ALAN Dental Equipment MD950AUW Wireless Intraoral Camera User Guide
- June 1, 2024
- ALAN Dental Equipment
Table of Contents
USER GUIDE
MDI950AUW
2.0 Mega Pixels Wireless USB Intraoral Camera
Inorder to achieve the best use result, please kindly reader user manual carcfully before usage!
Introduction
1.1.Product introduction
Dear customer
Congratulations on the purchase of this wireless intraoral camera. this camera
can be used to both capture and store images in your computer without any
cables. built-in a rechar- geable lithium-lon battery in the launcher, it is
easy to operate.
1.2.Product accessories
1. Handpiece | IPC |
---|---|
2. Launcher | IPC |
3. USB Receiver | IPC |
4. Charger | IPC |
5. Software and driver CD | IPC |
6. Intraoral camera sheath | 50 PCS |
1.3.Product feature
- USB connections, without any cables.
- More compact operation
Operation
2.1.Intraoral camera
2.2.Launch
Charge
2.3.Receiver
- Channel selection button
- The first channel to receive illuminated
- Illuminated second channel receiver
- Illuminated third channel receiver
- Illuminated receive Channel 4
2.4.Sketch map for connecting
Driver installation instructions
Step 1
Insert the CD to the CD-ROM Find the “Setup. exe” file.
Click Next.
Then Click Finish
Step 2
Connect the camera to your computer. When you do, you will receive a momentary
message saying that Windows has detected new hardware.
Software installation instructions
Insert the CD to the CD-ROM.Find the”DentalView.exe” file. Double click it to install the software.:
Click “Finish” complete installation
Software instructions
Please click “Language” to select the language version
Please click “New” to add the patient profile
Note: For registered patients., you can click “Find” to search the patient and double-cick it enter the system. Or click [Edit] to edit or Delete patient’s intormation
Make the camera focus the patient’s teeth. Press the capture button of the camera or click the capture button on the software to take photos. As the below:
How to recod video
Click the “Video” icon to enter the video window.
Make the camera focus the patient’s teeth. Press the capture button of the
camera or click the Video button on the software to recod video.
As the below:
After the
photo/recording is taken, close the photo/recording window. In the lower left
corner of the software, you can see Photo/Video.
Double-click the photo in the lower left corner to enlarge the preview on the righ
Select the pictures or video in the lower left corner, and right-click the mouse to delete or expro it.
Select the picture on the right which we need, and click Print to pint it.
Product specification list
Specification | MDOI50AUW |
---|---|
Power | DC 5V+0.5 (1.5A) |
Signal system | NTSC/PAL(option) |
Pixel of picture | 2.0 Mega pixels |
Lamp | 6pes white LED (5600K) |
Photographing visual angle | 105° |
Accumulation point | 3mm~50mm |
Lead | Length:2.5m connect port:6pinhole |
Battery | 350mA Lithium battery |
(Cold work about 35 mins continuously)
Channel| 4 Channels
Frequency| 5.8GHz
Wireless distance| Over 10 m
Solution of simple hitch
You can operate according to method of hereinafter when t-he product does not work. You can contact with dealer or our company when you cannot solve it.
Item | State of hitch | Solution method |
---|---|---|
1 | Turn on and the host no display | Check power supply socket connection ok or |
not.
2| Computer/TV has no image| 1.Check if main body is connected with co-mputer
or TV correctly.
2.Check if driver program of computer is installed and attribute is set
correctly.
3| The image is slightly fuzzy| 1 It is normal phenomenon of heating itself if
you use it for the first time.
4| The frame is twinkling after freezing| 1.The handset must keep still when
freezing. 2.You can do it again and again if you are Unskilled.
5| The picture of computer/ TV has stain| 1.Check the surface of monitor clear
or not. 2.Check the surface of lens clear or not. You can wipe off the dust by
clean cotton swab. 3.Please contact with us if you cannot solve it by above
method.
Notice
-
Please read carefully notice hereinafter before you use the product, you should stow for later query.
-
Product
» When using this product, please put a camera sheath so as not to scratch the lens or lens blur, or the company shall be not responsible for it.
» Please shutdown then plug the data lines, to ensure the normal use.
» Please close the video window at first, and then close the power when you don’t use the machine, to avoid the computer can’t work.
» Don’t let sharp thing, metal or liquid into or touch signal tie-in in order to protect it.
» Cut off power supply if you don’t use it for a long time.
» Don’t discompose or dismantle any part of the product lest destroy product.
» Don’t compress it. -
Power supply
» You should use appointed special transformer lest destroy product.
» Cut off power supply if you don’t use it for a long time.
» You cannot use line of power supply, plug or socket when it was damaged.
» Don’t compress line of power supply or signal connection line.
» Don’t let line of power supply or signal connection line expose in gangway lest line is trampled.
» Don’t put line of power supply or signal connection line in damp place. -
Surrounding environment
» Put the product in dry and ventilated place.
» Don’t put the product in super-cooling, super-hot, super-damp, direct- irradiation, dusty place.
Important maintenance instructions
- Please use a disposable sheath for every patient, and replace it between patients and operations for best hygiene control.
- Store your camera with a sheath on to protect the leans from dust particulates.
- Do not spray your camera with air, water, or other fluids directly on lens or lights.
- Do not submerge or autoclave.
- Avoid using cleansing products with dichlorocthylene, methylene chloride, trichloroethylene, cetones, or chloride hydrocarbons which can damage plastic.
- For disinfecting, use a mildly damp towel or towelette with a low concentration alcohol bascd cleancr. Wipe the entirety of the camera (Handpiece/Cable) while avoiding contact with the lens or lights.
- Failure to follow these directions can lead to fogging of your lens and lower image quality.
Failure to follow these directions will void your warranty.
Instructions for using sheaths
-
Make the LEDs and lens of the camera facing down and insert the camera under the blue label opening of the sheath.
-
Push the camera into the top of the sheath and keep the sheath close tothe camera.
-
Tear off the top and bottom protective paper from the sheath. The camera s ready for normal use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>