ZASS ZHP 04A Electric Hob Instruction Manual
- June 4, 2024
- ZASS
Table of Contents
ZASS ZHP 04A Electric Hob
Congratulations on purchasing this ZASS product. Like all ZASS products, this
product was designed on the basis of the latest technical knowledge and was
manufactured using the most reliable and modern electrical/electronic
components.
Before putting the appliance into operation, please allow yourself a few
minutes to read the following instructions for use.
Thank you !
Carefully read the precautions in this manual before operating the unit!
CAUTION: Hot surface!
The hotplate is very hot, be careful not to cause burns or other injuries
GENERAL INFORMATION and SAFETY PRECAUTIONS
CAUTION!
PLEASE ENSURE THAT THE APPLIANCE IS IN SAFE AND SECURE POSITION BEFORE USING
TO AVOID ANY KIND OF INJURIES!
- After unpacking, make sure that the appliance is intact with no signs of damage caused by transport, if in doubt, do not use the appliance and contact the dealer.
- Before connecting the appliance, make sure that its rating corresponds to that of power supply. The plate is on the bottom of the appliance.
- Do not use the appliance for purpose other than intended household use. When the usage is over, the power supply should be turned off.
- Do not use the appliance for outdoors.
- If you observe that there is a crack on the heating plate, the power supply should be switched off immediately.
- The appliance is designed only for heating and cooking food and must be used only when cooking utensils are placed on it.
- Do not immerse the appliance in any liquid.
- Cooking utensils, regardless of the size, should not be projected beyond the hot plate or intruded into a close area.
- Don’t touch the surface of the hot plate when the appliance is in use and getting hot. The temperature of the accessible surface may be high when the appliance is operating.
- Do not allow the cord to get in touch with any hot surface of the hot plate.
- Do not leave the appliance unattended when oil is to be heated.
- Close supervision is necessary when the appliance is used by or near children.
- Before carrying out any cleaning or maintenance, disconnect the appliance from the mains by removing the plug.
- The appliance must be cooled down completely before storing.
- If the cord is damaged and needs replacement, it must be replaced by the manufacturer’s service agent or similarly qualified technician in order to avoid hazard
- The appliances are not intended to be operated by means of an external timer or separate remote-control system.
- This appliance is not to be used by children or persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction.
- Children being supervised not to play with the appliances.
DESCRIPTION OF THE APPLIANCE (Page 2)
Anti-slip feet;
Operation indicator light;
Body;
Hot plate;
Thermostat power control.
USAGE
WARNING: PLEASE ENSURE THAT THE APPLIANCE IS IN SAFE AND SECURE POSITION BEFORE USING.
-
Before using your hot plate for the first time, turn the hot plate to the highest setting (position 5) for 3 to 5 minutes to protect the coating. This should be done when there is no cooking utensil on the hot plate.
-
Switch on the appliance. When the indicator light turns on, the appliance is in use.
-
Turn the control to the required position, to achieve the desired
COOKING TEMPERATURE
-
The indication light at the front of appliance will turn off when the hot plate reaches the selected temperature, and the procedure of the heating and stopping will recycle to maintain the temperature.
-
When not in use, be sure to turn the control to the MIN position and disconnect from the power outlet.
-
Some requirements of the cooking utensils:
a) For the most efficient use, the cooking utensil should have a solid base that is as even as possible.
b) The cooking utensils base diameter should be smaller than the diameter of the hot plate.
c) Do not use cooking utensils with convex, concave or uneven bottom.
CLEANING
Important: Before you do any of the following, make sure the appliance is unplugged from the mains supply.
- Disconnect the plug from the socket.
- Clean the appliance with a soft cloth, do not use abrasive (cleaning) material.
TECHNICAL SPECIFICATIONS
| Model | ZHP 04A | ZHP 05A/08S | ZHP 06A/07S |
|---|---|---|---|
| Voltage / Frequency | 220-240V / 50Hz | 220-240V / 50Hz | 220-240V / 50Hz |
| Power | 1000W | 2000W | 1500W |
| Class of protection | Class I | Class I | Class I |
| Double Hotplate | No | Yes | No |
IMPORTANT INFORMATION CONCERNING THE CORRECT DEFECTS OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2012/19 / EU
Worn electrical appliances are valuable materials, which is why their place is
not in household waste! For this reason, please support and participate in the
protection of natural resources and the environment by handing this appliance
to their take-over centers or to the importer whose address you can find in
this manual or in the warranty certificate. By removing home appliances
separately, you will avoid the potential negative consequences that your
environment and health may have on the wrong removal, and you will be able to
capitalize on the constituent materials for saving energy and resources.
Further details may be requested from your local government or your nearest
collection point. Inappropriate waste disposal may, in accordance with
national regulations, be amended. The separate decommissioning of an
electrical appliance is specified by marking the product with the image of a
cut bay.
This appliance complies with European electromagnetic safety and compliance standards.
We assume the right to make changes to these provisions without further
notice.
SC ZASS ROMANIA S.R.L. is not responsible for any printing errors, images or
product features.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>