NATHAN LightBender RX Lighted Armband User Manual
- June 12, 2024
- NATHAN
Table of Contents
NATHAN LightBender RX Lighted Armband
Product Information
The LightBenderTM RX is a rechargeable device designed for lighting purposes. It features a covered charge port on the back of the unit and has LED indicators to indicate the charging status. The device requires a USB power source with a minimum output of 200mA to recharge. The charging time for a fully depleted battery is approximately 3 hours.
Product Usage Instructions
- Plug the supplied USB cord into a USB power source with a minimum output of 200mA.
- Gently plug the other end of the USB cord into the covered charge port on the back of the LightBenderTM RX.
- A red LED will light up to indicate that the device is being charged.
- Wait for approximately 3 hours until the device is fully charged. A green light will indicate that the charging process is complete.
- Once fully charged, unplug the LightBenderTM RX from the USB power supply.
- Return the port cover gasket to its original position to protect the charge port.
- Store the charger cord in a safe place until the next use.
USAGE INSTRUCTIONS
- Press and hold the power button for 2 – 3 seconds to turn on.
- Once on, double-click the button at any time to cycle through color options.
- Single-click the button at any time to cycle through lighting modes.
- Press and hold the power button for 2 – 3 seconds to turn it off.
TO RECHARGE
- Plug supplied USB cord into a USB power source (200mA minimum) and then plug gently into the covered charge port on the back of the unit. A red LED will light up to indicate charging is occurring and a green light indicates the LightBender™ RX is fully charged.
- Charge time is 3 hours for a fully depleted battery.
- When fully charged, unplug LightBender™ RX from the USB power supply, return the port cover gasket to its original position and store the charger cord until next use.
Read User Manual Online (PDF format)
Loading......