ALAN Dental Equipment MD885L LED Teeth Whitening Lamp User Manual

ALAN Dental Equipment MD885L LED Teeth Whitening Lamp

Product Information

• Product Name: Tray and Tray Mat
• Quantity: 1 Tray, 1 Tray Mat
• Language: English

Product Usage Instructions

Tray Assembly

1. Place the tray on a flat surface.
2. Insert the tray mat into the tray.
3. The mat is designed for cleaning purposes, use it to wipe any spills or dirt off the tray surface.

Frequently Asked Questions (FAQ)

• Q: How do I clean the tray and tray mat?
  A: The tray can be wiped with a damp cloth. The tray mat can be hand-washed with mild soap and water and then air-dried.

• Q: Can the tray be used in the microwave?
  A: It is not recommended to use the tray in the microwave as it may cause damage to the product.

To reach a better result, please read this instruction before use.

Safety

Note:
Before installing and starting the unit, please read the instructions carefully. Please note the following safety use recommended in the instructions.

• Caution: It is important to observe the following precautions and procedures.
• Caution: Please do not use this device to expose to persons who have a history of Photosensitivity or photosensitizing drugs.
• Caution: This equipment is not suitable for use in the presence of flammable anesthetic Mixtures with air or nitrous oxide.
• Caution: Please do not look at the light directly, remember to wear a goggle when it is in use, or it will hurt your eyes.
• Caution: Please release the locking nut and handwheel when you adjust the position of the machine, and then readjust, or it will influence the life of the machine.

Application

MD885L is a cooling light device that can emit a specific wavelength, the light irradiates a special whitening agent which is applied on the surface of the teeth so that teeth become whitened.

Installation Instruction

1. Twist the wheels to the feet, and twist tightly with a wrench
2. Fix 5 feet onto the settled seat.
3. Put the 5 irons into the foot base
4. Note: A Phillips screwdriver is needed for this step. Place base plate on bottom of pole base with all feet installed. Secure with supplied screws and tighten snugly.
5. Tighten the two cable hooks to the post.
6. Put pole 1 with a decorative set placed on the settled seat and support with a hand.
7. Turn over the feet and fix the settled seat and pole with a long screw. (if the screw hasn’t twisted tightly, the pole will shake)
8. Please release the nut first if you need to adjust the machine position or angle. Otherwise, it will damage the machine or affect the machine’s use life.
9. Put the tray on the column tube, install it, and then twist the nut.
10. Put pole 2 into pole 1 and twist the fixed iron pipe.

Product Structure

Please release the nut first if you need to adjust the machine’s position or angle, or it will affect the machine’s use life.

Host Back instruction

Accessories

Product Feature

• High-efficiency wall conjoined sliding structural design, adjust angle freely and convenient to use.
• A multi-functional high-sensitivity 5-inch touch electronic display, easy operation
• Four light source output selections: blue, red, blue + red + purple, blue + purple
• Three-stage power output selection, users can select a different power according to the patient’s condition
• The user can select the needed time according to the desired treatment, and time adjustment ranges from 1 to 30 minutes
• Work time counting function comes with an electronic lock, work time can be cleared by that lock for the user.
• In the case of not working, the machine will go to sleep automatically after 60 seconds
• Enclosed disposable sheath, prevents cross-infection, is clean and convenient, and lets the patient feel relieved.

Specification

• Broad Spectrum: 450nm~510m (Blue Light) &620nm~640nm(Red Light) 380nm~420nm(Purple Light)
• Voltage: AC: 100V~240V
• Light source: 4~5W/pc(Blue Light) ; 2~3W/pc(Red Light);1W/pc(Purple Light).
• Gross Weight: 5kgs.
• Total Arm Length: 90cm.
• Total Height: 120cm.

Operation Instruction

1. Turn on the Teeth Whitening Machine power
   • A. Plug into the power cord.
   • B. Turn On the whitening machine power switch.
2. Head Introduction
   • Contain five high-power Blue LEDs, two Red LEDs, and 8 Purple LEDs.
3. Power On Screen instruction
4. Main Screen Function Instruction
5. Power Setting Instruction(Set brightness for light output)
6. Time Setting Instruction
7. Mode Setting Instruction
8. Screen Brightness Setting Instruction

Sound Warning

• After starting, the machine will beep each minute.
• You will hear three beeps after the finish.

Cooling Setting

• To guarantee all LEDs could work at normal temperature during the whitening process, we fixed a high efficiency and quiet fan to expel heat.
• Built-in smart temperature protection, when it meets high temperature will shut down power automatically, after cooling, everything works properly.

Liability

• Assembly, stretching, readjustment, modification, and repair are performed by our company-authorized person.
• Please follow the electrical products installation requirements.
• Please follow the instructions to use this equipment.

https://www.alandental.com.

References

• Dental Instruments Australia |Dental Equipment Supplies For Sale - Alandental.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>