Fiilex P180S On Camera Light User Manual

: June 15, 2024
: Fiilex

Table of Contents

Fiilex P180S On Camera Light
Product Usage Instructions
FAQ
Basic Operation
Parts Diagram
Compatible Accessories
Specifications
Warranty
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fiilex P180S On Camera Light

Product Usage Instructions

Attach Light Stand Adapter (7) to a baby/junior stand with a combo pin.
Insert the DC connector into the DC Power Input Jack (11).
Slide the Barndoor (1) into the Barndoor Bracket (2) until it clicks into place.
Press the On/Off Button (10) to turn on the light. The button will turn green to indicate that the light is on.
Turn the Light Intensity Knob (8) to adjust the brightness of the fixture.
Turn the CCT Tuning Knob (9) to adjust the color temperature of the fixture.

FAQ

Q: What should I do if the light does not turn on?
A: Check the power source and ensure that the DC connector is securely plugged into the DC Power Input Jack.
Q: How do I clean the fixture?
A: Use a soft, dry cloth to gently wipe the surface of the fixture. Avoid using any harsh chemicals or abrasive materials.

General Notes

Please read the following operating instructions very carefully before using this fixture for the first time. They contain important information on the operation of Fiilex lighting equipment.
For your safety, please follow all safety instructions and warnings.
Please also follow the operating instructions of the light and power adapter manufacturers.
Keep these operating instructions for you and subsequent users for reference in the future.
For further information, please ask your retailer or inquire at your local authorities. Only use Fiilex spare parts and accessories (www.fillex.com).

Basic Operation

Basic Operation (refer to Parts Diagram on the following page)

Mounting
The Light Stand Adapter (7) on the P180S can be mounted to a baby / junior stand with a combo pin.
Powering On
Insert the DC connector into the DC Power Input Jack (11) and place the DC plug into an active wall socket. The fixture’s On/Off Button (10) will turn on once it is receiving power. The On/Off Button (10) toggles the output on and off.
Adjusting the P180S
Use the Yoke Knobs (5) to lock the fixture’s tilt position. Tighten the handle to secure it.

Mode	Screen Indicator	Description
Intensity	INT	To adjust the brightness of the fixture, turn the Light

Intensity Knob (8).
Color Temperature| CCT| To adjust the color temperature of the fixture, turn the CCT Tuning Knob (9).

Parts Diagram

4-Leaf Barndoor
Barndoor Brackets
Barndoor Fix Ball
Air Vents
Yoke Knob
Yoke
Light Stand Adapter
Light Intensity Knob
CCT Tuning Knob
On/Off Button
DC Power Input Jack

Fiilex-P180S-On-Camera-Light-FIG-1

Mounting

Attach the Light Stand Adapter (7) on the light to a baby / junior stand with a combo pin.

Plugging In

Insert the DC connector into the DC Power Input Jack (11).

Installing the Barndoor

Slide the Barndoor (1) into the Barndoor Bracket (2) until it clicks into place.

Powering On

Press the On/Off Button (10) to turn on the light. The button will turn green to indicate that the light is on.

Adjusting the Settings

Turn the knobs to adjust CCT/Intensity.

Compatible Accessories

Fiilex-P180S-On-Camera-Light-FIG-7

Specifications

CCT Range	2800-6500K Continuous Tuning
Light Engine	Dense Matrix LED
Power Draw	40W Max
DC Input	12 – 24V DC (32W DC Max)
AC Input	100 – 240V AC, 50 ~ 60Hz (in) / 19V DC, 65W Max (out)
Power Port	2.5mm DC Jack
DMX Ports	N/A
Weight	1.2lbs / 0.5kg
Size	Dia 2.9” x L 3.8“ x H 6.2” / Dia 7.4cm x L 9.6cm x H 15.7cm
Mount	Baby Stud 5/8” Female (16mm)
Thermal Design	Advanced Vapor Cooling System (Fan Cool)
Operating Temperature	32 – 104ºF / 0 – 40ºC
IP Rating	IP-24 (Dust & Water Resistant)
LED Lifetime	42,000 hours
Certifications	FCC, CE, UL

Safety

Do NOT attempt to disassemble the body of the P180S, doing so will immediately void the factory warranty.
Do NOT directly cover the side and/or back air vents. Allow for proper airflow.
Only use the included power supply or optional D-Tap Cable. Failure to do so may cause damage to the LED light.
Only use the included power adapter, failure to do so may cause damage to the LED light.
Only use a soft, dry towel to gently clean the exterior of the light.
Before using the light for the first time, remove the protective membranes.

Warranty

Unless otherwise stated, your product is covered by a one-year part and labor- limited warranty. Fiilex guarantees, to the original buyer, that this product is to be free of defects in both workmanship and material for one year from the date of shipment. This warranty extends to all products that have proved defective through normal use but excludes products that have been disassembled, modified, or misused by the buyer or any other person. This warranty is in place of all other warranties and disclaims all warranties expressed or implied, including any warranty of merchantability, fitness for a particular purpose, or arising from the course of dealing between the parties or usage of trade.
Returning an Item Under Warranty for Repair
It is necessary to obtain a Return Authorization Number (RA#) from your dealer/ point of purchase BEFORE any units are returned for repair. Fiilex will make the final determination as to whether or not the unit is covered by warranty. Fiilex will replace or repair to proper working condition any products that are returned under warranty. Products repaired or replaced under warranty are under warranty only for the remaining unexpired time of the original warranty.
Any Product unit or part returned to Fiilex must be packaged properly to ensure the protection of such Product unit or parts. The package must be clearly and prominently marked to indicate that the package contains returned product units or parts with a Return Authorization (RA#) number. All returned product units or parts must be accompanied by a written explanation of the alleged problem or malfunction.