DewertOkin FS2409A Hand Controller User Manual
- June 26, 2024
- DEWERTOKIN
Table of Contents
DewertOkin FS2409A Hand Controller
Specifications
-
Product: Massage Recliner with Air Headrest and Lumbar
Support -
Heating Pad Function:
- Three temperature levels
- Auto shut-off after 30 minutes
-
Air Massage Function:
- Three massage modes
- Auto shut-off after 45 minutes
-
USB Charging Ports:
- USB A/C total output: 10W (5V/2A)
- For charging mobile devices only
- Do not use USB splitters/extenders or charge multiple devices
simultaneously
USB Charging Ports
Use USB A/C ports for charging mobile devices only. The total output is 10W
(5V/2A). Do not use splitters/extenders or charge multiple devices at once to
prevent damage.
FAQ
Q: Can I leave the heating pad or air massage functions on for an extended
period?
A: For safety reasons, both functions will automatically turn off after a
certain period (30 minutes for heating pad, 45 minutes for air massage). It is
recommended not to leave them on for an extended period.
Hand controller
User Manual
- Heating Pad
- Press the ‘Heating Pad’ button to activate the function.
- There are three temperature levels. The light color changes from green to yellow to red to indicate an increase in heating pad temperature.
- For safety, the function will automatically turn off after 30 minutes of operation.
- Press the ‘Home’ button to turn off the heating function with one touch, or press the ‘Heating Pad’ button until the light turns red, then press again to manually turn off.
- Air Massage
- Press the ‘Air Massage’ button to activate the function.
- There are three massage modes. The light color of green, yellow and red indicate different massage modes.
- For safety, the function will automatically turn off after 45 minutes of operation.
- Press the ‘Home’ button to turn off the air massage function with one touch or press the ‘Air Massage’ button until the light turns red, then press again to manually turn off.
- Home
- Press and hold the ‘Home’ button to close simultaneously recliner, headrest, and air lumbar to their original positions. Air massage and heating pad will stop simultaneously.
- USB Charging Ports
- USB A/C ports are for charging mobile devices ONLY (not compatible with computers).
- USB A/C total output 10W (5V/2A).
- DO NOT USE USB SPLITTER/EXTENDERS, DO NOT CHARGE MULTIPLE DEVICES AT ONE TIME, OTHERWISE DAMAGES COULD OCCUR.
By following these instructions, you can easily operate and enjoy the various features and functions of your switch. If you encounter any issues or require further assistance, please consult the user manual or contact customer support.
WARNING!
Do not operate where aerosol (spray) products are being used, or where oxygen
is being administered.
Do not allow water to enter the button crevices or charging ports of the
switch.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference e to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.
ISED Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
- The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
- This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
- This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with minimum distance 0cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>