ALAN Dental Equipment M-91B 8 Inch LCD Monitor Teeth Whitening Installation Guide

ALAN Dental Equipment M-91B 8 Inch LCD Monitor Teeth Whitening

Introduction

Introduction of products
Dear customers, Thanks for buying our company’s products, this product is a multifunctional teeth bleaching machine, it contains teeth bleaching, intraoral camera and an 8inch monitor. It makes the machine more useful and convenient.

Standard configuration

4. Teeth Whitening Accelerator’s foot

stand

| 1 piece
5. Teeth Whitening Accelerator’s remote

control

| 1 piece
6. camera 5pin cable(1.5M)| 1 piece
7. TF card+card converter+small white

box+USB card reader

| 1 set
8. 12V adaptor( white colour)| 1 piece
9.Goggles| 2 piece
10.Camera sleeves| 50 piece
11. Power supply| 1 piece
12.Mouth retractor| 1 piece
13. lampshade| 20 piece
14. Assembly Tool| 1 piece
15.Camera holder| 1 piece
16.AV cable| 1 piece
17.Disk( Manual inside)| 1 piece

Optional configuration

1. Wireless transmitter M-91B
2. Wireless receiver M-97B
3. Small screen M-99

Characteristic

1. Combines 8-inch LCD monitor, teeth whitening machine and an intra-oral camera. It’s a multi-functional all-in-one teeth whitening machine. .
2. High-efficiency goose pipe design, adjust angle at random, convenient for use.
3. Combination of 4 pieces High power LED.
4. Tunable bleaching time with microprocessor-controlled timer presets.
5. High pixels for dental cameras with built-in SD cards, it can save the pictures permanently.
6. Convenient for dentists to make a contrast before and after treatment from the screen.
7. High-sensitive infrared remote control function.
8. Small base size design, suitable use in dental clinic
9. Can upgrade to a wireless and wired system

Function

inch LCD monitor Specification

1. LCD size: 8 inch (Diagonal)
2. Driver element: a-Si TFT active matrix
3. Resolution: 640 3(RGB) 480
4. Display mode: Normally white. Transmissive
5. Dot pitch: 0.0529(W)*0.1587(H)mm
6. Active area: 101.568(W)* 76.176(H) mm
7. Module size: 117.56(W) 88.43(H) 5.7(D) mm
8. Surface treatment: Anti-Glare
9. Color arrangement: RGB-stripe
10. Interface: Digital
11. Backlight Power consumption: 1. 2000W (Typ.)
12. Panel Power consumption: 0.193(Typ.)
13. Weight: 175g

Teeth bleaching Specification

• Broad Spectrum: 420nm~472.5nm (Host lamps)
• Light Output power: up to 2000Mw/CM2
• 100-240V, 50/60Hz, 1.2 A for global use
• Weight: 8 Kg
• Max. Working Radius: 50cm
• High Uniformity of light output

Intra-oral camera Specification

1. 1/4 CMOS 1.3 MP
2. Video or USB output
3. High resolution, High sensitivity, High performance
4. Reliable light source with 6 pieces of white light LED
5. Compact Size, Easy to use and focus
6. 2 or 3 buttons control, can control previous picture, next picture, and delete pictures from the cameras directly 7. 2 capture angles, display the clear images
7. Built in protection voltage
8. Camera with 512mb Micro TF card inside it, it can save more than 500 pictures.

Teeth bleaching operation

Front

Remote control

• https://www.alandental.com

Reverse:

Turn on the teeth Whitening Accelerator:

• plug in the teeth-whitening Accelerator
• Turn on the power switch.

Warning: When overload, the built-in fuse blows, the teeth whitening accelerator will power off, after changing the fuse, the teeth whitening accelerator will be in normal operating condition.

Operating the Teeth whitening Accelerator:

• Start/ Stop Button: Turn on /off the light by pressing the “STOP/START “button.
• Pause button: Stop the time counting and emitting light by pressing the “Pause” button, the remaining whitening time will sparkle on the digital indicator. Press the “Pause” button again, light will emit and time will count continually.
• UP/Down Button: Use the “UP” or “Down” button to set the whitening time. 5-minute counting with memory, the longest whitening time is 30 minutes each cycle

Intraoral camera operation

The right side

1. Press option 1 to power on the camera; press option 2 for a longer time, to power off the camera
2. Press option 1, to freeze the image; press option 2, to save the image to SD card.
3. Press option 3, check the previous image
4. Press option 4, check the next image
5. Delete the image
6. M-99 small screen is an optional part

The back side

1. Press option 1, Power on the camera; press option 2 for a longer time, and power off the camera
2. Press option 1, to freeze the image; press option 2, to save the image to SD card.

Side

Wired operation sketch map

• Let the MINI SD card insert into the camera

Notice: Please let the back of SD card insert into the camera.

D, Let another side connect with this machine

E. Use the camera
Press the Freeze button, the camera will be powered on, After capturing the image, press the Save button, the images will be saved onto a Micro SD card, press the previous and next buttons, and customers can check the images that have been captured by the camera, Micro SD card can save 500 pictures. Press the switch button, LCD monitor will display the image between the X-ray reader and the intra-oral camera. Press button 1 or 2 on the camera, and customers can check the captured images anytime. Press button 3, the image will be deleted.

F, Upgrade to wireless system
Connect the intra-oral camera with the wireless transmitter and insert the wireless receiver as below picture.

Same as the wired camera’s operation, press the Freeze button and the camera will be powered on, after capturing the image, press the save button, the images can be saved in the SD card, and press the previous and next buttons, customers can check the images what had been captured by camera.

Assembly Instruction illustration

Warning: When this screw is loose, the spring will come out!

How to solve troubles

If there are some troubles of products, Please see below special case below first. If still can’t be solved, please contact your local dealer.

1

| the products can’t be startup when open (ON/OFF)switch)| 1. check the power socket    if    it is ok

2. check the cable if it is connected

2

|

computer or TV can’t reveal images

| 1. check the connection between products and the computer or TV if it is correct

2. check the Driver Setup if it is finished,

3

|

in the process of use, the image will be a little blurry

| If you use it for the first time, it belongs to a natural reaction. It will be better later on

4

|

freezing images then appears dithering

| the handshakes when using the camera to capture images, when users are skillful in using products, the phenomena can be changed

5

|

the images of computer or TV have spots

| 1.check the screen if it has spots 2. Check the lens if it has spot

3.if the spot can’t be cleaned, please contact the local dealer

Notice

Prior to installation and start-up of the unit, carefully read the instructions provided herein, As with all technical devices, the proper function and safe operation of this unit depend on the user’s compliance with the safety recommendations presented in these operating instructions.

• CAUTION: It is important to observe the following precautions: Do not shine the light directly onto or toward unprotected gingival or skin.
• CAUTION: Persons with a history of photosensitivity or who are using photosensitizing drugs should not be exposed to light from this unit.
• CAUTION: This equipment is not suitable for use in the presence of flammable anesthetic mixtures with air or nitrous oxide.
• CAUTION: Please do not look into the emitted light by the machine when it is in use or it will hurt your eyes. Please be sure to wear goggles.
• CAUTION: For the bend angle, please do not exceed 90 degrees, or easily break the elbow, it may cause noise in the future.
• https://www.alandental.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>