PROLED L65XT903 Flex Strip Xtreme Mono Light User Manual

PROLED L65XT903 Flex Strip Xtreme Mono Light

Specifications

1. Type / Typ: FLEX STRIP XTREME MONO
2. Input voltage / Eingangsspannung: DC 24V
3. Power / Leistungsaufnahme: 14.4 W/m
4. Dimension / Abmessungen: 6 x 13.5 mm
5. LED quantity / Anzahl: 60 LEDs/mtr
6. Min. cutting length / Min. Schnittabstand: 100mm (6 LEDs)
7. Max. running length: 10mtrs
8. Protection rate / Schutzklasse: IP67

Product Usage Instructions

Warning and Caution

• Before making any cuts, installation, maintenance, or connection, ensure the mains are disconnected.
• All connector joints must be connected correctly.
• Operate the flex strip according to instructions and confirm the work voltage matches.

Specifications

1. Type / Typ: FLEX STRIP XTREME MONO

2. Input voltage: DC 24V

3. Power: 14,4 W/m

4. Dimension: 6 x 13,5 mm

5. LED quantity: 60 LEDs/mt

6. Min. cutting length / Min.

7. Max. running length: 10mtrs

8. Light color: Warm White, Neutral White, White

9. Min. bent diameter: 30 mm

10. Do not twist the light.

11. Protection rate
    All connector joints must be connected correctly to achieve an IP65 rating.

12. Can be cut and extended.

13. Working ambient temperature / : -20°C – 45°C

14. Operating (bending) ambient temperature: 0°C – 45°C

ACCESSORIES

IP65 Accessories Kit

WARNING AND CAUTION

1. Before making any cuts, installation, maintenance or connection, be sure the mains is disconnected!

2.  NOTE: ALL CONNECTOR JOINTS MUST BE CONNECTED CORRECTLY TO
   ACHIEVE IP65 RATING.

3. Please operate this flex strip by instructions, and confirm the work voltage, it must be matched with product requirements

4. Please confirm the polarity of the connector before insertion front connection cable.

5. Connect and cut this product correctly. Any wrong operation will damage this product.

6. No pressing on this product during storage, long term pressing may lead to dama

7. Using a qualified DC power supply.

8. Min. bending diameter 30mm, see Fig.1.

9. Do not twist the light as Fig.2 and Fig.3.

10. Do not hang this flex strip in the sky as Fig.4. / Nicht in der Luft aufhängen wie in Fig. 4

11. Cutting at the wrong location will fail in light! See Fig.5.

CAUTION

1. Suitable for mounting on normally flammable surfaces
2. Use only factory-recommended connectors and accessories.
3. To ensure its long life span, operate the light properly in accordance with the instructions.

ASSEMBLY AND INSTALLATION

1. Turn off the electricity before operation.
2. Cutting the light at correct location (if needed).
3. Assemble light according to Fig.8

FIGURES BILDER

Steps

LIMITED WARRANTY

In case of quality problems, we provide free repair or replacement within one year from the day of purchase, if this product has been used properly by the user’s manual, except in the following cases:

1. Any defects caused by the wrong operation.
2. Any damages caused by unauthorized removal, maintenance, modification, or incorrect connection.
3. Any damages due to transportation, vibration, etc. after purchase.
4. Any damages caused by an earthquake, fire, lightning, pollution, and abnormal voltage.
5. Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near harmful chemicals.
6. The product has been updated

SAFETY WARNINGS

1. Please don’t install this Flex Strip Xtreme during thunderstorms, or intense magnetic or high-voltage electrical fields. To reduce the risk of component damage and fire caused by a short circuit,  make sure, that all connections are correct.
2. Always be sure to mount this unit in an area with proper cooling to avoid overheating.
3. Check the voltage and power requirements of the Flex Strip Xtreme as well as the polarity of the power supply.
4. Never connect any cables while power is on and always ensure correct connections to avoid
5. short circuits before switching on.
6. For update information please consult your supplier.

FAQs

Q: Can I twist the light strip?

A: No, twisting the light strip is forbidden. Follow the correct bending way as shown in the manual.

Q: What is the maximum running length of the flex strip?

A: The maximum running length is 10 meters.

References

• PROLED: proled.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>