DEWERTOKIN RF61 Remote Control Instructions
- June 9, 2024
- DEWERTOKIN
Table of Contents
2021-9-17
Gary
Instruction of RF61
HEAD UP
Press and hold HEAD UP button of remote, head actuator moves out, stop when released；
Head Down
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；
FOOT UP
Long press the corresponding button, the foot driver extends, release the driver to stop running
FOOT DOWN
Long press the foot down button, the foot driver retracts, release the driver to stop running
FLAT
Click the FLAT button and release it, the head and foot drivers run to the lowest position (when the driver is idle, the vibration motor can be turned off with one button, and the indicator light of the vibration motor can be turned off), and the action will stop when any button is pressed;
FCC Statement：
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including in terference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s aut hority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not instal
led and used in accordance with the instructions, may cause harmful
interference to radio communications. Howe ver, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
without restriction.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
ISED Statement
This device complies with Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>