NINGBO 256002 Wireless Charging Speaker User Manual
- July 5, 2024
- Ningbo
Table of Contents
NINGBO 256002 Wireless Charging Speaker User Manual
Overview
1. Wireless Charging Pad
2. Vol-/Previous Track
3. Play/Pause/ON/OFF
4. Light button
5. Vol +/Next Track
6. Wireless Charging LED Indicator 1
7. Charging/Buletooth LED Indicator
8. Wireless Charging LED Indicator 2
9. TYPE-C charging port
Specifications:
1. Model: SL525-10W
2. Item：256002
3. Wireless Output Power : 5W / 10W
4. Input: DC 5V / 2A 9V / 2A
5. Battery capacity: 3.7V/1800mAh 6.66Wh
6. Speaker output power:3W
Operation Instructions
1. Power On : Hold the “ ” button for 3 seconds to turn on the speaker.
The indicator light will turn blue and you will hear a tone.
2. Pairing : Once speaker is turned on, using your mobile device, search
for Bluetooth devices and select Bluetooth ID ‘256002’. It will pair
automatically.
3. Power Off : Hold the “ ” button for more than 3 seconds to turn off
the speaker.
4. Play/Pause : Tap the “ ” button once to pause/play music.
5. Next track/Vol+ : Tap the ” + ” button once to switch to next
track. Hold the “ + ” for 3 seconds to increase music volume.
6. Previous Track/Vol- : Tap the “ – ” button once to return to
previous track. Hold the ” − ” for 3 seconds to decrease music volume.
7. Light : Tap the “ ⚙️ ” button to cycle between 3 brightness
settings: “High,” “Low,” and “Off.”
8. Charging Speaker : Use the USB cable included to connect the speaker
to an adaptor. The LED indicator will display a solid red light. When the
speaker is fully charged, the red light will turn off.
9. Wireless charging : Use the USB cable included to connect the speaker
to a certified adaptor. The wireless LED indicator 1 will display a solid red
light. Place a Qi enabled mobile device on top of the charging pad. The
wireless LED indicator 1 will turn off, the wireless LED indicator 2 will
display a solid green light. The mobile device will begin to charge
automatically.
Attention:
1. Prolonged or repeated exposure to sounds in excess of 85dBA can cause
hearing loss.
2. To prevent damage to the speaker, do not drop or bump. Avoid exposure to
water, high temperature and high humidity.
3. Keep away from children.
4. Music volume decreasing, distorting, slowing or silencing may indicate low
power level. The battery will need to charge.
5. Please do not disassemble the speaker.
6. When not in use the device will turn off automatically. Please disconnect
from power source.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This device complies with Part 18 of the FCC Rules.
- The interference potential of the device or system.
- Maintenance of the system.
- Simple measures that can be taken by the user to correct interference.
- For RF lighting devices, provide an advisory statement, either on the product packaging or with other user documentation, similar to the following:
This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by (ShenZhen C-Star Electronic Tech. Co., Ltd.) is under license. Other trademarks and trade names are those of their respective owners.
Bluetooth Listing Declaration ID:D063501
FCC ID: 2BCGV0006
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RF Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>