ZASS ZACF-01 Standing Air Circulating Fan Instruction Manual

ZASS ZACF-01 Standing Air Circulating Fan

Specifications

• Model : ZACF 01
• Voltage / Frequency: 220-240V / 50/60Hz
• Adjustable Height : 81 – 105 cm
• Power: 50W
• Noise Level: < 59 dB(A)
• Protection Class : Class II

Product Usage Instructions

General Information and Safety Precautions
Before operating the unit, carefully read the precautions in the manual. Do not allow the control panel to get wet. In case of any moisture contact, turn off the power and disconnect the fan immediately.

Key to Machine Parts

1. Adjustable stand (81 to 105cm);
2. Control panel;
3. Aroma holder;
4. Front grill;
5. Back grill;
6. Support rack;
7. Base;
8. Oscillation;

Product Instructions

Aroma Installation Instructions:

1. Turn the cap of the aroma holder in the center anti-clockwise.
2. Remove the pad, pour aroma liquid onto it, and put it back into the cavity.
3. Put the cap back in place and turn clockwise to close.

Assembly Instructions:

1. Remove all parts from the carton box.
2. Remove the screw from the bottom of the stand.
3. Place the stand into the hole in the base.
4. Place the screw into the hole in the base and tighten.
5. Install the main part by rotating it into the stand.

Cleaning and Maintenance
Refer to the manual for cleaning and maintenance instructions to ensure optimal performance and longevity of the product.

Remote Control
Important Notice: The remote control contains a button battery type CR2025. In case of swallowing, seek immediate medical help as it can be dangerous. Dispose of flat/dead batteries safely.

Congratulations on purchasing this ZASS product. Like all ZASS products, this product was designed on the basis of the latest technical knowledge and was manufactured using the most reliable and modern electrical / electronic components.
Before putting the appliance into operation, please allow yourself a few minutes to read the following instructions for use.
Thank you !

Carefully read the precautions in this manual before operating the unit!

NEVER INSERT FOREIGN OBJECTS SUCH AS FINGERS, PENCIL, ETC. THROUGH THE FAN GRILLS!

GENERAL INFORMATION and SAFETY PRECAUTIONS

CAUTION!
DO NOT allow the control panel to get wet in any circumstances. Turn the power off and disconnect the fan from the power supply immediately.

• DO NOT use this product in specific circumstances:
  • Outdoors
  • Damp conditions
  • Areas subject to direct sunlight
  • Corrosive or explosive environment
  • Extreme temperatures.
• DO NOT use this fan in the immediate surroundings of a bath, shower, or swimming pool.
• DO NOT use next to objects which may get caught in the mechanism, such as curtains.
• DO NOT place on an unstable surface.
• DO NOT plug the fan into the wall socket or turn it on before being properly assembled.
• DO NOT insert objects into the metal mesh of the fan head.
• Particular attention has to be given where children and vulnerable people are present. Children 3 years and younger should be continually supervised when near the heater. Children aged from 3 to 8 years shall only switch on/off the appliance if it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 to 8 year shall not plug in, regulate and clean the appliance or perform user maintenance.
• Confirm the power is compliant with the label.
• DO NOT use if there is visible signs of damage to the product and/or cable, if the product has been dropped or has been mis-used. Changing the power cable must only be performed by a qualified person.
• DO NOT place this product under a power socket when in use.
• DO NOT touch or unplug with wet hands.
• When moving, or not in use, the fan must be unplugged from the power supply.
• This product is for domestic use only. Not suitable for commercial purposes.
• For indoor use only.
• Any disassembly of the product will render the guarantee null and void.
• DO NOT leave the fan switched on when your property is vacant.
• DO NOT cover any part of the fan.

Important Notice:

• DO NOT allow the control panel to get wet in any circumstances. Turn the power off and disconnect the fan from the power supply immediately.
• There should be no power to the fan when the fan is being cleaned.

KEY TO MACHINE PARTS

1. Adjustable stand (81 to 105cm);
2. Control panel;
3. Aroma holder;
4. Front grill;
5. Back grill;
6. Support rack;
7. Base;
8. Oscillation;
9. Timer;
10. Speed;
11. ON/OFF;
12. ON/OFF button.
13. Fan speed;
14. Oscillation up and down;
15. Oscillation left and right;
16. Timer – up to 12 hours.

PRODUCT INSTRUCTIONS

Aroma Installation Instructions

1. Turn the cap of the aroma holder in the center anti clockwise. (Fig. 1)
2. Remove the pad from its cavity and carefully pour your aroma liquid on to the pad. (Fig. 2)
3. Put the pad back into the cavity.
4. Put the cap back in place and turn clockwise to close (Fig. 3)

Assembly Instructions
Remove all parts from the carton box:

1. Remove the screw from the bottom of the stand
2. Place the stand into the hole in the base
3. Place the screw into the hole in the base and tighten;
4. Install the main part by rotating it into the stand.

CONTROL PANEL

• ON/OFF : When plugged in for the first time the fan will beep and all the digits will flash once to indicate that the fan is set to stand-by mode. Press the On/Off button once to turn the fan on.

• Oscillation : Press the two-direction oscillation button. One quick touch will turn on the left-right swing. A second quick touch will turn the left-right swing off. To turn on the up-down swing, hold the button for
  3-seconds. A second 3-second hold will turn the up-down swing off.

• Speed: There are 3 speed settings. The default fan speed when plugged in is 1. Press once to increase to 2, press again to increase to 3. Pressing the speed button again will take the fan back to 1. The next time the product is turned on the previous setting will be retained.

• Timer : The timer will allow the fan to continue working for a set time. To use this function, press the button until the required time is reached, up to a limit of 12 hours. Each press equals 1 hour. The time is displayed as ‘0H’, ‘1H’… to ‘12H’ .

• Display Screen: The screen will display the fan speed and timer. When first turned on the screen display will read as ‘ ‘.The screen will turn off if there is no operation for 3 minutes and can be awakened by touching any of the buttons.

REMOTE CONTROL

IMPORTANT NOTICE
The remote control contains a button battery type CR2025. IF SWALLOWED IMMEDIATELY SEEK EMERGENCY MEDICAL HELP. Swallowing may lead to serious injury or death in as little as 2 hours. Dispose of button batteries immediately and safely. Flat/dead batteries can still be dangerous.

CLEANING AND MAINTENANCE

Turn the fan off and remove from the power supply. Allow the fan to cool down. Clean the outside of the fan by wiping with a damp cloth and buff with a dry cloth and avoid any water entering the fan. Avoid using the damp cloth near to or over the control panel. Do not use any detergents or abrasives. Gently hoover the fan mesh to remove dust. Always allow to dry thoroughly before use. It is recommended to clean the product every 2 months and when preparing to store the product. Remove the lithium battery from the remote control to prevent leakage.

Storing the fan:
Ensure the product has been turned off and the power cable is unplugged from the electrical outlet before storing. Allow the product to completely cool before handling. When the fan is not in use for a long period of time it should be protected from dust and stored in a clean, dry place. Do not place any heavy items on top of the fan.

TECHNICAL SPECIFICATIONS

IMPORTANT INFORMATION CONCERNING THE CORRECT DEFECTS OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19 / EU
Worn electrical appliances are valuable materials, which is why their place is not in household waste! For this reason, please support and participate in the protection of natural resources and the environment by handing this appliance to their take-over centers or to the importer whose address you can find in this manual or in the warranty certificate. By removing home appliances separately, you will avoid the potential negative consequences that your environment and health may have on the wrong removal, and you will be able to capitalize on the constituent materials to save energy and resources. Further details may be requested from your local government or your nearest collection point. Inappropriate waste disposal may, in accordance with national regulations, be amended. The separate decommissioning of an electrical appliance is specified by marking the product with the image of a cut bay. This product does not contain hazardous materials for the environment (lead, mercury, cadmium, hexavalent chromium and brominated flammable agents: PBB and PBDE). We assume the right to make changes to these provisions without further notice.

www.zassromania.ro

FAQ

Q: Does this product comply with safety standards?
A: Yes, this appliance complies with European electromagnetic safety and compliance standards.

Q: Are there any hazardous materials used in this product?
A: No, this product does not contain hazardous materials for the environment.

References

• ZASS ROMANIA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>