ALAN KY-P138 Dental Operation Light User Manual

ALAN KY-P138 Dental Operation Light

Preface
Please kindly read this user manual before assembling and using this product, and keep it well for repeated use. Please carefully follow the instruction and do the maintenance correctly. Please mind the passage with “Warm” and “Attention”, read carefully, and follow strictly, avoid doing harm to the user and the device. Please contact our sales agent immediately for repair when you find something wrong with this device.

Safety cautions
Before starting this device, please obey the basic safety precautions listed below, so as to keep
away from the risk of damage to the device, or harm to the user, as well as causing fire, or electric shock.

• Comply with the instructions on the device and the manual, if you can not understand the instructions please ask our after-sales service staff or sales agent for help.
• Please shut down the power supply before repairing or cleaning the device.
• No placing and hooking any heavy things on the device.
• No using the power wire is unsuitable to this device, otherwise, it must degrade its performance, even damage the device, or cause fire or electric shock.
• Do not remove or mend the device without agreement from our agent or our technician, thus avoiding the incident of electricity shock and damage to people or devices.
• Please only adjust the controllable items mentioned in the instruction correctly, adjusting other controlling volumes wrongly will damage the device.

This manual is limited to be used for KY-P138, the data or details shown herein are available when this manual is posted, and we may revise some indexes or designs without notifying the users.

Attention: Warranty is not valid if these rules below are not followed.

• Follow the instructions correctly.
• Use the device according to the instructions only.
• The power supply wire must be qualified with the demand of the power of this dental lamp.
• This dental lamp should be fixed firmly.
• Any repair, modification, or revision to this Dental lamp should be performed by the engineer appointed by us.
• The components that need to be changed should be adopted the ones for ours, otherwise may reduce the performance and or destroy the device.

Description

• Intended Use
  The item is used for the diagnosis, cure and operation of the medicine department.

• General Introduction
  Product structure and components, as shown below, picture 1:

1. Light handle
2. Machine handle
3. Lens
4. On/Off Bottom
5. Induction Window
6. show function
7. Temperature control touch draw slip
8. illuminance control touch draw a slip
9. rotation shaft

Environmental Requirement

• Storage Transportation Environment:
  • Temperature: – 20°C – -70°C
  • Relative Humidity: 10% – 90%

Use Environment:

• Temperature: 5°C— 45°C
• Relative Humidity: 10% – 90%
• Atmospheric Pressure : 500 – 1060 hPa

Specification:

• Input Voltage : AC12-24V
• Frequency: 50/60Hz
• Power: 38W
• Illumination: 30000 – 900000 LUX can be adjusted
• Color Temperature: 4000 K-5500K can be adjusted
• Spot Size: 0120mm (Distance for 900mm)
• Control Method: Induction Switch, 8-grade Illumination of touch draw slip can be adjusted; 8-grade temperature of touch draw slip can be adjusted.

Operational Approach

1. The angle of the handle on the LED dental lamp can be adjusted according to the User’s requirements.
   As shown below, picture 2:

2. Control Method: 1) To open or close by induction:

3. To control the ON/OFF of the white light by crossing the sensor from 10-30mm, the buzzer will “range” once when closed, and will “range” twice when open.

4. To open or close by button: To control the ON/OFF of the white light by touching the button, the buzzer will “range” once when closed, and will “range” twice when open.

5. temperature control: as shown below in picture 3: Put your hand in the place of the touch draw slip in picture 3, adjusting the temperature by up or down, 8-grade temperature 4000K-5500K can be adjusted.

6. Illuminance control: as shown below in picture 4: Put your hand in the place of the touch draw slip in picture 3, adjusting the illuminance by up or down, 8-grade Illuminance 30000-90000 LUX can be adjusted.

Washing and Sterilization
The transparent lens of the LED dental lamp can be scrubbed and cleaned by lens paper. The shell and handle can be washed by neutral cleaning fluid, alcohol and disinfectant.

Installing Instruction and Specifications:

1. Installing Instruction
   To connect the plug of the led dental lamp and arm, tighten the led dental lamp and arm by M5 screw, then connect the arm to the AC12-24V power of the dental chair.

2. Schematic Circuit Diagram

Packing List:

1. LED lamp : 1 set
2. Handle:  1 pcs
3. Allen key: 1 pcs
4. Hex screw: 1 pcs

https://www.alandental.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>