VEVOR GM51077 Raised Garden Bed User Manual
- June 22, 2024
- VEVOR
Table of Contents
VEVOR GM51077 Raised Garden Bed
Specifications
- Model: GM51077
- Contour Feature: Elevated Type
- Material: Steel(0.8mm+1.5mm)
- Colour: Black
- Product Size: L108xW49.5xH80cm
- Bottom Floor Capacity: 45kg
Product Usage Instructions
Notes
- The work may have burrs that injure the hands, please wear gloves before installation.
- Check whether the parts are complete before installation.
Assembly
| Part No. | Name | Qty |
|---|
Assemble the parts as shown below:
- Step 1: Install the foot, side plate, and push rod mounting pieces.
- Step 2 : Install the foot, hook, side plate, and axle of the other end.
- Step 3 : Install long side panels.
- Step 4: Install the push rod and bottom frame.
- Step 5: Install wheels and plastic foot pads.
- Step 6: Put the inner bottom plate into the frame, and put the supporting net at the bottom.
FAQ
- Q: What should I do if I encounter missing parts during assembly?
- A: If you find any parts missing, please contact our technical support for assistance. You can reach us at www.vevor.com/support.
- Q: Can the raised garden bed be disassembled for storage?
- A : Yes, you can disassemble the garden bed for storage by following the reverse steps of the assembly instructions.
NOTES
- The work may have burrs that injure the hands, please wear gloves before installation.
- Check whether the parts are complete before installation.
MODEL AND PARAMETERS
| Model | GM51077 |
|---|---|
| Contour Feature | Elevated Type |
| Material | Steel(0.8mm+1.5mm) |
| Color | Black |
| Product Size | L108xW49.5xH80cm |
| Bottom floor capacity | 45kg |
ASSEMBLY
Assemble
the parts as shown below
INSTALLATION INSTRUCTION
- Step1: Install the foot, side plate, and push rod mounting pieces
- Step 2 : Install the foot, hook, side plate, and axle of the other end.
- Step3: Install long side panels
- Step4: Install the push rod and bottom frame
- Step5: Install wheels and plastic foot pads
- Step 6: Put the inner bottom plate into the frame, and put the supporting net at the bottom.
We continue to be committed to providing you with tools at a competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
- Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
- Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD
- Imported to the USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place,
- shanghai 200000 CN.
- NSW 2122 Australia
- Rancho Cucamonga, CA 91730
E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House,
London Road, Staines-upon-Thames, Surrey, TW18 4AX
CONTACT
- www.vevor.com/support
- Technical Support and E-Warranty Certificate
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.