RAB LIGHTING WFR6B RGBW Edge Lit Wafer Instruction Manual
- May 15, 2024
- RAB Lighting
Table of Contents
- RAB LIGHTING WFR6B RGBW Edge Lit Wafer
- Product Information
- Product Usage Instructions
- Product Features
- Safety Information
- What’s in the box
- Optional accessories
- Installing your Lightcloud Blue Device
- Controlling your Lightcloud Blue Device
- Reset to Default Settings
- Functionality
- Lightcloud
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RAB LIGHTING WFR6B RGBW Edge Lit Wafer
Product Information
Specifications:
- Catalog Number: WFR6B/RGB
- Model Number: WFR6B/RGB
- Electrical: 13W, 850lm, 120Vac, 60Hz
- Construction: Direct Wire Installation
- Size: 6 Trim
- Finish: White Trim
- Style: Baffle
Product Features:
- Direct Connect LED, no Gateway or Hub required
- Wireless control from your mobile device
- On/off and dimming functionality
- Tunable RGB lighting from 2700K to 6500K
- Group devices together
- Create custom scenes
- Sensor compatible
- Schedules and automations
- SmartShift automated circadian schedule
Safety Information:
Contact 1 (844) LIGHTCLOUD or email
support@lightcloud.com for assistance.
What’s in the Box:
- Fixture (1)
- Driver box (1)
- Template (1)
Tools Needed for Installation:
This Lightcloud Blue Edge-Lit Wafer requires a screwdriver and a pair of
wire-cutters for installation.
Optional Accessories:
- DLPLATE/WFR3456 – Mounting plate with nailer bar
- DLPLATE/WFR3468/NB – Mounting plate with nailer bar
- EXTCBL-FA-6 – Wafer extension cable 6ft
- EXTCBL-FA-12 – Wafer extension cable 12ft
- EXTCBL-FA-20 – Wafer extension cable 20ft
Product Usage Instructions
Installing Your Lightcloud Blue Device:
- Turn off the power at the circuit breaker panel or remove the fuse from the fuse box.
- Find a suitable location to install the device.
- Add an additional Lightcloud Blue Device to extend network range around corners if needed.
Frequently Asked Questions (FAQ):
-
Q: Do I need a Gateway or Hub to use the Lightcloud Blue system?
A: No, the Lightcloud Blue system does not require a Gateway or Hub for operation. -
Q: What is the color temperature range of the tunable RGB lighting?
A: The tunable RGB lighting feature offers a color temperature range from 2700K to 6500K. -
Q: Can I control multiple devices together and create custom scenes?
A: Yes, you can group devices together and create custom scenes using the Lightcloud Blue mobile app.
Hello
Lightcloud Blue is a Bluetooth mesh wireless lighting control system that
allows you to control RAB’s various compatible devices. With RAB’s patent-
pending Rapid Provisioning technology, devices can be quickly and easily
commissioned for residential and large commercial applications using the
Lightcloud Blue mobile app. Each device in a system can communicate with any
other device, eliminating the need for a Gateway or Hub and maximizing the
control system’s reach.
Product Features
- Direct Connect LED, No Gateway or Hub required
- Wireless control from your mobile device
- On/off and dimming
- Tunable RGB, 2700K – 6500K
- Group devices together
- Create custom scenes
- Sensor compatible
- Schedules and automations
- SmartShift™ automated circadian schedule
Catalog Number:
WFR6B/RGB
Model Number:
WFR6B/RGB
Electrical:
13W, 850lm
120Vac, 60Hz
Construction :
Installation: Direct Wire
Size: 6”
Trim Finish: White
Trim Style: Baffle
Safety Information
- Not suitable for use with dimmers and sensors unless specifically designed for RAB Lightcloud Blue downlights.
- Risk of electrical shock. Disconnect power at fuse or circuit breaker before installing or servicing.
- No user serviceable parts inside. To avoid electrical shock do not disassemble product.
- This device is not intended for use with emergency exits.
- Type IC. INHERENTLY PROTECTED
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
Risk of fire or electric shock
- Installation requires knowledge of luminaires electrical systems.
If not qualified, do not attempt installation. Contact a qualified electrician.
What’s in the box
Tools needed
This Lightcloud Blue Edge-Lit Wafer requires very few tools for installation.
A screwdriver and a pair of wire-cutters will help to install.
Optional accessories
Installing your Lightcloud Blue Device
Turn off power
- Place the wall switch in the off position.
- Turn off the main power at the breaker panel or remove the fuse from the fuse box.
Find a suitable location
- Lightcloud Blue devices should be positioned within 60 ft. of each other.
- Building materials such as brick, concrete and steel construction may require additional Lightcloud Blue devices to extend around an obstruction.
Install the Lightcloud Blue Edge-Lit Wafer
-
Turn power OFF from the electrical panel before installation.
-
Use template inside box to cut hole in ceiling. (Fig.1)
-
Open the driver box and remove the knockout(s). (Fig.2)
-
Insert the electrical supply cable through the knockout and secure with attached terminal. Wire driver box (Fig.3), white – white, black – black, green – green/ground. -
Place all wiring and connections back into the box, close the cover. (Fig.4)
-
Place the driver box into the ceiling and connect the fixture to driver box. (Fig.5)
-
Lifting both retention tabs upward. Push until the trim sits flush against the ceiling. (Fig.6)
Controlling your Lightcloud Blue Device
- Confirm your device is powered on.
- Download the Lightcloud Blue app from the Apple® App Store or Google® Play store.
- Launch the App and create an account.
- Tap the “add device” icon in the app to start connecting devices.
- Follow the remaining steps in the app. Create areas, groups, and scenes to organize and control your devices.
- You’re all set!
Reset to Default Settings
If your Lightcloud Blue Edge-Lit Wafer is already paired, you can reset it by using the below methods.
-
Method 1: Delete from App
Open the app and access the device settings for the paired device.
Be sure that the downlight is online and select “Delete”. -
Method 2 : Manual Power the downlight off and on 5 times consecutively. Do not allow less than 4 seconds to elapse from switch off to on, do not allow more than 2 seconds to elapse from switch on to off. The downlight will flash 3 times, then reset to 100% brightness at default CCT.
-
Method 3 : Rapid Reset Tool The rapid reset process must be done by professional electricians qualified by RAB. Reach out to your RAB sales manager to request a Rapid Reset Tool. The tool simply needs to be placed directly on the small Lightcloud logo on downlight for 2 seconds. The downlight will flash 3 times, then reset to 100% brightness at default CCT.
Functionality
Configuration
All configuration of Lightcloud Blue products may be performed using the
Lightcloud Blue app.
Emergency default
If communication is lost, the Lightcloud Blue Edge-Lit Wafer will revert back
to the last known ‘On’ status. This setting can be adjusted using the
Lightcloud Blue mobile app. Warning: Any wires not in use must be capped
off or otherwise insulated.)
WE’RE HERE TO HELP:
1 (844) LIGHTCLOUD 1 844-544-4825
support@lightcloud.com
FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may no cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note : This device has been tested and found to comply with the limits
for Class B digital devices pursuant to Part 15 Subpart B the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential environment. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To comply with the FCC’s RF exposure limits for general population /
uncontrolled exposure, this transmitter must be installed provide a separation
distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with an other antenna or transmitter.
to operate this equipment.
Lightcloud
Lightcloud Blue is a Bluetooth mesh wireless lighting control system that
allows you to control RAB’s various compatible devices. With RAB’s patent-
pending Rapid Provisioning technology, devices can be quickly and easily
commissioned for residential and large commercial applications using the
Lightcloud Blue mobile app. Each device in a system can communicate with any
other device, eliminating the need for a Gateway or Hub and maximizing the
control system’s reach.
Learn more at www.rablighting.com
1(844) LIGHTCLOUD
1(844) 544-4825
©2023 RAB LIGHTING Inc. Made in Cambodia
Pat. rablighting.com/ip
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>