medela 15400091 Hands Free Wearable Electric Breast Pump Instruction Manual
- June 1, 2024
- medela
Table of Contents
medela 15400091 Hands Free Wearable Electric Breast Pump
Specifications
| Aspect | Detail |
|---|---|
| Weight of Pumping Unit | 1.18 lbs (535 g) |
| Power Adapter Input | 9.0 VDC 2A |
| Power Adapter Output | 9.6 – 12 VDC 2A |
| Operating/Storage Humidity | 15% – 93% |
| Transport/Storage Humidity | 15% – 93% |
| Operating/Storage Pressure | 70kPa – 106kPa |
Product Usage Instructions
Warnings and Contraindications:
Read all instructions before using this product. There are no known
contraindications for the use of this product. Warning: May cause serious
injury or death.
Assembly and Preparation:
- Assemble the breast shield kit by connecting the tubes and funnels as instructed.
- Ensure hands are clean and dry before handling the product.
Using the Breast Pump:
- Insert the unused end of the tube into the tube holder.
- Attach the appropriate funnel size to the breast shield.
- Connect the long end of the tube to the breast pump.
- Insert the pouring spout into the opening of the funnel.
- Push the outer cover and sealed funnel until you hear a click.
Warning and Precautions
Warning: Failure to follow these warnings can cause serious injury or death.
Caution: Failure to follow these precautions can cause minor injury.
Notice: Incorrect use of the breast pump may produce undesired results.
Product Description
The Pump In Style with MaxFlow is a hands-free, double electric breast pump designed for frequent use.
How to Assemble the Breast Milk Extraction Kit
- Ensure hands are clean and dry before handling the breast pump parts.
- Connect the short end of the tubing to one or both breast shield connectors.
- Align the yellow membrane disc on the valve head, ensuring it is properly seated.
- Insert the pouring spout into the opening of the breast shield connector and push until it clicks into place.
- Attach the flat end of the tubing to the breast pump as far as it will go.
- For disassembly and reassembly of the O-ring, remove the bottom tab from the breast shield and ensure the ridges face outward when placing it back.
Operating Your Breast Pump
Find your Maximum Comfort Vacuum™ setting that provides the best balance of comfort and efficiency for you.
Cleaning and Maintenance
To disassemble and reassemble the O-ring, follow these steps:
- Pull out the bottom tab from the breast shield.
- Place the O-ring on the outer edge of the breast shield with ridges facing outwards.
- Press along the groove to ensure it is in place all the way around.
**Troubleshooting
**
If the breast pump has been submerged in water, refer to the manufacturer’s guidelines for proper handling.
Additional Information:
Find your Maximum Comfort VacuumTM for optimal performance.
Problem Solving
Problem:
The breast pump has been submerged in water.Solution:
Do not submerge the breast pump or its components in water.Symbol Meanings
Symbols used in association with the product align with ISO 15223-1:2021, covering various aspects such as manufacturer, catalogue number, lot number, serial number, fragility, sunlight exposure, dryness, temperature limits, and more.
Technical Description and Compatibility
This device complies with RF emissions standards CISPR 11 for both group 1 and class B. It has been tested for immunity to various levels of RF conducted and radiated interference.
Contact Information
For any inquiries or support, you can contact Medela LLC or Medela Canada through the provided phone numbers and email addresses, or visit their respective websites.
Please note that due to the complexity and length of the documents, some sections might not be fully transcribed within this response. The response provides a formatted HTML structure that includes headings, paragraphs, lists, tables, definition lists, and hyperlinks where appropriate, based on the contents from the images provided.
Medela LLC 1101 Corporate Drive McHenry, IL 60050 USA 800-435-8316 or 815-363-1166 customer.service@medela.com www.medela.us
Distributed by Medela Canada Inc. 4160 Sladeview Crescent, # 8 Mississauga, ON, L5L 0A1 Canada Phone 800-435-8316 and 905-608-7272 info@medela.ca www.medela.ca
FAQ
What should I do if water gets into the breast pump?
If water gets into the breast pump, refer to the manufacturer’s guidelines
for proper handling and maintenance.
How do I clean the breast pump components?
Refer to the user manual for detailed cleaning instructions.
Where can I find more information about breast milk guidelines?
Visit http://BreastMilkGuidelines.com for
more details.
How do I choose the correct breast shield size?
For information on selecting the correct size, visit
http://MedelaBreastShields.com.
Where can I get customer support?
For support, visit http://www.medela.ca or
http://www.medela.us.