Dewertokin Technology Group RF5111 Remote Control Instructions
- June 6, 2024
- Dewertokin Technology Group
Table of Contents
Technology Group RF5111 Remote
Control Instructions
appearance
Key function
| Key-value | Specification |
|---|---|
| PAIR | press and hold + Dutton,the remote enters pairing mode, backlight LED |
flashes, When the pair succeeds, the backlight stops flashing then normally
on.
HEAD UP| Press and hold button, the head actuator moves out, stop when
released
HEAD DOWN| Press and hold button, the head actuator moves in, stop when
released
FOOT UP| Press and hold button, foot actuator moves out, stop when released
---|---
FOODTOWN| Press and hold the button. foot actuator moves in. stop when
released
FLAT| Click button. the bed goes flat
ZG| Click button. the bed moves to zero position. press and hold the zeroG
button for 5s. until backlight flashes, the control set the current position
as zeroG position
TV/PC| Click the button, the bed moves to TV/PC position, press and hold TV/PC
button for 5s, until backlight flashes, the control set the current position
as TV/PC position
Antisnore| Click button. the bed moves to the Antisnorc position. press and
hold the Antisnorc button for 5s. until the backlight flashes. the control set
the current position as Antisnorc position
MI| Click the button, the bed moves to M I position. press and hold M I button
for 5s. until backlight flashes, the control set the current position as MI
position
M2| Click the button, the bed moves to M2 position, press and hold M2 button
for 5s. until backlight flashes, the control set the current position as M2
position
FLASHLIGHT| Press and hold the button. open flash; light. close when released
FCC Statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions.
- This device may not cause harmful interference. and
- This device must accept any interference received. including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates. uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED RSS Warning/ISED RF Exposure Statement ISED RSS Warning:
This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirements.
Documents / Resources
|
Dewertokin Technology Group RF5111 Remote
Control
[pdf] Instructions
RF5111, 2AVJ8-RF5111, 2AVJ8RF5111, RF5111 Remote Control, Remote Control
---|---