Skullcandy 42 True Wireless Rail In Earbuds User Guide
- May 15, 2024
- Skullcandy
Table of Contents
- Skullcandy 42 True Wireless Rail In Earbuds
- Download the Skull-iQ® App
- Auto Power – On/Off
- FCC Compliance Statement
- Pairing Mode
- Pair New Device
- Play/Pause Answer Call
- Track Forward
- Re-Sync Earbuds
- Charge Earbuds
- Charge the Case
- Reset Paired Device List
- Voice Control
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Skullcandy 42 True Wireless Rail In Earbuds
Download the Skull-iQ® App
Scan to get started.
Warranty information at:
Auto Power – On/Off
- Auto On – Remove buds from Case
- Auto Off – Place buds into Case
Power – On
- Off Mode
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Compliance Statement
This device contains license-exempt transmitters)/receiver(s) that comply with
Contains a Li-ion battery. The battery must be recycled or disposed of properly.
Power – Off
- On Mode Both earbuds
Pairing Mode
- On Mode Either bud
Pair New Device
- Voice Prompt – “Ready to Pair”
- Available Device – “Rail ANC”
Play/Pause Answer Call
- While On Either bud
Track Forward
Either Earbud
ANC / Stay-Aware Mode On/Off
Either Earbud
Re-Sync Earbuds
Both Earbuds
- While On
- Bluetooth Disconnected
Charge Earbuds
Earbud LED’s turn RED to indicate charging.
Charge the Case
- LED Pulsing RED – 0%-25% case charge
- LED Pulsing Yellow – 25%-75% case charge
- LED Solid GREEN – 76%-100% case charge
Reset Paired Device List
Both earbuds
- While ON
- Bluetooth Disconnected
Voice Control
- Skull-iQ™ App Required
Questions Visit:
Maximum operating temperature 45°C.
- Speaker Driver: 12mm,
- Impedance: 32 Ohms, THD <3%@50Hz-10KHz,
- Voltage Regulation: 3.7v, Bluetooth® 5.2,
- Frequency Band: 2.402GHz – 2.480GHz,
- Maximum Power: 12.95dBm.
- Weight: 49.80.
Skullcandy, & and other marks are registered trademarks of Skullcandy, Inc. All rights reserved.
“Android” is a trademark of Google inc. “Apple” is a trademark of Apple inc. «Android» est une marque de commerce de Google inc. «Apple» est une marque commerciale d’Apple inc. “Android” es una marca comercial de Google inc. “Apple” es una marca comercial de Apple inc. Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple products) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance. iPhone and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.
1 YEAR GLOBAL WARRANTY
Skullcandy products are backed by a 1-year warranty. If it doesn’t work the way we promised, we’ll make it right. For claims, questions, or Terms & Conditions: U.S. & Canada only: visit Skullcandy.com/warranty or call 1-888-MYSKULL All other countries: visit Skullcandy.com/support /international-support Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfill where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed-out wheeled bin symbol) in your bin. Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfills where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations, the battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities or return to the purchase location for recycling or disposal.
SIMPLIFIED EU
DECLARATION OF CONFORMITY Hereby, Skullcandy Internation GmbH declares that the radio equipment type [Model: S2/PW] is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address: Skullcandy.eu/product- documents
CAUTION
Risk of explosion if the battery is replaced by an incorrect type disposal of a battery into fire or a hot oven, or mechanical crushina or cutting of a batter that can result in an explosion leavina a batter in an extremel hion temperature surrounding crushing or cutting of a battery, that can result in an explosion;leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>