RAB T34 Smartshift 1×4 with Lightcloud Blue Instructions
- October 30, 2023
- RAB
Table of Contents
RAB T34 Smartshift 1×4 with Lightcloud Blue
Product Information
The product is a downlight fixture with model numbers T34LCB1X4/PIR /MVS /E, T34LCB2X2 /PIR /MVS /E, and T34LCB2X4 /PIR /MVS /E. The fixture comes with Grid Clips, Tee-Grid Bar, Support Wires, Access Plate, Conduit Knockouts, and Splice Box. The Lightcloud Blue app can be downloaded from the Apple App Store or Google Play store to control the device. The product is equipped with Rapid Provisioning technology that allows for quick and easy commissioning of devices for residential and large commercial applications without the need for a Gateway or Hub.
Product Usage Instructions
- Download the Lightcloud Blue app from the Apple App Store or Google Play store.
- Create an account in the app.
- Tap the add device icon in the app to start connecting devices.
- Follow the remaining steps in the app to create areas, groups, and scenes to organize and control your devices.
- If the Lightcloud Blue Fixture is already paired, it can be reset to factory settings using the Delete function in the app or by using the Rapid Reset Tool provided by a professional electrician qualified by RAB.
- The fixture can be cleaned by first ensuring it is cool enough to touch, then cleaning the glass lens with non-abrasive glass cleaning solution. Do not touch the LED while cleaning.
- If troubleshooting is necessary, ensure the fixture is powered, wired correctly, and grounded properly. Contact Lightcloud Blue Support at 1.844.LIGHTCLOUD for further assistance.
IMPORTANT:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE. RAB fixtures must be wired in accordance with the National
Electrical Code and all applicable local codes. Proper grounding is required
for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF
THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING : Make certain power is OFF before installing or maintaining
fixture. No user serviceable parts inside.
SAFETY INSTRUCTIONS
- Risk of fire or electric shock. Suitable for damp locations.
- Suitable for 9/16″ or 15/16″ FlatTee-Grid in both insulated ceilings and non-insulated ceilings. Access above ceiling required.
- Do not handle energized fixture when hands are wet, when standing on wet or damp surfaces, or in water.
- Vapor barrier must be suitable for 90° C.
- Fixture to be independently supported to building structure.
CONTROLLING LIGHTCLOUD® BLUE DEVICE
- Confirm your device is powered on.
- Download the Lightcloud Blue app from the Apple App Store or Google Play store.
- Launch the App and create an account.
- Tap the “add device” icon in the app to start connecting devices.
- Follow the remaining steps in the app. Create areas, groups, and scenes to organize and control your devices.
- You’re all set!
For additional information about the Lightcloud Blue mobile app visit change web link to: www.lightcloud.com/item/lcb-getting- started/
LIGHTCLOUD ® BLUE
Lightcloud Blue is a Bluetooth mesh wireless lighting control system that allows you to control various compatible devices. With RAB’s patent-pending Rapid Provisioning technology, devices can be quickly and easily commissioned for residential and large commercial applications using the Lightcloud Blue mobile app. Each device in a system can communicate with any other device, eliminating the need for a Gateway or Hub and maximizing the control system’s reach.
Lightcloud Blue fixtures should be placed within 60′ of another Lightcloud Blue device through standard building materials or upto 200′ clear line of sight.
Setting Device to Pairing Mode
If your Lightcloud Blue Fixture is already paired, you can reset it to factory settings by using the below methods.
Method 1: Delete from App
Open the app and access the device settings for the paired device. Be sure
that the downlight is online and select “Delete”.
Method 2: Manual
Power the down light off and on 5 times consecutively. Do not allow less than 5 seconds and more than 10 seconds to elapse from switch off to on, do not allow more than 2 seconds to elapse from switch on to off. The down light will flash 3 times, then reset to 100% brightness at default CCT.
Method 3: Rapid Reset Tool
The rapid reset process must be done by professional electricians qualified by RAB. Reach out to your RAB sales manager to request a Rapid Reset Tool. The tool simply needs to be placed directly on the small Lightcloud logo on fixture for 2 seconds. The downlight will flash 3 times, then reset to 100% brightness at default CCT.
CLEANING
CAUTION : Be sure fixture temperature is cool enough to touch. Do not clean or maintain while fixture is energized.
- Clean glass lens with non-abrasive glass cleaning solution.
- Do not open the fixture to clean the LED. Do not touch the LED.
TROUBLESHOOTING
- Check that the fixture is powered.
- Check that the line voltage at fixture is correct. Refer to wiring directions.
- Be sure fixture is grounded properly.
- Call Lightcloud Blue Support at 1.844.LIGHTCLOUD.
CONFIGURATION
For additional information about the Lightcloud Blue mobile app visit
www.lightcloud.com.
BATTERY BACKUP MODELS
WIRING
Note : Make sure that the necessary branch circuit wiring is available.
An UNSWITCHED AC source of power is required. The emergency driver must be fed
from the same branch circuit as the LED driver.
CAUTION : Do not use any supply voltage other than 120-277V 50/60 HZ.
Battery test button is provided with adhesive backing. Align the Test Button to edge of Fixture Frame closest to the lens for easy accessibility as shown in Fig. 8 & 9.
- Connect UNSWITCHED HOT fixture lead to HOT ACsupply line.
- If using an UNSWITCHED circuit, connect UNSWITCHED and SWITCHED lines together.
- If using a SWITCHED circuit, connect SWITCHED HOT lead to the external. supply line. and AC fixture
- For 0-1 0V dimming, connect DIM (+) purple and DIM (-) pink leads to 0-1 0V dimming connection. Do not connect to the output leads.
- All unused leads must be capped and insulated.
- After installation is complete, supply AC power to the fixture and connect the BATTERY.
- When power is on, the fixture should be on and the Charging Indicator Light should illuminate to indicate the battery is charging.
- Once the BATTERY has charged for at least one hour, a short duration test may be performed by pressing the
- After the battery has charged for 24 hours, a long duration test can be performed by shutting power to the fixture.
Note: These instructions do not cover all details or variations in
equipment nor do they provide for every possible situation during
installation, operation or maintenance.
OPERATION
- When AC power is applied, the charging indicator light is illuminated, indicating that the BATTERY is being charged.
- When power fails the standby power automatically switches to emergency power (INTERNAL BATTERY) operating at reduced illumination. The emergency driver will operate in standby power for a minimum of 90 minutes.
- When AC power is restored, the emergency driver automatically returns to charging mode.
MAINTENANCE
Although no routine maintenance is required to keep the emergency driver functional, it should be checked periodically to ensure that it is working. The following schedule is recommended:
- Visually inspect the charging indicator light monthly. It should be illuminated.
- Test the emergency operation of the fixture at 30-day intervals for a minimum of 30 seconds.
- Conduct a 90-minute discharge test once a year. Fixture would operate at reduced illumination for a minimum of 90 minutes.
TROUBLESHOOTING
- Is the fixture grounded properly?
- If the charging indicator light does not illuminate after pressing the Test Button check if the battery is connected properly.
rablighting.com
Visit our website for product info.
Tech Help Line
Call our experts: 888 722-1000
e-mail
Answered promptly – sales@rablighting.com
Free Lighting Layouts
Answered online or by request
RAB WARRANTY : RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty
References
- Welcome to RAB
- Legal - RAB Lighting
- Lightcloud by RAB - The World's most powerful lighting control system.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>