SILENCERCO 33 Dead Air Nomax Installation Guide
- August 16, 2024
- SILENCERCO
Table of Contents
SILENCERCO 33 Dead Air Nomax
Product Specifications
- Thread Size: 1/2 – 28 (.500-28)
- Compatible Calibers: 22 caliber, 9mm, 30 caliber
- Manufacturer: SilencerCo, LLC
- Address: 5511 S 6055 W, West Valley, UT 84118
Product Usage Instructions
Overview
This product is designed for use with centerfire rifles and SilencerCo accessories. It is important to adhere to recommended machining tolerances and specifications to ensure compatibility and safe operation.
Compatibility
The 1/2 – 28 thread size is commonly used with 22 caliber, 9mm, and 30 caliber rifles. SilencerCo offers mounting options for all products with 1/2 – 28 threads. Centerfire rifle accessories should shoulder behind the threads.
Recommended Machining Tolerances
The product specifications include specific thread types and tolerances for optimal fit and compatibility with SilencerCo accessories. Tighter tolerances are recommended for a universal fit.
Installation
- Ensure the barrel crown is intact or cut a new crown if removed during the machining process.
- Verify the thread size and pitch match the product specifications.
- Shoulder the accessories behind the threads as indicated.
- Follow machinist notes for proper handling during installation.
Frequently Asked Questions
Q: What calibers are compatible with the 1/2 – 28 thread size?
A: The 1/2 – 28 thread size is commonly used with 22 caliber, 9mm, and 30 caliber rifles.
Q: What are the recommended machining tolerances for this product?
A: Tighter tolerances are recommended for a universal fit with SilencerCo accessories.
Q: Are there specific installation instructions to follow?
A: Yes, it is essential to ensure the barrel crown is intact, match thread specifications, shoulder accessories properly, and follow machinist notes during installation.
PART 1 OF 2: THIS DOCUMENT SERVES AS A GUIDE DETAILING RECOMMENDED MACHINING TOLERANCES AND THE COMPATIBILITY OF CENTERFIRE RIFLE MUZZLE THREADS WITH SILENCERCO ACCESSORIES. WHILE THESE SPECIFICATIONS AND TOLERANCES MAY ALIGN WITH SOME OTHER MANUFACTURERS’ PRODUCTS AND EXHIBIT COMMONALITY WITH MOST OF SAAMI’S SPECIFICATIONS, THE RESPONSIBILITY FOR ANY DAMAGE, INJURY, OR INCOMPATIBILITY WITH OTHER MANUFACTURERS’ PRODUCTS RESTS WITH THE END USER AND/OR THE MACHINIST. IF THE FACTORY BARREL CROWN IS REMOVED DURING THE MACHINING PROCESS, IT IS THE RESPONSIBILITY OF THE MACHINIST TO CUT A NEW CROWN. ALL NFA RULES APPLY WHEN SELECTING RIFLE BARREL LENGTHS.
PART 2 OF 2: THIS DOCUMENT SERVES AS A GUIDE DETAILING RECOMMENDED MACHINING TOLERANCES AND THE COMPATIBILITY OF RIMFIRE & CENTERFIRE PISTOL MUZZLE THREADS WITH SILENCERCO ACCESSORIES. WHILE THESE SPECIFICATIONS AND TOLERANCES MAY ALIGN WITH SOME OTHER MANUFACTURERS’ PRODUCTS AND EXHIBIT COMMONALITY WITH MOST OF SAAMI’S SPECIFICATIONS, THE RESPONSIBILITY FOR ANY DAMAGE, INJURY, OR INCOMPATIBILITY WITH OTHER MANUFACTURERS’ PRODUCTS RESTS WITH THE END USER AND/OR THE MACHINIST. IF THE FACTORY BARREL CROWN IS REMOVED DURING THE MACHINING PROCESS, IT IS THE RESPONSIBILITY OF THE MACHINIST TO CUT A NEW CROWN.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>