BITMAIN AntMiner S9 Included Power Supply Owner’s Manual

BITMAIN AntMiner S9 Included Power Supply Owner’s Manual

Specification

Power supply
Power supply AC input voltage, Volt (2-1)| 200~240V AC
Power supply AC Input Frequency Range, Hz| 50~60
Power supply AC Input current, Amp (2-2)| 20
Adapted AC output power requirement, W (2-3)| 4000
Hardware Configuration
Network connection mode| RJ45 Ethernet 10/100M
Server size (LengthWidthHeight, w/o package), mm| 400195290
Server size (LengthWidthHeight, with package), mm| 570316430
Net weight, kg| 14.6
Gross weight, kg| 16.4
Noise, dBA @25℃ (2- 4)| 72
Environment Requirements
Operation temperature, ℃| 0~45
Storage temperature, ℃| -20~70
Operation humidity, RH| 10%~90%
Operation altitude, m (2-5)| ≤2000

Notes:

1. The Hash rate value, Power on wall, and Power efficiency on wall are all typical values, the actual Hash rate value fluctuates by ±3%, and the actual Power on wall and Power efficiency on wall fluctuate by ±5%.
2. Inlet air temperature.
3. Caution: Wrong input voltage may probably cause server damaged.
4. Two AC input wires, 10A per wire.
5. Caution: It is strongly recommended that the power on wall of the miner does not exceed this value.
6. Max condition: Fan is under max RPM(rotation per minute).
7. When the server is used at an altitude from 900m to 2000m, the highest operating temperature decreases by 1°C for every increase of 300m.

Working Mode

Notes:

1. MEN: Normal Energy Mode
2. HEM: High Energy Mode

Performance Curves

1. Hash rate vs. Ambient Temperature
   

2. J/T vs. Ambient Temperature
   
   

References

• BITMAIN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>