HAYLOU S35 ANC Over-Ear Headphones User Manual
- June 10, 2024
- Haylou
Table of Contents
HAYLOU S35 ANC Over-Ear Headphones User Manual
Package List
headphones
charging cable
audio cable
user manual
Button Functions
Button function
Functions| Operation
Answer/hang up call| Click the MFB
Reject a call| Press and hold the MFB for is
Play/pause music| Click the MFB
Skip track forward| Double click the MFB
Skip track backward| Triple click the MFB
Volume +| Click the volume button
Volume –| Press and hold the
volume button for is
ANC on/ANC off/
transparent switching| Click the ANC button
Touch control function
Functions| Operation
Temporary transparent mode| Press and hold to turn to turn off
Gaming mode| Double click to turn on/off
Activate voice assistant| Triple click to activate
Headphone settings
Turn on/off: Press and hold the MFB for more than 2s until the indicator changes (The white light stays on for 2s when turning on. the red light stays on for 1s when turning off)
Bluetooth pairing:
- When there is no device pairing record, the headphones will automatically enter pairing mode when turned on;
- When there is a pairing record, the headphones will automatically enter pairing mode if there is no connection after turning on and waiting for 10s:
- When there is a pairing record and the headphones are in power-off state. press and hold the MFB for 5s to turn on and enter pairing mode.
Mobile phone connection:
Turn on Bluetooth of the mobile phone and search for “HAYLOU S35 ANC”. then
click to connect.
Restore factory settings:
Simultaneously press and hold the MFB and ANC button for more than 3s (The
white light stays on for 2s)
Dual-device connection
‘HAYLOU S35 ANC’ can connect to two devices at the same time to realize seamless switching between the two devices. This function is disabled by default.
- After the headphones are turned on. they will connect to the first device:
- After the headphones are turned off, press and hold the MFB for about 5s to enter pairing mode. they will connect to the second device:
- Select Bluetooth connection with the headphones on the first device.
Headphone basic parameters
- Product name: Bluetooth over-ear noise canceling headphones
- Product model: Haylou S35 ANC
- Communication range: 10 meters (open environment without obstacles)
- Battery capacity: 600mAh
- Battery capacity: above 2.5h
- Playtime: 60h (ANC OFF), 40h (ANC ON)
- Standby time: about 20 days (ANC OFF)
- Input parameters: 5V —1A
- Battery type: Li-ion polymer battery
- Wireless connection: Bluetooth 5.2
- Bluetooth protocols: A2DP, AVRCP, HFP
The above data is obtained from Haylou’s internal laboratory tests under specific conditions and is for reference only It may vary in actual use depending on user habits and environment.
Caveats
Warning
- Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product.
- Do not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).
- Keep the indicators away from the eyes of children and animals while using the headphones.
- Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
- Do not wipe and clean the headphones or their case with alcohol or other volatile liquids.
- Avoid any contact with liquids.
Note
- Please read this user manual carefully before using the product and please properly store it.
- When using for the first time, please fully charge this product.
- Please charge the product, in case it has not been used over two weeks.
- Please use certificated charger.
- Do not wear headphones for a long term to protect your hearing.
- Do not wear headphones in any situations with potential risks as wearing them may reduce your perception to the outside world.
Daily maintenance
Please do not shower with headphones. Do not wear them in rainy day. Do not
leave them in washing machine or other extreme situations. Clean them with dry
cloth.
FCC Requirement
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Cet appareil se conforme a RSS247 de Canada d’Industrie. appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif dolt accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Warranty Card
Warranty Period 12 months after you purchase this item. ( or you may inquire your local shopper for more details.)
Free Service
Supposing any defects caused by quality issues occur within the warranty
period, please take this warranty card and purchase receipts to your
distributor for free exchange service.
Model Number|
---|---
Date of Purchasing|
User’s Name|
User’s Phone|
User’s Address|
Shop’s Name|
Shop’s Address|
Comments|
Free exchange service will not be accessed under following circumstances:
- Damages caused by unauthorized disassembly.
- Defects or physical damages caused by leaking or dropping off
- Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.
Manufacturer: Dongguan Liesheng
Electronic Co.. Ltd.
Address: Room 401-410. Building 1. No.86
Hongtu Road. Nancheng District.
Dongguan City, Guangdong. China
Web: www.haylou.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>