ANKER A2674 Charger 67W Power User Manual
- May 15, 2024
- Anker
Table of Contents
Anker 336 Charger
(67W)
USER MANUAL
Attention
****Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
****For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 79733
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2674 is in
compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC &
2019/1782/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.anker.com
Hereby, Anker Innovations Limited declares that the product type A2674 is in
compliance with Electrical Equipment (Safety)
Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related
Products Regulations 2010. The full text of the GB declaration of conformity
is available at the following internet address: https://www.anker.com.
Indoor use only
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK
matters)
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich,
Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom
Specifications
| Input | 100V-240V~50/60Hz 1.8A |
|---|---|
| Output | Use One Port, Output |
USB-C1/C2: 5V 3A/9V 3A/12V 3A/15V 3A/20V 3.35A (67W Max)
USB-A: 4.5V 5A/5V 4.5A/5V 3A/9V 2A/12V 1.5A (22.5W Max)
Use Two Ports, Output
USB-C1+USB-C2: 67W Max
USB-C1+USB-A: 67W Max
USB-C2+USB-A: 24W Max
Use Three Ports, Output
USB-C1+USB-C2+USB-A: 66W Max
Total Output: 67W Max
PPS| Support PPS
Average active efficiency| 84.13%
Efficiency at low load (10%)| 69.51%
No-load power consumption| 0.203W
Operating temperature| 0-25℃ / 32-77 ℉
Note: To ensure electrical safety and product performance, the output
power may fluctuate based on the ActiveShield™ 2.0 safety mechanism when the
ambient temperature is between 2635°C (78.8-95°F) with a high output load.
ActiveShield™ 2.0 enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.
Customer Service
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
18-month limited warranty *
Lifetime technical support
[email protected]
[email protected] (For Middle East and
Africa Only)
(US/CA) +1 (800) 988 7973
(UK) +44 (0) 1604 936200
For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com Or scan the QR code below: