ET2 E11030 Diaphane LED Sconce Instruction Manual
- June 27, 2024
- ET2
Table of Contents
ET2 E11030 Diaphane LED Sconce Instruction Manual
Specifications
- Item / Model Number: E11030 Diaphane LED Sconce
- LED Integrated 1 x 5W (Included)
- Input Voltage: 120-277VAC
- Input Current: 0.1Amax@120VAC
- Output Voltage: 24V
- Output Current: 330mAmax
- Power Factor (PF): >0.9
- Dimmer Type: 0-10v/Triac
- Output Type: Constant Voltage (CV)
Product Usage Instructions
Installation
- Identify the positive (L), neutral (N), and ground wires in your electrical junction box.
- Connect the black wire (-) from the fixture to the positive (L) wire, and the red wire (+) to the neutral (N) wire.
- Securely connect the ground wire (green wire) to the ground enclosure in your installation.
- If using a dimmer switch, ensure compatibility with the product’s dimming specifications.
Usage
To turn on the E11030 Diaphane LED Sconce, simply flip the wall switch connected to the fixture. Use a compatible dimmer switch to adjust the brightness level as desired.
Maintenance
Regularly clean the fixture with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials that may damage the finish.
Before Getting Started
- Read the instructions carefully before assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain them for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all the required contents for complete assembly.
- Take care when lifting. Assemble the product near where you intend to install it.
- Do not over-tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product. Risk of suffocation
- Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock!
Disconnect from the power source before assembling or cleaning.
Switch off, unplug, and allow the bulb to cool before replacing the bulb or
cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire Check the product cord to be sure is free of torn or frayed.
WARNING: Wires must be connected to a low-voltage driver and should not
be connected directly to live wire or a short may occur.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, stone polish, & wood polish.
Clean with a soft cloth and a mild detergent. Do not use abrasive or harsh
cleaners.
Periodically (every 90-180 days) make sure that the screws are fully
tightened.
Prolonged exposure to heat sources may cause glazing, melting, and scorching,
or even cause color to fade.
PARTS
Before getting, started, ensure the package contains the following components:
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.
VERIFIED LIST OF TESTED DIMMERS
Lutron Diva DVCL-153P
Lutron Diva DVELV-300P
Lutron Skylark CTCL-153P
DEAKO Smart Dimmer
DEAKO Simple Dimmer
LEVITON 6672-L
LEVITON 6674
LEVITON DSL06
Due to inrush current, wattage should not Work at 120-277 VAC except 150W on a
600W dimmer
GENERAL COMPATIBILITY
- TRIAC / FORWARD PHASE ELV /REVERSE PHASE Only at 120 VAC
- 0-10V / LOW VOLTAGE Work at 120-277 VAC
IMPORTANT
If the control is not paired properly with LED fixtures, irreparable damage may occur. If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: www.et2online.com
FAQ
Q: Can this LED sconce be used in damp locations?
A: Yes, the E11030 Diaphane LED Sconce is suitable for use in both dry and damp locations.
Q: What type of dimmer switch is recommended for this product?
A: Compatible dimmer switches include Lutron Diva DVCL-153P, Lutron Diva DVELV-300P, Lutron SkylarK CTCL-153P, DEAKO Smart Dimmer, DEAKO Simple Dimmer, LEVITON 6672-L, LEVITON 6674, and LEVITON DSL06.