh Intercom Button for 5 seconds

–

IntercomTM Reset Mesh

Press and hold the Mesh Intercom Button for 8 seconds

–

Enable/Disable Mic

Press and hold the Mesh Intercom Button for 1 second

–

Intercom pairing

Press and hold the Center Button for 5 seconds Red flashing Tap the Center Button of any one of the two headsets

Start/End each intercom Tap the Center Button

–

Intercom End all intercoms

Press and hold the Center Button for 1 second

–

Start Group Intercom

Tap the (+) Button and the (-) Button at the same time

Green flashing

End Group Intercom Press and hold the Center Button for 1 second

–

Play/Pause Bluetooth music

Press and hold the Center Button for 1 second

–

Music Track forward/back

Press and hold the (+) Button or the (-) Button for 1 second

–

FM radio on/off

Press and hold the (-) Button for 1 second

–

Select preset

Press and hold the Center Button for 1 second

–

Seek stations

Double tap the (+) Button or the (-) Button

–

FM Radio Scan up FM band

Press and hold the (+) Button for 1 second

–

Stop scanning

Press and hold the (+) Button for 1 second

–

Save preset while scanning

Tap the Center Button

–

www.H-D.com/infotainment-support
2.2.0_EN_September2022

References

• Login | Harley-Davidson SIP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>