BELMAX T11 Wireless Charger Bluetooth Music Lamp User Manual

BELMAX T11 Wireless Charger Bluetooth Music Lamp

5 IN 1 TOUCH LAMP

• BLUETOOTH SPEAKER

• INTERCONNECT TWS

• WIRELESS CHARGER

• ATMOSPHERE LAMP

• PHONE STAND

FEATURES AND BENEFITS

WIRELESS SPEAKER FUNCTION

When in the POWER OFF mode, press the power switch (7). Once the greeting audio is heard, the speaker is ready to use. If connecting for the first time, please refer to the “Bluetooth Function” section for further instructions. After successful pairing, you can play your music via a Bluetooth connection.

A long press of the Volume Up button (3) will skip to the next track. A long press of the Volume Down button (1) will go to the previous track.
When the “+” button has been pressed numerous times, a volume limiter feature will sound to indicate that the maximum volume has been reached.

BLUETOOTH FUNCTION

1. n the OFF mode, press the POWER ON button (please see section) on back of speaker. After the greeting tune is heard, the speaker will turn on the Bluetooth pairing mode.
2. On your smartphone device, go to Settings and select Bluetooth. Then select device name “T11 Belmak”.
3. Once the devices are paired and connected there will be an audible “beep” indicating a successful pairing.
4. In the OFF mode, press the POWER ON button (please see section) on back of speaker. After the greeting tune is heard, the speaker will turn on the Bluetooth pairing mode.
5. On your smartphone device, go to Settings and select Bluetooth. Then select device name “T11 Belmak”.
6. Once the devices are paired and connected there will be an audible “beep” indicating a successful pairing.
   

CHARGING OPERATION

1. Connect USB to the 9V/2A power adapter, connect the other end to the Type-C interface.
2. After connecting the wireless charger to power, turn it ON (7).
3. Place your smartphone device directly onto the wireless charging lamp. The charger will detect the smartphone’s presence and automatically begin charging.
4. Wait for your smartphone device to fully charge.
5. Once your smartphone device is fully charged, remove it from the wireless charger.

Note: It’s important to ensure that your smartphone is compatible with the wireless charger and that it supports wireless charging. Some smartphones may require additional accessories, such as a wireless charging case, to enable wireless charging.

his product supports wireless charging function and detects short-range wireless energy transmission by magnetic induction with overcharge protection, overvoltage protection (6.5V), and overcurrent protection (2A).

LIGHT OPERATION

There are 3 levels of brightness. Level 1 starts at 30% brightness. Level 2 reaches a 70 % brightness and Level 3 reaches 100% respectively. A long press of the handle will turn the lights OFF.

TWS FUNCTION

1. urn the power switch ON, in both speakers to enter TWS pair mode.

2. Once the connection is successful, a blue light of the main unit will flash rapidly. The blue light of the slave unit stays illuminated while in use.
   The main unit needs to be paired with a mobile phone (Please see Bluetooth Function section).

3. After successful pairing, the left and right stereo channels will function.

4. To exit the TWS mode, turn the POWER switch to the OFF position, on the slave speaker.
   

Note: The device’s main speaker may still be used while the slave speaker remains in OFF mode.

AUX INTERFACE

1. Locate the headphone jack or audio port on your smartphone device.
2. Insert one end of the aux cable into the audio port of the device and insert the other end into the audio input found on the side of speaker.
   
   

SPECIFICATION

Samsung GalaxyS7 and Up; Huawei Mate RS and UP; Xiaomi MIX2S, MIX3 and Up;
Bluetooth Version| 5.3
Bluetooth Distance| 33 feet (10 Meters)
Speaker Power| 4 5W
Speaker Diameter| 66mm

PRODUCT ACCESSORY

PRECAUTIONS

• DO NOT Expose to Liquids!
  

• DO NOT Disassemble!
  
  

• Avoid Dropping!
  

• Avoid Extreme Temperatures!
  

• DO NOT Charge the phone with a Metal Protective Case!
  

• DO NOT Use Non-certified Adapters!
  

• DO NOT Charge Near the Magnet card!
  

FCC statement

This equipment has been tested and complies with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. Therefore, if the equipment is not installed and used by the instruction, it may cause harmful interference to radio
communications.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could make you fail to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions below:
This device complies with part 15 of the FCC Rules. Operation is subject to the below two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

Customer Support

OUR CUSTOMER SUPPORT:
support@belmakinc.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>