PACIFIC MSB-11 ORB Multi Surface Floor Machine Instruction Manual

PACIFIC MSB-11 ORB Multi Surface Floor Machine

Product Specifications

• Motor: Dual Speed, 36 V/330W – DC, 3000 RPM
• Base Diameter: 11″ (27.9 cm)
• Wheel Diameter: 4″ (10.16 cm)
• Solution Tank Capacity: 3/4 Gallon (2.84 L)
• Pump Pressure: 58 PSI (4 BAR)
• Noise Level: 59 dB
• Height: 47″ (119 cm)
• Weight: 28 Lbs/12.7 Kg (+6 lbs/2.7kg w/tank & battery)
• Battery: Lithium-ion 36V/40W/6Ah (Battery Management System)
• Run Time: Up to 45 Minutes (depending on floor type/pad)
• Charge Time: 90 Minutes

Product Usage Instructions

Safety – Important Instructions
Always read and follow all safety instructions provided in the manual to prevent hazards or injuries while using the machine.

Technical Details
The machine is equipped with a dual-speed motor, a solution tank with a capacity of 3/4 gallon, and a lithium-ion battery for efficient operation. Refer to the specifications section for detailed technical information.

Operation
Follow the instructions in the manual to operate the machine effectively. This includes unpacking, setting up the solution tank, adjusting pad/brushes, using the power switch, handling the battery, and utilizing different operating options.

Maintenance
Regular maintenance is crucial for keeping the machine in good working condition. Cleaning the machine, checking its components, and ensuring proper storage are essential maintenance tasks.

Accessories and Applications
The machine supports various accessories like different types of pads and brushes for specific cleaning applications. Refer to the manual for guidance on using these accessories effectively.

FAQ

• How do I order repair parts for the machine?
  To order repair parts, contact authorized dealers with the machine model and serial number. These details can be found on the left side of the handle and in the MACHINE DATA box inside the manual.

• What should I do in case of a hazard or unsafe practice?
  If you encounter any hazardous situation or unsafe practice while using the machine, stop operation immediately and refer to the safety instructions in the manual for guidance on how to proceed safely.

HOW TO USE THIS MANUAL

• This manual contains the following sections:
  • How to Use This Manual
  • Safety
  • Operations
  • Maintenance
  • Parts List
• The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.
• Parts may be ordered from authorized dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual.
• The model and serial number of your machine is located on the left side of the handle, from the operators perspective.
• The SAFETY section contains important information regarding hazardous or unsafe practices of the machine. Levels of hazards are identified that could result in product damage, personal injury, or severe injury resulting in death.
• The OPERATIONS section is to familiarize the operator with the operation and function of the machine.
• The MAINTENANCE section contains preventive maintenance to keep the machine and its components in good working condition. They are listed in this general order:
  • Storage
  • Maintenance
  • Troubleshooting
• The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information:
  • REF – column refers to the reference number on the parts illustration.
  • PART NO. – column lists the part number for the part.
  • PRV NO. – reference number.
  • QTY – column lists the quantity of the part used in that area of the machine.
  • DESCRIPTION – column is a brief description of the part.
  • SERIAL NO. FROM – If this column has an (*) and a Reference number, see the SERIAL NUMBERS page in the back of your manual. If column has two asterisk (**), call manufacturer for serial number. The serial number indicates the first machine the part number is applicable to. The main illustration shows the most current design of the machine. When a boxed illustration is shown, it displays the older design.
  • NOTES – column for information not noted by the other columns.
• NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts.
  NOTE: The manual part number is located on the lower left corner of the front cover.

SAFETY

IMPORTANT SAFETY INSTRUCTIONS
When using this machine, basic precautions must always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

WARNING
To reduce the risk of fire, electric shock, or injury:

• Use only indoors. Do not use outdoors or expose to rain.
• Store the machine indoors where temperature is between 32° and 104°F (0° and 40°C).
• Use only as described in this manual. Use only manufacturers recommended components and attachments.
• If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center.
• Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.
• Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near flammable fluids, dust or vapors.
• This machine is suitable for commercial use such as: in hotels, schools, hospitals, factories, shops, and offices for more than normal housekeeping purposes.
• Maintenance and repairs must be done by qualified personnel.
• During operation, use caution around other persons, especially children.
• The machine shall only be operated by instructed and authorized persons.
• When leaving unattended, unplug the machine.
• Do not handle the plug or machine with wet hands.
• Do not unplug machine by pulling on cord. To unplug, grasp the plug and not the cord.
• Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the machine.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
• Do not pull/run machine over cord. Keep cord away from heated surfaces.
•  Connect to a properly grounded outlet. See Grounding Instructions.
• If the supply cord is damaged it must be replaced by an authorized service agent.
• Unplug before cleaning or servicing.
• Operational hazard may occur when running the machine over the supply cord.
• This appliance has been designed for use with pads specified by the manufacturer. The fitting of other pads may affect its safety.
• This machine is for dry use only and shall not be used or stored outdoors in wet conditions
• Moving Parts – To reduce the risk of injury, unplug before servicing.

HAZARD INTENSITY LEVEL
There are three levels of hazard intensity identified by signal words -WARNING, CAUTION, and FOR SAFETY. The level of hazard intensity is determined by the following definitions:

• WARNING
  WARNING – Hazards or unsafe practices CAN result in severe personal injury or death.

• CAUTION

  • CAUTION – Hazards or unsafe practices which could result in minor personal injury or product or property damage.

  • FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.
    Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating condition. The following is information that signals some potentially dangerous conditions to the operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the machine. Please take the necessary steps to train the machine operating personnel.

  • FOR SAFETY:
    DO NOT OPERATE MACHINE:

  • Unless trained and authorized.

  • Unless Operation Guide is read and understood.

  • In flammable or explosive areas.

  • In areas with possible falling objects.

  • WHEN SERVICING MACHINE:
    Avoid moving parts. Do not wear loose clothing, jackets, shirts, or sleeves when working on the machine. Use only manufacturer approved replacement parts.

TECHNICAL DETAILS

OPERATION

Unpacking
Open shipping box (both sides). Remove packaging material and roll machine out of the box.

Solution Tank
Disconnect the quick-connect fitting located at the bottom of the solution tank. Remove solution tank by pulling away from the handle frame. Add water or cleaning detergent of choice. Snap solution tank onto frame. Reconnect the quick-connect fitting.
CAUTION
Ensure solution tank cap is securely fastened to avoid leaks and spills.

Pads/Brushes

• Choose an Orbot pad or brush of choice to clean or restore the desired floor.
• Place under the hook pad driver BEFORE powering on machine.
• To remove, simply peel off.

Power Switch
Turn power switch to the OFF position located at the top of the handle. The power switch will illuminate when powered ON.

Battery

• Insert the battery into the battery tray located inside the base housing cover.
• Ensure to completely lock the battery into position until you hear a click sound.
• To remove the battery, release the battery lever and pull out. You can use your right hand to help push the battery out of the tray.
  WARNING
  Always remove battery and immediately charge to avoid damage.

Handle Position
Before powering ON the machine, lower the handle into a comfortable position by pulling out the pull-pin lever located on the lower left side of the handle fork.

Operating Machine

• Turn power switch on, and begin to maneuver the machine over the floor surface.
• The machine can be moved in all directions.
• When cleaning carpet, the machine is best moved forward to backwards, while spraying only forward.

Operating Option
To increase operator comfort, the wheel kit can be lowered down onto the floor by releasing the pull-pin lever and choosing the desired height.

Spray System
To apply water or detergent to the floor surface, press the spray switch located on the top right side of the handle.

System Light Indicators
(Located on Top of Motor Cover)

• Blue lights:

  • One Blue Light: Low Battery Level
  • Two Blue Lights: Medium Battery Level
  • Three Blue Lights: Full Battery Level

• Red light:
  Machine is working over full load capacity. Run times will lessen.

• Green light:
  Machine is working under light load capacity. Run times will increase.

HANDLING & STORAGE/ACCESSORIES & APPLICATIONS

Lifting & Handling
To lift the machine into a vehicle, use handle located on fork. To lift the machine up stairs, lower the wheel kit to 90 degrees.

Storage
Always keep machine stored in the upright position. Do not store brushes under pad driver when not in use.

ACCESSORIES AND APPLICATIONS

WARNING
Never store the accessories in wet conditions. Keep away from extreme heat and from chemicals.

Pad Driver

• To replace the pad driver, remove the 4 screws using a #3 Phillips/Star screwdriver. Using the incorrect screwdriver can result in stripping the screw head.
• Pad drivers should be replaced when the hook material becomes clogged with excess lint and debris.
  CAUTION
  It is important to operate the machine using clean pad drivers to ensure optimal cleaning performance. When excess clogging occurs from lint and debris, the hook tensile strength is reduced which leads to damaged pads and brushes.
  WARNING
  Never place driver onto floor surface without a pad or brush.

SuperZorb Pad

• Our exclusive SuperZorb pad is made of a special cotton and polyester blend. One of the primary components that help to extract an essential amount of soil from the carpet fibers. They also play an important role to achieve fast dry times. SuperZorb pads can be used on both sides. SuperZorb pads are machine washable. Allow to air dry.
• SuperZorb pads are also great to be used to power mop hard floors.

MicroFiber Pad
Use for cleaning all carpets and hard floors. Best used for high friction floor types. Choose over SuperZorb Pads when laundry machines are limited. Can be easily washed by hand.

UltraLift Pad

• The UL pads are used to remove stubborn stains and grease trapped in microporous hard floors such as tile, stone, VCT/vinyl, concrete, wood, epoxy, and more.
• Use with water or mild detergents.

AkwaStrip Pad
The AkwaStrip pad is a chemical free stripping pad made of a unique material filled with diamonds. Used for deep cleaning and to remove wax off of vinyl, VCT, linoleum, wood, safety tiles and more. Used on both sides. Thoroughly rinse with clean water after use.

Carpet Brush

• To lift carpet fiber piles.
• Use for extra scrubbing power to release stubborn stains.
• Also use on hard or rubber floors to release dirt from small cracks, crevices, and pores.
  CAUTION
  Do not store brushes under the machine. As a result, bristles will become damaged and deformed.

Tile & Grout Brush
Use for cleaning hard floor tiles, grout lines, pores, cracks, and crevices.
CAUTION
Do not store brushes under the machine. As a result, bristles will become damaged and deformed.

MAINTENANCE

COMMON MAINTENANCE

Cleaning the Machine

• Always maintain a clean machine to preserve it’s presence and optimal performance.
• Maintain clog free hook pad drivers to maximize cleaning performance and eliminate damage to pads and brushes.

Checking the Machine

• Check counter weight bearing to ensure optimal performance and minimal vibration.
• Check for any loose nuts and bolts to minimize vibration.
• Check pull lever pins for any loose fasteners.
• Check solution tank filters to ensure maximum solution flow.

Cleans in Small Spaces

• Ease of cleaning in tight and narrow spaces such as under chairs.
• Ease of cleaning within hard to reach spots in bathrooms.
• Ease of carrying up stairs as well as cleaning them.
• Also, planes, trains, automobiles, etc. are very hard to clean where the SLiM comes in handy to assist in these areas. Plus many more possible opportunities where most cleaning machines are too large to get to those small spaces.

PARTS

SOLUTION TANK ASSEMBLY

HANDLE / FRAME ASSEMBLY

WHEEL KIT / PUMP ASSEMBLY

SPRAY NOZZLE & MOTOR COVER ASSEMBLY

1
12 / 13| 570273 / 570274| LED, CIRCUIT BOARD / MOTOR COVER, WASHER, BLK| 1 / 1
14 / 15| 570275 / 570276| SPRAYER WASHER, ZINC / 1/4” BLACK TUBE for 90° FITTING| 1 / 1
16| 570277| LABEL, LOW MOISTURE| 1

BATTERY ASSEMBLY

BASE & DRIVER PLATE ASSEMBLY

COMPLETE ASSEMBLY

WIRING DIAGRAM

ORBOT SLiM

ABOUT COMPANY

• 2259 Sheridan Drive, Muskegon, MI 49442, USA
• P: 800-968-1332
• orders@PacificFloorcare.com
• www.PacificFloorcare.com

References

• Home - Pacific Floorcare

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>