Tzumi Sound Mates Manual
- June 16, 2024
- Tzumi
Table of Contents
Tzumi Sound Mates
TRUE WIRELESS EARBUDS
TWE paring
- Keep the distance between the device and the Bluetooth Earbuds within 3 feet(for pairing only)
- Press and hold the multi-function button on both earbuds for a few seconds until you hear prompt “ Power on”, and see blue lights flashing.
- You will hear prompt ”Left Channel” on Left Earbud and “ Right Channel” on Right Earbud to begin pairing.
Connect TWE to your device
Active the Bluetooth function on your device to search for “E41” and connect
to it. You will hear ” Phone paired” from the Master Earbud(Right Earbud-
Factory default setting), and blue lights flashing. It is ready for use.
N OTE:
Factory default setting is RIGHT Earbud as MASTER Earbud. To reset/change
MASTER Earbud, hold multi-function button on BOTH earbuds for 6 seconds. When
blue/red lights flash quickly, press multi-function button twice on the earbud
you want to set as the MASTER Earbud.
POWER OFF
Option 1: Long press the Multi-function button for about 4 seconds, hear
”Power off”, the both earbuds will turn off.
Option 2: Put earbuds into charging case and it will be charged automatically.
Both earbuds will turn off during charging.
HANDS FREE FUNCTION
Short press the multi-function button to answer an incoming call / end an
ongoing call;
Long press the multi-function button to refuse an incoming call Double press
the multi-function button to call the number that last called you
REMARK: the operation only support master earpiece.
SINGEL EARBUD PAIRING
- Press and hold the multi-function button for about 6 seconds, until you hear “ Power on” then “Pairing”, the blue/red lights flash quickly. (the other Earbud should be off during this process.)
- Active the Bluetooth function on your device to search the “E41” and connect to it.
- You will hear prompt” Phone paired” and blue lights flashing. It is ready for use.
Remark: If no device is connected within 5 minutes after power on,
the Earbuds will automatically turn off to save power. After successful pairing, device will remember each other, it will be paired automatically next time.
CHARGING THE BLUETOOTH EARBUDS
Please fully charge before first use
To charge your earbuds: simply return them to the charging station, close the
lid. They will charge automatically and the LED light will turn solid blue
while charging. The LED light will turn off when charge is complete.
Charging time: around 1-1.5 hours
Play time: 2.5hours
CHARGE YOUR CHARGING STATION
Plug the provided micro USB charging cable into the bottom of the charging
station. The LED light will turn solid red while charging. It will die out
after full charged.
Charging time: 2 hours
PRODUCT’S SPECIFICATIONS
Bluetooth version: 4.2
Power output: 10mW
Speakers: D13mm 2 Frequency response: 20HZ-20KHZ Battery build-in
earpiece: 45mAh 2
Charging Station battery: 500mAh
Charging current: 50mA DC 5V
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may
cause undesired operation.
Questions about your Manual ? Post in the comments!