RAB WPX Premium Field Adjustable Wall Packs Owner’s Manual

July 4, 2024
RAB

**RAB WPX Premium Field Adjustable Wall Packs Owner’s Manual

**

TECHNICAL SPECIFICATIONS

COMPLIANCE

UL Listed
Suitable for wet location
DLC Listed
This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC
Member Utilities. Designed to meet DLC 5.1 requirements.

MODEL# DLC ID
WPX1 S-MW1VZF
WPX2 S-QGK4HV
WPX3 S-10CCLB
WPX2/480 S-CK3MPC
WPX3/480 S-NQRGMQ

LED CHARACTERISTICS

LEDS
Long-life, high-efficacy, surface-mount LEDs

PROJECT:
DATE:
TYPE:
**PREPARED BY:

**

KEY FEATURES

  • Premium wall pack available in three different sizes and selectable
  • wattages:
  • WPX1: 30/20/15W
  • WPX2: 80/60/40W
  • WPX3: 130/100/65W
  • CCT Adjustable: 3000/4000/5000K
  • Selectable on/off photocell
  • 120-277V & 480V
  • 0-10V dimming standard
  • Battery backup available for 120-277V models
  • Available with smart controls. Multi-sensor remote sold separately

CONSTRUCTION

IP Rating
Ingress protection rating of IP 65 for dust and water
Cold Weather Starting
Minimum starting temperature is -40°C (-40°F)
Maximum Ambient Temperature
Suitable for use in up to 40°C (104°F)
Cold Weather Starting Temperature for Battery Backup
Minimum starting temperature is 1°C (33.8°F)
Maximum Ambient Temperature for Battery Backup
Suitable for use in up to 60°C (140°F)
Housing
Precision die-cast aluminum housing and door frame
Mounting
Hinged wiring access and conduit entries on the back sides, top and bottom make installation a snap
Lens
Borosilicate glass
Gasket
High-temperature silicone gasket
Reflector
Aluminum
Green Technology
Mercury and UV free. RoHs-compliant components.
Finish
Formulated for high durability and long lasting color

ELECTRICAL

Drivers:
Constant Current, Class 2, 120-277V, 50/60 Hz

WPX1-30W: 0.28A at 120V, 0.14A at 208V, 0.13A at 240V, 0.12A at 277V
WPX1-20W: 0.22A at 120V, 0.10A at 208V, 0.8A at 240V, 0.7A at 277V
WPX1-15W: 0.14A at 120V, 0.7A at 208V, 0.6A at 240V, 0.5A at 277V

WPX2-80W: 0.66A at 120V, 0.39A at 208V, 0.33A at 240V, 0.30A at 277V
WPX2-60W: 0.48A at 120V, 0.29A at 208V, 0.25A at 240V, 0.23A at 277V
WPX2-40W: 0.34A at 120V, 0.19A at 208V, 0.17A at 240V, 0.16A at 277V

Constant Current, Class 1, 120-277V, 50/60 Hz
WPX3-130W: 1.10A at 120V, 0.63A at 208V, 0.55A at 240V, 0.48A at 277V
WPX3-100W: 0.84A at 120V, 0.48A at 208V, 0.42A at 240V, 0.37A at 277V
WPX3-65W: 0.55A at 120V, 0.32A at 208V, 0.27A at 240V, 0.26A at 277V

Constant Current, Class 2, 480V, 50/60 Hz

WPX2-80W: 0.18A at 480V
WPX2-60W: 0.14A at 480V
WPX2-40W: 0.11A at 480V

Constant Current, Class 1, 480V, 50/60 Hz

WPX3-130W: 0.30A at 480V
WPX3-100W: 0.25A at 480V
WPX3-65W: 0.18A at 480V

THD
WPX1-30W: 2.8% at 120V, 20.6% at 277V
WPX1-20W: 3.2 at 120V, 11.9% at 277V
WPX1-15W: 5.1% at 120V, 9.3% at 277V

WPX2-80W: 2.5% at 120V, 3% at 277V
WPX2-60W: 2% at 120V, 12% at 277V
WPX2-40W: 2% at 120V, 3.7% at 277V

WPX2-80W: 7.2% at 480V
WPX2-60W: 10.6% at 480V
WPX2-40W: 16.1% at 480V

WPX3-130W: 4.1% at 120V, 7.2% at 277V
WPX3-100W: 4.4% at 120V, 8.9% at 277V
WPX3-65W: 5.1% at 120V, 12.2% at 277V

WPX3-130W: 13.3% at 480V
WPX3-100W: 14.6% at 480V
WPX3-65W: 17.9% at 480V

Dimming Driver:
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.

Power Factor
WPX1-30W: 99.7% at 120V, 93.5% at 277V
WPX1-20W: 99.6 at 120V, 90.2% at 277V
WPX1-15W: 98.9% at 120V, 81.6% at 277V

WPX2-80W: 99.7% at 120V, 95% at 277V
WPX2-60W: 99.6% at 120V, 91% at 277V
WPX2-40W: 99.2% at 120V, 84.8% at 277V

WPX2-80W: 91.3% at 480V
WPX2-60W: 85.8% at 480V
WPX2-40W: 78.2% at 480V

WPX3-130W: 99.8% at 120V, 95.9% at 277V
WPX3-100W: 99.7% at 120V, 93.7% at 277V
WPX3-65W: 99.3% at 120V, 87% at 277V

WPX3-130W: 90% at 480V
WPX3-100W: 87% at 480V
WPX3-65W: 79.9% at 480V

Photocell
Selectable On/Off Photocell included

Emergency Light Loss Factor
WPX2: 0.08
WPX3: 0.073

Surge Protection
WPX1/WPX2: 4/4kV
WPX3: 6/6kV

Note
All values are typical (tolerance +/- 10%)

FIELD ADJUSTABLE

Adjustable CCT: 3000K/4000K/5000K (factory default 4000K)
Selectable Wattage:
WPX1: 30W/20W/15W (factory default 30W)
WPX2: 80W/60W/40W (factory default 80W)
WPX3: 130W/100W/65W (factory default 130W)

LIGHTCLOUD (OPTIONAL)

Lightcloud Controller Installed:

  • Integrated/embedded networked lighting control
  • Luminaire-level lighting control
  • Fixture, Zone, and plug-load control from one powerful device
  • LLLC – Capable of switching, 0-10V dimming, power/energy monitoring
  • Can also be used to extend the range of Lightcloud
  • Mesh network communication protocols
  • Offers the capability to set the maximum light output to a less-thanmaximum state of an individual luminaire at the time of installation or commissioning. The High-End Trim functionality is field reconfigurable via the Lightcloud mesh network communication protocols.
  • The Lightcloud Controller can be attached to the fixture, junction box, or electrical panel
  • DLC system – N1XMLOEATBA
  • Communication Protocol: Zigbee
  • Line of Sight: 1,000 feet
    Obstructions: 100 feet

Lightcloud Blue Installed
Lightcloud Blue is a Bluetooth Mesh wireless lighting control system that allows you to control RAB’s various compatible devices. With RAB’s patent- pending Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system’s reach.
DLC system – N1XMLOEATBA
Learn more at www.Lightcloud.com
Gateway Required: No

Communication Protocol:
Bluetooth Mesh

Range:
Up to 60 feet between standard building materials
Up to 200 feet clear line of sight

Spacing Criteria
Lightcloud Blue devices should be placed within the specified range to communicate within the Bluetooh Mesh network.

Factory Reset :
To reset the device to factory settings and into pairing mode locate the device identification button at the top of the Controller under the Lightcloud logo. Press and hold this button for 10s or until the indicator light begins flashing red. If the Controller is attached to a fixture, the fixture will also flash on/off 5x.

LIGHTCLOUD ENABLED W/MVS OCCUPANCY SENSORS

Sensor Connection Type: Pogo pin

Max Mounting Height: 50 ft.

Detection Range: 50 ft. diameter mounted at 50 ft.

Sensor Technology: Microwave (MVS)

Default Setting:

Uncommissioned State:
Motion Sensitivity: High
Brightness when triggered : 100%
Hold time: 20 minute
Standby to dim: 20%
Standby time: 1 minute
When vacant: Off
Commissioned State (Once paired, the sensor will default to disabled. Once enabled the following settings apply):
Motion Sensitivity: High
Brightness when triggered: Last on status

LIGHTCLOUD ENABLED W/MVS OCCUPANCY SENSORS

Hold time: 20 minute
Standby to dim: 20%
Standby time: 1 minute
When vacant: Off

Adjustable Sensor Settings?: Yes, using the Lightcloud Blue mobile app

Sensing Type: Occupancy or Vacancy (option to disable or set as an independent sensor)

Occupied Actions: On or On at a Dim Level
Vacant Actions: Off or On at a Dim Level
Occupancy Timeout: 1 minute to 240 minutes
Daylight Sensing: The sensor will determine to trigger the light(s) on or not based on the daylight threshold level set in the Lightcloud Blue mobile app.
Dim levels will continuously adjust to meet daylight threshold setting.
Daylight Threshold: 150 lux to 1500 lux

MICROWAVE OCCUPANCY SENSOR (OPTIONAL)

  • 2 VDC Input, IC Solution
  • On/off control
  • Operating Voltage: 10-15V
  • Detection Area: 25%/50%/75%/100%
  • Microwave Frequency: 5.8GHz ± 75MHz
  • Hold Time: 5 sec/30 sec/1 min/10 min/20 min/30 min
  • Microwave Power: <0.3mW
  • Switching Capacity: <40mA
  • Daylight Threshold: 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
  • Mounting Height: 2.5 – 4.5 m/8.2 – 14.76 ft
  • Operating Current: < 30mA
  • Stand-by Period: 0 sec/10 sec/30 sec/1 min/5 min/10 min/+∞
  • Detection Range: 3 – 7 m/ 9.84 – 22.96 Ft
  • Control Method: 0-10V
  • Stand-by Dimming Level: 10%/20%/30%/50%
  • Detection Angle: 360° (Ceiling Mounted)
  • Operating Temperature: -35°C to 70°C

Factory Default Setting:

  • Detection area 100%
  • Hold time 5sec
  • Daylight threshold Disable
  • Stand-by period 0 sec
  •  Stand-by dimming level 10%.

PERFORMANCE

Lifespan
100,000-hour LED lifespan based on IES LM-80 results and TM-21 calculations

OTHER

Warranty
The RAB 10-year, no-compromise warranty covers light output, color stability, driver performance, paint finish and labor. RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.

Buy American Act Compliance:
RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the BUY American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.

DIMENSIONS

WPX 1
**Weight:

WPX 2
Weight:

WPX 3
Weight:
**

PERFORMANCE

WPX1 (30/20/15W)| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K
---|---|---|---|---|---|---|---|---|---
Wattage| 30W| 20W| 15W
Input Watts| 33.2W| 32.4W| 33.3W| 26.5W| 26W| 26.6W| 17.9W| 17.7W| 17.9W
Lumens| 4,470| 4,739| 4,619| 3,648| 3,818| 3,764| 2,497| 2,575| 2,562
Efficacy| 134.6| 146.3| 138.7| 137.7| 146.8| 141.5| 1389.5| 145.5| 143.1
CRI| 82| 84| 82| 82| 84| 82| 82| 84| 83
Voltage Ratings| 120-277V
WPX2 (80/60/40W)| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K
---|---|---|---|---|---|---|---|---|---
Wattage| 80W| 60W| 40W
Input Watts| 79W| 76.6W| 79.3W| 57.5W| 56W| 57.8W| 40W| 39.3W| 40.1W
Lumens| 10,592| 11,353| 11,042| 8,052| 8,463| 8,386| 5,789| 5,996| 5,982
Efficacy| 134.1| 148.2| 139.2| 140| 151.1| 145.1| 144.7| 152.6| 149.2
CRI| 82| 84| 83| 82| 84| 83| 83| 84| 83
Voltage Ratings| 120-277V
WPX2 (80/60/40W)| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K
---|---|---|---|---|---|---|---|---|---
Wattage| 80W| 60W| 40W
Input Watts| 79.8W| 77.2W| 80.1W| 59.2W| 57.6W| 59.4W| 42.5W| 41.6W| 42.6W
Lumens| 10,744| 11,465| 11,183| 8,248| 8,639| 8,553| 6,033| 6,238| 6,227
Efficacy| 134.6| 148.5| 139.6| 139.3| 150| 144| 142| 150| 146.2
CRI| 82| 84| 83| 82| 84| 83| 83| 84| 83
Voltage Ratings| 480V
WPX3 (130/100/65W)| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K
---|---|---|---|---|---|---|---|---|---
Wattage| 130W| 100W| 65W
Input Watts| 131.2W| 126.1W| 19.6W| 100.2W| 97W| 99.2W| 65.8W| 64.2W| 65.2W
Lumens| 17,057| 18,635| 18,047| 13,753| 14,761| 14,468| 9,509| 10,042| 10,026
Efficacy| 130| 147.8| 139.3| 137.3| 152.2| 145.8| 144.5| 156.4| 153.8
CRI| 83| 86| 85| 83| 86| 85| 8/3| 86| 85
Voltage Ratings| 120-277V
WPX3 (130/100/65W)| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K| 3000K| 4000K| 5000K
---|---|---|---|---|---|---|---|---|---
Wattage| 130W| 100W| 65W
Input Watts| 130.7W| 125.6W| 129.2W| 102.8W| 99.4W| 101.7W| 69.5W| 68W| 69W
Lumens| 17,215| 18,809| 18,234| 14,082| 15,111| 14,816| 9,946| 10,415| 10,384
Efficacy| 131.7| 149.8| 141.1| 137| 152| 145.7| 143.1| 153.2| 150.5
CRI| 82| 86| 85| 83| 86| 85| 83| 86| 85
Voltage Ratings| 480V

ORDERING MATRIX

WPX

Family| Wattage| Color Temperature| Finish| Voltage| Options
---|---|---|---|---|---
WPX| | | | |
| 1| 30/20/15W| BLANK| 3000/4000/5000K CCT Adjustable| BLANK| Bronze| BLANK| 120-277V 0-10V Dimming| BLANK| Selectable On/Off Photocell
2| 80/60/40W| W| White| /480 1| 480V, 0-10V Dimming| /MVS| Microwave Occupancy Sensor
3| 130/100/65W| /LCB| Lightcloud Blue Enabled
/LCBS/MVS| Lightcloud Blue Enabled w/MVS Sensor
/LC| Lightcloud Controller
/E 2| Battery Backup
/MVS/E 2| Microwave Occupancy Sensor w/Battery Backup
/LCB/E 2| Lightcloud Blue Enabled w/ Battery Backup
/LC/E 2| Lightcloud Controller w/ Battery Backup

  1. 480V available only in WPX2 and WPX3 models
  2. Battery backup available only for WPX2 and WPX3 in 120-277V models

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals