tp-link VR300 Archer Modem Router User Guide
- June 15, 2024
- tp-link
Table of Contents
tp-link VR300 Archer Modem Router
Specifications
| FAQ Topic | Instructions |
|---|---|
| Login Page Issues | Check IP settings, try different browser, restart modem, |
disable security software.
LED Status Incorrect| Check connections, factory reset, remove DSL splitter,
contact ISP, contact TP-Link support.
Internet Access Issues| Check network cables, use default address, verify ISP
settings, factory reset, contact TP-Link support.
Forgotten Password| Refer to FAQ, manage web page login for password reset
options.
Factory Default Reset| Press and hold RESET button, use web management page to
reset.
FAQ
How do I resolve login page issues?
Ensure your computer is set to obtain an IP address automatically, check the URL, try a different browser, restart the modem router, and disable computer security software.
What should I do if the LED status is not correct?
Reconnect cables and power supply, perform a factory reset, remove the DSL splitter, check the DSL line with your ISP, and if necessary, contact TP-Link support.
What steps should I take if I cannot access the internet?
Verify network cable connections, connect to the default modem router address, confirm ISP settings (PPPoE, VLAN ID, connection type, username, password), factory reset, and if the problem persists, contact TP-Link support.
What can I do if I have forgotten my password?
Check the FAQ for instructions to create a new password or use the password reset option. If that's not possible, log in to the web management page to retrieve or reset your password.
How can I reset the modem router to factory default conditions?
Press the RESET button on the modem router for at least 5 seconds until the LEDs change state, or use the web management page to perform the reset.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>