PROLED L7MA0xx0608 18 Watt Ceiling Down Light Instruction Manual
- July 9, 2024
- PROLED
Table of Contents
PROLED L7MA0xx0608 18 Watt Ceiling Down Light
Specifications:
- Product Name: PROLED DOWNLIGHT ACTOR
- Available Sizes: XS, S, M, L, XL
- Model Number: L7MA0xx0608
- Manufacturer: MBN GmbH
- Address: Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
- Website: www.proled.com
- Energy Efficiency Class: C
- Indoor Use Only or Secured Wet Room (IP54)
Product Usage Instructions
Installation:
- Switch off the electricity at the mains before commencing installation or lamp change.
- If a fuse box is installed, remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
- Connect the driver to a power supply of 230VAC or 180-260 VDC.
- Ensure all connections are tight with no loose strands.
- Make sure fire regulations are not breached when fitting your lights.
- If you are unsure about the instructions, consult a qualified electrician.
Maintenance:
Replacement of the light source is possible with commonly available tools. The
light source can be separated for testing purposes. Installation and
commissioning should only be performed by qualified persons following national
installation regulations.
Remember to disconnect luminaires from mains before any work.
FAQ:
-
Q: Can I use this product outdoors?
A: No, this product is designed for indoor use only or secured wet rooms with an IP54 rating. -
Q: What should I do if the cable is defective?
A: Do not use the luminaire if the cable is defective. Contact a qualified electrician for assistance. -
Q: Can I replace the light source myself?
A: Yes, replacement of the light source is possible with commonly available tools. Ensure to disconnect the luminaire from mains before performing any work.
Characteristics
- SMD LED Warm White or Neutral White selectable
- Power consumption selectable 5,5 W / 8,0 W (XS), 14 W / 19 W (M / L), 15 W / 21 W (L / XL)
- Metall housing round
- Mounting ring colour White
- The reflector ring colour silver
- Beam angle 75° (XS), 80° (S / M), 90° / 100° (L / XL)
- Driver 220-240 VAC or 180-260 VDC
- Not dimmable
- Operating temperature range -10° C till +45° C
- CE compliant with applicable European directives
Warning:
- For indoor use only or secured wet room (IP54)
- Please ensure that the packaging is disposed of in a safe environment
- If the cable is defective, do not use luminaire
- We do recommend that a qualified electrician should be used to install the products
- Do not look at the lighted lamp directly
Safety indices:
Be sure to have a qualified electrician complete the installation. The customer is not entitled to claim for any lights installed without observing European safety directives. The manufacturer is then discharged from liability when damage is caused by improper use or installation. If any luminaire is subsequently modified, the person responsible for the modification shall be considered as manufacturer. Do not cover lamps with heat-insulating materials. For indoor use only. Protection class IP54.
Installation
Please follow the sequence of installation step by step.
- Switch off the electricity at the mains before commencing installation or lamp change and (if a fuse box is installed) remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
- Connect driver to power supply 230VAC or 180-260 VDC
- Make sure all connections are tight with no loose strands
- Ensure fire regulations are not breached when fitting your lights
- If you are in any doubt regarding these instructions, consult a qualified electrician
Remark to the energy efficiency class of the light source:
This product contains a light source of energy efficiency class C:
Attention:
This product counts as a „containing product“ according to directive (EU)
2019/2020 and (EU) 2019/2015.
- The light source is part of the containing product. This product can separate the light source and the containing product using commonly available tools.
- Replacement of the light source, using commonly available tools, is possible with this product.
- The light source can be separated for testing purposes.
Installation and commissioning may only be performed by qualified persons.
National installation regulations must be observed.
Luminaires must be disconnected from the mains before any work.
DIMENSION
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
www.proled.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>