KSIX BXSW16N Core Smart Watch User Manual

KSIX BXSW16N Core Smart Watch

Specifications

• Model: Core Smartwatch
• Charging Cable Length: 60 cm
• Battery Life: Up to 5 days
• Charging Time: Approximately 2 hours
• IP Rating: IP68

Attaching and Removing Straps:
To remove a strap:

1. Hold the strap.
2. Carefully slide the metal piece out of its hole.

To attach a strap:

1. Hold the strap and insert the metal piece on one end.
2. Slide the metal piece on the other end and insert the end of the strap into the case hole.

Charging:
The Core Smartwatch can be charged using the provided 60 cmUSB-A cable with a magnetic charging port. Follow these steps:

1. Connect the USB-A connector to a charger, computer output, or  power bank.
2. Place the magnetic port on the back of the watch so that it aligns with the two golden pins.
3. The full charge time is approximately 2 hours, and the battery can last up to 5 days.

Power On/Off:
To turn on the smartwatch, press the button for 3 seconds. Toturn it off, press the button for 2 seconds. Follow the on-screen prompts to select power off, factory reset, or reboot.

CORE SMARTWATCH
User manual

Characteristics

Technical specifications

• Display: 1.43” AMOLED Multitouch 466 x 466
• Battery: Lithium polymer 260 mAh
• Voltage frequency: 5V/2A 50-60 Hz
• Compatibility: Android 4.4 / iOS 9.0 and later versions
• App: CO-FIT
• Housing material: ABS
• Display material: Toughened glass
• Strap material: Silicone strap and stainless-steel buckle
• Protection rating: IP67 (submersible 1 meter for 30 minutes)
• Watch dimensions: 46 x 46 x 11 mm
• Strap length: 22 cm
• Wrist closure diameter: 14 to 19 cm
• Weight: 21,5 g
• Autonomy: 5 days in normal use, 2 days in intensive use
• Charging time: 2 hours

Built-in microphone and speaker

• Health functions: Sport monitor, pedometer, heart rate meter, blood pressure meter, blood oxygen saturation meter, stress meter, sleep monitor, menstrual cycle
• Functions: Make and receive calls, notifications, voice assistants, music control, remote camera control, anti-lost function
• Other functions: Alarm, calculator, calendar, stopwatch, timer, stock market information, weather, breathing exercises, sedentary reminder, etc.
• Languages: English, Spanish, French, German, Italian, Portuguese, Russian, Dutch, Chinese, Japanese, Korean, Arabic, Greek, Finnish, Croatian, Turkish, Romanian, Danish, Ukrainian, Urdu, Hebrew, etc.
• Frequency range: 2402-2480 GHz

In the box

• 1 x Smartwatch
• 1 x USB-A cable with magnetic charging port (60 cm)
• 1 x Manual

Diagram

1.  Screen
2. Button
3. Microphone
4. Speaker
5. Magnetic charging pins

How to attach and remove the straps
Although only one strap is included in the box, it can be attached and removed easily. The shorter strap must be placed in the display’s top slot, while the longer strap must be placed in the display’s bottom slot. Otherwise, the insertion system may be irreparably damaged.

1. To remove a strap: Hold the strap and carefully slide the metal piece out of its hole.
2. To attach a strap: Hold the strap and insert the metal piece on one end. Then, slide the metal piece on the other end and insert the end of the strap so that when you let go of the metal piece it fits into the case hole.

Charging

The Core smartwatch’s full charge time is approximately 2 hours, and the battery can last up to 5 days depending on the usage.
Use the 60 cm USB-A cable with magnetic charging port that is included in the box to charge the smartwatch. Connect the USB-A connector to a charger, computer output or powerbank and place the magnetic port in a way so that it sticks to the 2 golden pins featured on the back part of the body watch.

Power on/off
To turn on the smartwatch press the button for 3 seconds.
To turn off the smartwatch, press the button for 2 seconds; 3 options will pop up: power off, factory reset and reboot. Tap on power off or any other desired option.
You can also turn it off from the power off icon on the main menu.

About IP protection rating
The Urban 4 smartwatch has an IP68 protection rating. This means that it can withstand being submersed under water 1,5 meters for up to 30 minutes. Make sure to use the auto-drain function after submerging it; you will find it in the options menu depicted as a water drop icon.
Note: In case of swimming in the sea or in a saltwater pool, it is recommended to rinse the watch with fresh water after immersion due to the corrosive effect of salt water.

Initial setup

Download the app
The Core smartwatch compatible app is called Co-Fit. There are several ways to download it: – Tap here to download the Co-Fit app from Google Play or App Store.

• You can also download the app directly by typing “Co-Fit” in the Google Play or App Store search engine.
• Another way to download the app is from a QR code. This QR code will appear when you power on the smartwatch. You can also get the QR code by swiping the home screen downward and tapping on the QR icon.

Register in the app
Registering in the app is very simple.

1. When you access the app accept the permissions and choose your region. Then, you will see the following:
   We recommend you access the app with the Google option. Once you do so, choose your Gmail or Hotmail address and you will instantly log in. Once inside you will see this screen:
   

2.  Enter your email and tap on the send verification code option. When you do so, you will access this screen:

3. 4. Enter the verification code that you will receive in your mail inbox. Once you do so, you are ready to go. Make sure to accept all the permissions that the app requests to ensure optimal performance and function usage.

Pairing iOS / Android devices

1. Enable your smartphone’s Bluetooth.
2. Log in to the Co-Fit app and access the profile section (third option at the bottom of your screen).
3. Tap on the device option. Once you do so, you will see the devices that are ready to be bound. Tap on the device named CORE.
4. Once you tap on the device named KSIX CORE the binding process will start. When you do so, hold the watch close to your smartphone.
5. As previously mentioned, make sure to accept all the permissions that the app requests. Also make sure that it correctly binds. If it does not, access your Bluetooth phone settings and select KSIX CORE.

Troubleshooting

• If the app cannot find the device, power off the smartwatch and then on again.
• If the device connects and disconnects quickly there may be an obstruction between the device and the phone. Wearing metal jewelry may interfere with the stability of the connection.
• If the device does not charge, it may be due to a dirty or rusted charging port.

Usage and functions

It is very important to always accept all the permissions requested by the app so that the smartwatch functions optimally. Also activate all the desired features from the device option within the profile section in the Co-Fit app.

How to browse through the smartwatch
The usage method of the Core smartwatch is very simple and intuitive:

• Via screen swipe
  • Swipe your finger to the right or to the left from the main screen to enter the quick access menu. To choose the features that you want to display, swipe left or right from the home screen and tap on the “+” icon. Once inside, you will see options such as heart rate, music control, sleep monitor, weather, among many more. Tap on the green “+” icon next to each function to add them to the quick access menu. When you swipe right again from the main screen, you will see that the options that you have selected will show. The left and right quick access menu are not independent, this means that whether you swipe right or left, you will have the same functions displayed but in the opposite order.
  • Swipe your finger downward from the main screen to access the options menu. In here you will find different functions, such as the do not disturb mode, settings, alarm, the display brightness, among others. To access any of these options, tap on the corresponding icon.
  • Swipe your finger upward from the main screen to view app notifications, missed calls, text messages and other notifications.
• Via button
  Press the smartwatch button to access the main menu. Here you will be able to access all the smartwatch’s features by tapping on the corresponding icon.

Changing the watch face
There are 2 options when it comes to changing the Core’s watch face:

• The first option is from within the smartwatch. On the home screen, just tap on the display for 2 seconds and you will see multiple dial displays. Tap on the one that you like the most to make it your home screen dial.
• The second option is from within the Co-Fit app. From within the device section, tap on theme. A wide variety of themes will be displayed; download the one that you like the most and it will be added to the dial display list within your smartwatch. From within the same app section, you will also be able to access a watch face customization tool. Here, you will be able to choose the watch wallpaper, a digital or analogical dial and add sport/health data. You will also be able to use a picture of your smartphone gallery as wallpaper.

Calls
The Core smartwatch allows you to make, receive, answer and reject calls. You can maintain a phone call conversation with just the smartwatch thanks to its built-in microphone and speaker.

• Receiving, answering and rejecting calls

  • It is very important to have the incoming calls feature enabled to receive incoming calls. Calls will appear in real time on the screen and the watch will vibrate.
  • Calls can be accepted by pressing the green icon and rejected by pressing the red icon.
  • If the call is accepted, it can be ended by pressing the red icon. To reject the call, tap on the red icon before answering it. A lost call notification will appear on the smartwatch’s display.
  • In case the incoming call function is not activated, the smartwatch will only display incoming call notifications, but will not emit real-time signals or vibrate.

• Making calls
  There are three options when it comes to making calls:

  • Call a contact: Choose up to 20 contacts from the contact synchronization option, within the Co-Fit app device section. Once you do so, access the smartwatch main menu and tap on the blue icon showing a person. Here you will see the contacts that you have previously chosen through Co-Fit. Tap on the desired contact to make the call.
  • Dial: Access the smartwatch main menu and tap on the green dial icon. Once inside, you will be able to dial the phone number that you want to call. When dialed, tap on the green phone icon to make the call.
  • Call menu: Access the smartwatch main menu and tap on the blue icon showing a phone. Once inside, you will see 3 options. The first option will allow you to call a contact. The second option will allow you to see a call register; tap on the desired option to make a call. The third option will allow you to dial a phone number. You can also attach this function to the quick access menu.

Notifications
The smartwatch displays your smartphone notifications. This includes apps such as: WhatsApp, Gmail, Instagram, Twitter, LinkedIn, among many others. Make sure to enable all of them through the Co-Fit app.
To access the notifications received, swipe the main screen upward.

Voice assistants
The Core smartwatch is compatible with voice assistants. To correctly configure the voice assistants, you must have successfully synchronized the smartwatch to your smartphone via Co-Fit app and enabled all accesses.
To access this function, enter the smartwatch main menu and tap on the purple icon showing sound waves. Once inside, tap on the voice assistant icon and make your request.

Music control
The smartwatch features a music control tool. Access the smartwatch main menu and tap on the musical note icon. Once inside, you will see several options:

• Play/Pause: Tap on the icon to pause or play the music that you are listening to.
• Previous song/Next song: Tap on the previous or next icon to play the previous or the next song.
• Swap device: Tap on the device icon on the bottom left to swap between the device that’s playing the music. You can swap between your smartphone and the smartwatch.

You can add this tool to the quick access menu.

Remote camera control
The Core smartwatch allows you to take pictures from your smartphone remotely. Access the smartwatch main menu and tap on the camera icon. Once inside, tap on the camera to take a picture from your smartphone.
For this function to work, you must first access the Co-Fit app and leave it open.

Anti-lost function
The smartwatch features an anti-lost function. Make sure that you have enabled this option on the Co-Fit app. This tool will make your phone sound so that you can find it.
To make use of this function, access the smartwatch main menu and tap on the blue smartphone icon. Once inside, tap on the play icon to make your phone sound.

Other functions
The Core smartwatch features a wide variety of other functions, such as: alarm, calculator, calendar, stopwatch, timer, stock market information, weather, breathing exercises, sedentary reminder, among others.

Health

Sports
The Core smartwatch allows you to monitor a variety of sports. Access the smartwatch main menu and tap on the orange runner icon. Once inside, you will see a wide variety of sports, such as: running, climbing, cycling, football, basketball, yoga, among others.
Tap on the desired sport to start the monitorization. Once you do so, real- time sport data will show, such as: heart rate, steps taken, calories burned, and time spent. This data might vary depending on the sport performed.
You can also access running (green runner icon) and cycling (purple cyclist icon) monitorization directly from within the smartwatch main menu. You will also be able to start monitoring your sports from within the Co-Fit app, in the sports section.

Pedometer, calories and distance travelled
The smartwatch automatically registers the steps taken, the burned calories and the distance travelled. To view this information, access the smartwatch main menu and tap on the icon with blue, green and red semicircles.
This data will also appear in the Co-Fit app status section. You can also attach this function to the quick access menu.

Heart rate meter
The Core smartwatch monitors your heart rate automatically. Enable this function from within the Co-Fit app device section and choose the monitorization interval (every 30 minutes, every hour, etc.).
You will also be able to measure your heart rate immediately. To make use of this tool, access the smartwatch main menu and tap on the red heart icon. After a few seconds, the number of heart beats per minute will be displayed.
This data will be displayed in the Co-Fit status section. You can also attach this function to the quick access menu.

Blood pressure meter
The smartwatch allows you to measure your blood pressure instantly. To do so, access the smartwatch main menu and tap on the stethoscope icon.
Once inside, tap on the play icon and stand still. After a few seconds, your blood pressure data will be displayed.
This data will be displayed in the Co-Fit status section.

Blood oxygen saturation meter
The Core smartwatch allows you to measure your blood oxygen saturation levels instantly. To make use of this tool, access the smartwatch main menu and tap on the red blood icon.
Once inside, stand still and, after a few seconds, the blood oxygen saturation values will be displayed.
This data will be displayed in the Co-Fit status section. You can also attach this function to the quick access menu.

Stress meter
The smartwatch features a stress meter. To make use of this tool, access the smartwatch main menu and tap on the blue icon showing a person and a heart.
Once inside, stand still and, after a minute, your stress data will be displayed.
This data will be displayed in the Co-Fit status section. You can also attach this function to the quick access menu.

Sleep monitor
The Core smartwatch functions while you sleep and provides statistics on the time and quality of your sleep. This tool’s available information is more detailed in the Co-Fit app than in the smartwatch:

• In the smartwatch: To consult the time you have slept, access the main menu and tap on the purple moon icon. Once inside, your time slept will be displayed, as well as the time that you have been in deep sleep, light sleep and awake.
• In the app: Your sleep data will also be displayed in the Co-Fit app status section. Here, you will be able to see the time that you have slept, as well as the time that you have been in deep sleep, light sleep and awake. You will also be able to view a weekly and monthly sleeping record with all your sleep data.

You can also attach this function to the quick access menu.

Menstrual cycle
The Co-Fit app allows you to set reminders related to your menstrual cycle. Enter the Co-Fit app device section and tap on the health control option. Once inside, you will be able to set  some data that will be displayed on the smartwatch quick access menu. Data such as your period duration, cycle duration, last menstrual period, as well as period and ovulation reminders.
You will be able to see all your menstrual cycle notifications on the smartwatch quick access menu and keep up to date with your period data.

Exemption clause

1. The Core smartwatch heart rate and blood pressure data should not be used as the basis for any medical or diagnostic decision.
2. Only qualified medical personnel can diagnose and treat cardiovascular disease and high blood pressure problems. Contact your medical center for a medical opinion, and do not treat or diagnose yourself.
3. The Core smartwatch heart rate and blood pressure data may not be accurate due to factors such as signal interference, improper placement of the device, or weather or physiological changes.
4. Do not use the Core smartwatch data to modify your medication or medical treatment. Follow the instructions provided by authorized medical personnel.
5. We take no responsibility for the inaccuracy of the above, nor do we assume any liability for the consequences of the use of such information.

Maintenance recommendations

• Clean the product regularly with a dry cloth. The product must be unplugged or unplugged or switched off when cleaning.
• Keep the product’s ports and connectors clean from dust, dirt, etc., to ensure proper connection.
• Avoid breaking the product. Do not place objects on it or bend it with excessive force.
• If the product has a cable, do not bend or pull it with excessive force to avoid damaging it.
• Do not wet or immerse the product. Always keep the product in a dry place away from moisture.
• When not in use, store the product in a clean, dry place away from moisture and dirt.
• Avoid bumps and drops that could damage the product.
• Do not use the product for any purpose other than that for which it was designed.
• Recycle the product in accordance with local environmental rules and regulations.

Safety information

Please read the following instructions before using the device for the first time:

• When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
• If the product is wet or damaged do not us it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot weather).
• Keep the product away from children.
• Disconnect or switch off the product if you are not going to use for a long period of time.
• Do not use the device if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
• Do not dismount or modify the product. These actions will invalidate the Warranty.

Legal Note

Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product.  Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal

This symbol indicates that electrical and electronic equipment is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste
• The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• For more information, contact the retailer or the local authorities in charge of waste management.

Conformidad CE / CE Declaration of
Certificamos que el producto descrito a continuación es conforme con el marcado CE y la directiva RED, de acuerdo con las siguientes normas europeas:/ We hereby declare that the product (s) listed below satisfies the provision for CE-marking according to the following European directive(s): / Certificamos que o produto descrito a continuação é conforme o marcado CE e adiretiva RED, de acordo com as seguintes normas europeias:

• ETSI EN 301 489
• ETSI EN 300 328
• EN 62479: 2010
• EN IEC 62368

Artículo/Article/Artigo: BXSW16N / BXSW16R
EAN: 8427542130613 / 8427542130620
Fabricante / Manufacturer/ Fabricante:

ATLANTIS INTERNACIONAL, S.L.
Dirección / Address / Endereço:
Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>