Dewertokin Technology Group HVIN:RF45 Remote Control User Manual
- June 6, 2024
- Dewertokin Technology Group
Table of Contents
**Dewertokin**
User Manual
1 appearance
PMN: REMOTE CONTROL
HVIN:RF45
2 Key function
| Key value | Specification |
|---|
PAIR
| ****
press and hold button, the remote enters pairing mode,
backlight LED flashes, When the pair succeeds, the backlight stops flashing then normally on.
Hi
| press and hold Hi button, the lumbar actuator moves out, stop when released
Lo
| press and hold button , the lumbar actuator moves in, stop when released
HEAD UP
| Press and hold button, head actuator moves out, stop when released
---|---
HEAD DOWN
| ****
Press and hold button, head actuator moves in, stop when released
FOOT UP
| Press and hold button, foot actuator moves out, stop when released
FOOT DOWN
| Press and hold button, foot actuator moves in, stop when released
FLAT| **** Click the button, the bed goes flat
ZG
| ****
Click button, the bed moves to zero position, press
and hold zero button for 5s, until backlight flashes, the control set the current position as zero position
TV/PC
| Click the button, the bed moves to TV/PC position, press and hold TV/PC button for 5s, until backlight flashes, the
control set the current position as TV/PC position
UNDER-BED LIGHT
| Click button, the under bed light switch its on/off state;
After the under bed light opens, if do not manually close, it will automatically turn off after 5 minutes;
MEMORY
| ****
Click button, the bed moves to MEMORY position,
press and hold MEMORY button for 5s, until backlight flashes, the control set the current position as MEMORY position
FLASHLIGHT
| Press and hold button, open flashlight, close when released
MASSAGE HEAD
| Click button, head massage motor switch its intensity among 1-2-3-0
MASSAGE FOOT
| Click button, foot massage motor switch its intensity among 1-2-3-0
TIMER| If the massage motors do not work, the button is invalid, if the
| ****
massage motors work, click the button to switch the massage time, when massage time switch to 0, turn off the massage;
---|---
INTENSITY+
| if the massage motors work, click the button to increase massage intensity among 1-2-3-0.
INTENSITY-
| if the massage motors work, click the button to decrease massage intensity among 3-2-1-0.
MASSAGE TYPE
| Click the button, to switch the massage mode of massage motors, massage mode switches among type0à type1→type→type→type0; this button can only switch the massage mode, it can not open massage motors；
FCC Warning ：
Please take attention that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
the device.