NINGBO 29062 Disco Light Up Bluetooth Speaker Instruction Manual
- July 6, 2024
- Ningbo
Table of Contents
NINGBO 29062 Disco Light Up Bluetooth Speaker
Functions
- ON/OFF Button
- LED Indicator
- Type-C input port
- Disco Light
What’s included
- 1 x Bluetooth Speaker
- 1 x USB to Type-C Charging Cable
- 1 x Instruction Manual
- 1 x Lanyard
Tech Specifications
- Model: CT02103
- Item No.: 29062
- Input: DC 5V/ 500mA
- Battery capacity: 200 mAh
- Speaker output power: 3W
Instructions
Be sure to fully charge the speaker before using it for the first time.
- Charging the Speaker
- Connect the provided charging cable to a power source and the Type-C port on the speaker (3).
- The LED indicator light will glow red when charging and turn off when fully charged.
- Bluetooth Setup:
- Press and hold the ON/OFF Button to turn ON the device.
- Turn on the Bluetooth function on a mobile device, Select the “29062” pairing name.
- The speaker will automatically pair if the mobile device has been paired before.
- Press and hold the ON/OFF Button to turn OFF the device.
- DISCO LIGHT:
- To turn OFF/ON the disco light function, double press the ON/OFF button.
SAFETY PRECAUTIONS
WARNING- When using this product, basic precautions should always be followed.
- Read all the instructions before use.
- Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
- The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device above its output rating. Overloading outputs above the rating may result in a risk of fire or injury.
- Do not use the device if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause an explosion.
- Ensure that qualified service professionals use only identical replacement parts to ensure product safety.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
- Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by (ShenZhen SHD Electronic Tech. Co., Ltd.) is under license.
- Other trademarks and trade names are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>