BLAUPUNKT ATF501 Desk Fan Instruction Manual

: June 5, 2024
: Blaupunkt

Table of Contents

Efficiency information
Important notes
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Desk fan
Stolen ventilator
ATF501

Efficiency information

AT F501

Description| Symbol| Value| Unit
Maximum fan flow rate| F| 57,1| m3/min
Fan power input| P| 49,1| W
Service value| SV| 1,05| (m3/min)/W
Standby power consumption| PSB| 6| W
Fan sound power level| ISA| 53,818| dEktm
Maximum air velocity| C| 2,11| meters/sec
Measurement standard for service value| EN 50564: 2011
IEC 60879:1986
EN 60704-2-7:1998
Contact details for obtaining more information| 2N-Everpol Sp. z o.o.
ul. Pulawska 403A
02-801 Warsaw, Poland
phone: +48 22 331 99 59
e-mail: info@everpol.pl
www.blaupunkt.com

Important notes

Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
This device is for domestic use only. Do not use for any other purposes.
The device should only be connected to a socket with values corresponding to the values on the rating label.
It is necessary to check if the total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
Do not let the cord hang over the edge of the counter, or touch any hot surface.
The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
Before maintenance work always disconnect the unit from the power supply.
When unplugging the power cord from the electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.
Damage to the power cord or plug can lead to an electrocution hazard.
Never leave the product connected to the power source without supervision.
Never put the power cable, the plug or the whole device into the water or any other liquids.
The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment, must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.
Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
Never use the product close to combustibles.
Never expose the product to atmospheric conditions such as direct sunlight or rain, etc… Never use the product in humid conditions (like a bathroom or camping house).
The power cable should be periodically checked for damage.
If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it.
All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user.
Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories that are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
Do not block the airflow or cover the device.
Regularly clean the fan of dust so that dirt does not block the airflow.
Do not insert any objects between the machine’s protective grilles.
Do not use the fan in rooms with high humidity, such as bathrooms, etc. Do not place the fan in places where it could fall into a bathtub, wash basin or another water tank.
Never use the fan without the fan grilles installed.
Do not turn on the fan if it is not assembled properly, particularly when fan grilles are not installed.
Do not place the fan near curtains or other objects that can get accidentally caught by the fan.

The device is compliant with EU directives: – Low voltage directive (LVD)
– Electromagnetic compatibility (EMC)
Device marked CE mark on the rating label
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. The used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance In the common waste bin.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam(buffer) and polyethylene (bags, protective foam sheet). Your system consists of material that can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries, and old equipment.

Your products is designed a manufactured with high-quality materials and components, which can be recycled and reused.

Technical data
Power: 55W
Power supply: 220-240V—SOHC

Front fan grille
Fan blade nut
Fan blade
Back grille fixing nut
Back grille

| 8. Motor shaft stem7. Motor housing8. Oscillation lock
9. Grille fixing screw
10. Control panel with buttons
11. Base
---|---

APPLIANCE ASSEMBLY AND DISASSEMBLY

Make sure the appliance is disconnected from the power source.
Assembly:
a) Place the motor body (7) in the base (11).
b) Put the back grille (5) on the motor base (pay attention to the notches).
c) Screw on the back grille fixing nut (4).
d) Put on the fan blade (3) paying attention to the notch in the stem (6) and the fan blade opening.
f)Tighten the fan blade fixing nut (2)
g) Install the fan’s front grille (1) by fitting the edge into the hooks on the back grille. Then secure by tightening the grille’s fixing screw (9).
Disassembly: a) Perform the disassembly in the reverse order of the assembly procedure.

FAN OPERATION

Before connecting the fan to the power supply, make sure that the button on the control panel is set to O. Connect the appliance to the power supply.
To start the fan, press one of the buttons on the control panel: 1 – low speed 2- medium speed 3 – high speed
To turn off the fan, press the 0 buttons on the control panel.
Oscillation. To enable the fan’s oscillation movement, press the oscillation lock. To disable the fan’s oscillation movement, lift the oscillation lock.
Vertical tilt adjustment. To change the fan tilt, hold the appliance in position and tilt the motor body.

CLEANING AND MAINTENANCE
Before cleaning and maintenance, make sure that the fan has been disconnected from the power source.
The fan should be cleaned regularly. Body and posture should be wiped with a dry cloth. The interior should be blown out with compressed air or vacuumed with a vacuum cleaner

Competence Center
2N-Everpol Sp. z o.o.
ul. Pulawska 403A
02-801 Warsaw, Poland
phone: +48 22 331 99 59
e-mail: info@everpol.pl
www.blaupunkt.com
In case of questions or problems
please contact our service.
Tel. 00 48 22 331 99 54 E-mail: sda@blaupunkt.pl
All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.