onvis S4 Smart Plug User Guide

onvis S4 Smart Plug

QUICK START GUIDE

1. Make sure of a Thread network of a Thread Matter hub.
2. Reset the S4 smart plug by long pressing the power button for 15 seconds until its LED blinks slowly.
3. Make sure the S4 is within Bluetooth range with your phone, and under coverage of the Thread network.
4. Launch the app (Apple Home, Google Home, Alexa or SmartThings) of the respective ecosystem hub to add S4.
5. Tap’+’, and scan the Matter QR code on device or on user manual, or manually input the setup code.
6. Name the 54 and assign it to a room.
7. Talk to the voice assistant or use the ecosystem app to control On/Off.

Tips

1. The Matter QR/setup code can be used in the FIRST ecosystem Only.
2. To add 54 to another Thread Matter ecosystem, please generate a new QR/setup code from the previous ecosystem app.
3. Use the ecosystem app to create schedules, automations and scenes.
4. Use the ecosystem cloud to control 54 away from home.
5. After setting up, S4 will act as a Thread router to extend your Thread network.
6. Occasionally, the Thread network gets unstable, especially when a new device is added. It might take up to 24 hours for the Thread network to heal and adapt to the new structure.
7. When S4 is unplugged, please wait at least 5 seconds before plugging it back to power.

Onvis Smart Plug 54 Overview

For Apple Home:

1. Apple Thread Matter hubs include: HomePod mini, HomePod(2nd Gen), Apple TV4K(2021).
2. The use of an Apple Home accessory needs the follow permissions:
   • Settings>iCloud>iCloud Drive> Tum On
   • Settings>iCloud>Keychain> Turn On

For Google Home:
Google Thread Matter hubs (by 2023) are: Nest Hub Max and Nest Hub (2nd gen).
For Alexa: (Thread support TBD)
Alexa Thread Matter hubs (by 2023) are: 4th-Gen Echo smart speaker.

For SmartThings;
SmartThings Thread Matter hubs is: Samsung SmartThings Station.

Specifications

• Model: 54
• Input AC 120V-, 60Hz
• Output: Max. 1 SA/ 1800W
• Wireless Connection: 802.15.4 (Thread)
• Commission: Bluetooth
• Dimension: 653951 mm
• Net Weight: 65g
• Material: VO Fire-resistant PC
• Operating Temperature: 0-40 t: (32°F-104°F)
• Operating Humidity: 5%-95% RH
• Usage: Indoor use only

FAQ

1. Why did I fail to set up my Onvis 54 smart plug ?
2. Make sure Bluetooth is enabled in your iOS device.
3. Make sure the 54 is within Bluetooth range of your iOS device.
4. Make sure your Thread network is in place and working, and the S4 is within Thread coverage.
5. Input the correct MATTER setup code.
6. Make sure the ecosystem app and hub supports Thread and Matter commissioning. An Android device and app are required to commission to Google, Alexa and Smart­Things hubs(as of Jan 2023).
7. No Response
8. If the connection of 54 and the Thread network is too weak due to long distance, try deploying a Thread router device to expand Thread network.
9. When used in multi-ecosystems simultaneously, there might be delays or even failures.

Warnings

• Indoor use only.
• Keep children away from the smart plug.
• Remove smart plug from power outlet before cleaning.
• Plug in power outlet directly. No extension power cord.
• Do NOT clean with liquid.
• Do NOT use over the electrical ratings.
• Do NOT attempt to repair the smart plug.
• Do NOT use in wet or damp areas.
• Do NOT use with devices that should not be operated unattended.

WEEE Directive Compliance
This symbol indicates that it is unlawful to dispose of this product together with other household waste. Please take it to a local recycling center for 8 used equipment

FCC Compliance Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit differem from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.

www.onvistech.com

support@onvistech.com

@12-month warranty
Lifetime technical support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>