HOMAVIDA HHLF01 Floor Lamp User Manual

HOMAVIDA HHLF01 Floor Lamp

FCC Regulatory Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Thank you for purchasing the Homavida Floor Lamp. This lamp offers versatile lighting options with a modular design, adjustable height, color customization, music mode, and convenient control.

IMPORTANT SAFETY INSTRUCTIONS

1. For indoor use only. Do not use outdoors.
2. Use the lamp only for its intended purpose.
3. Exercise close supervision when children are near the lamp.
4. Always unplug the lamp before cleaning.
5. Do not stare directly at the lights.
6. Do not leave the lamp unattended while in use.
7. Keep the lamp and lamp cord away from hot/heat sources, water or other liquids.
8. Keep away from combustible materials.
9. Do not operate the lamp if damaged or not functioning properly.
10. Keep the lamp cord away from the middle of the room to prevent tripping hazards.
11. When disconnecting, grip the plug and pull from the wall outlet, never pull on the lamp cord itself.
12. Do not attempt to disassemble the lamp. There are no user-serviceable parts within this kit.
13. Damaged external cord should only be replaced by the manufacturer or authorized personnel to avoid hazards.
14. Use only with the provided power adapter.
15. Do not touch the mains plug with wet hands.

PREPARATION

Connect the lamp tube and spotlight Insert the lamp tube into the connection and secure it in sequence.

About the Batteries

1. Replace all batteries of a set at the same time.
2. Clean the battery contacts and also those of the remote control prior to battery installation.
3. Ensure that the batteries are installed correctly with regard to polarity (+ and –).
4. In case of ingestion of a battery, seek medical assistance promptly.
5. Do not short-circuit batteries; Do not charge batteries; Do not force discharge of batteries;
6. Do not heat batteries; Do not dismantle batteries; Do not dispose of batteries in fire.
7. Do not mix new and used batteries or batteries of different types or brands.
8. Exhausted batteries should be immediately removed from the remote control and properly disposed of.
9. When discharged batteries are kept in the remote control for a long time, electrolyte leakage can occur causing damage to the remote control and/or personal injury.
10. Do not expose batteries to excessive temperatures.
11. Remove batteries from remote control if it is not to be used for an extended period of time unless it is for emergency purposes.
12. Store unused batteries in their original packaging away from metal objects. If already unpacked, do not mix or jumble batteries.
13. Do not encapsulate and/or modify batteries.
14. Always select the correct size and type of batteries suitable for the intended use. Refer to the information inside the remote control to ensure the correct selection of batteries.

WHAT’S IN THE BOX

• 1 x Lamp Base
• 3 x Lamp Tubes
• 1 x Spotlight
• 1 x Remote Control
• 2 x AAA Batteries
• 1 x Power Adapter
• 1 x User Manual

SPECIFICATIONS

• Product Name: Floor Lamp
• Model: H-HLF01
• Input: DC 12V 1.5A
• Rated Power: 18W
• LED Type: 5050RGB
• Bead Type: 6070
• Total Height: 4.4ft/ 135.2cm

PREPARATION

Connect the lamp tube and spotlight Insert the lamp tube into the connection and secure it in sequence. The spotlight operates independently and cannot be controlled by the remote control. To turn it on, flip it up slightly. You can rotate it
horizontally by 360° and vertically by 120°. To turn it off, simply place it back in its original position.

• Install the batteries into the remote control
• Slide the battery cover to open the compartment.
• Insert the AAA batteries into the compartment, ensuring they are positioned correctly with the positive (+) and negative (-) ends aligned properly.

Plugin
Connect the lamp to a power outlet.

CONTROLLING THE LAMP

1. White light
2. ON/OFF
3. Scene mode
4. Timer
5. Brightness
6. Music mode 1
7. Music mode 2

Via the “Magic Lantern” app  Download
Scan the below QR code or search “Magic Lantern” to download the app from

Apple Store or Google Play
Apple and the Apple Logo are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play is a trademark of Google LLC.

PAIR YOUR DEVICE
Tap “Allow” to enable Bluetooth. This will initiate the automatic connection between the lamp and your phone. To view the connected list, tap on the icon located at the top-left corner of the homepage.

Note: If you fail to connect, unplug the lamp and try again

About the app

1. Tap to switch to the colour pickers
2. RGB value display
3. Tap to input the precise value you desire.
4. Tap to turn ON/OFF the lamp.
5. Slide to adjust the brightness.
6. Tap to select preset monochrome.
7. Tap to switch to other modes.

In Style mode, you can select preset scenes and adjust its speed. In Music mode, the lighting effects synchronize with the music being played, creating a visually immersive experience. Steps to download local music on an iPhone:

1. Install iTunes software on your computer (Apple or Windows) and log in with the same Apple ID used on your iPhone.
2. Use iTunes to import downloaded music files from your computer, which will automatically sync to your iPhone.
3. Restart the Magic Lantern app on your iPhone.
4. Switch to Music mode in Magic Lantern to access and enjoy the newly imported music with synchronized lighting effects.
5. In Mic mode, the lighting effects adjust and synchronize in response to sound or voice inputs, creating an immersive visual experience.
6. In Timer setting, you can schedule precise timing for various lighting effects to turn on or off the lamp.

Cleaning Instructions

1. Gently wipe the surface of the lamp tubes using a soft, dry sponge or cloth.
2. Avoid using abrasive cleaning tools like steel wool, scouring sponges, or stiff brushes.
3. Never use strong cleaning agents such as white spirit, turpentine, household glass cleaner, or cellulose thinners.

Troubleshooting

US Importer: JOICOM CORPORATION
14129 The Merge Street, Building 3 Unit A, Eastvale, CA 92880
Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd.
No. 810-C063, 8th Floor, Xiangbin International Financial Centre, No.18, West Free Trade Street, China Special
Economic Zone, Qianhai Bay, Shenzhen, Guangdong Province, 518000 China

Warranty (1-Year Period)
The manufacturer’s warranty is void under the following circumstances but not limited to:

• Improper or inadequate maintenance or modification.
• Accident, misuse, abuse, contamination, or other external causes.
• The use of unspecified adapters and accessories.
• Loss or damage in transit.
• Damages that occur as a result of one’s failure to follow the instructions.
• This warranty does not apply to expendable or consumable parts and does not extend to any product from which the serial number has been removed.

Customer Service
We have an award-winning warranty, exchange, and customer service team that guarantees hassle-free solutions to any issue you might have within business hours.

TEL: +1(844) 417 0149 (US ONLY)
Monday-Friday 9:00 AM-4:30PM
E-MAIL: [email protected]

For defective products or the return of items, please contact us with your order number within the specified warranty period. DO NOT dispose of any product parts as they may be required for inspection/repair.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>