Lakeland 27348 Milk Frother and Hot Chocolate Maker Instruction Manual

June 11, 2024
LAKELAND

Lakeland 27348 Milk Frother and Hot Chocolate Maker

LAKELAND MILK FROTHER AND HOT CHOCOLATE MAKER

Thank you for choosing the Lakeland Milk Frother and Hot Chocolate Maker.
Please take a little time to read this booklet before you use your appliance and keep it in a safe place for future reference.

The frother warms and froths hot milk to create perfect lattes, cappuccinos and cafestyle hot chocolates. It also froths cold milk for iced coffees, milkshakes and smoothies. Just pour in your milk and pop on the lid and switch on. In next to no time you’ll have enough thick, creamy froth or hot milk for two luxurious drinks. The whisk rotates gently to evenly distribute heat and prevent milk from burning, and can be completely removed for easy cleaning to prevent a build-up of burnt on milk.

Here at Lakeland, our award-winning family-owned business still offers the same excellent quality, value for money and exceptional customer service as when we founded the company back in the 7 960s.

Our products are hand-picked and thoroughly tested so you can be sure that everything you purchase will be a pleasure to use for many years to come.

PRODUCT FEATURES

  1. Lid
  2. Steam vent
  3. Silicone ring
  4. Whisk holder and whisk
  5. Jug
  6. Handle
  7. Control panel
  8. Plug connector
  9. Cord and plug

SAFETY PRECAUTIONS

Carefully read all the instructions before using the appliance and keep in a safe place for future reference. Always follow these safety precautions when using the appliance to avoid personal injury or damage to the appliance. This appliance should be used only as described in this instruction book.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised.
  • Make sure your electricity supply matches the voltage shown on the appliance.
  • Ensure all packaging materials and any promotional labels or stickers are removed from the appliance before the first use.
  • Always inspect the appliance before use for noticeable signs of damage. Do not use if damaged or has been dropped. In the event of damage, or if the appliance develops a fault contact the Lakeland customer care team on 015394 88100 or [email protected]
  • Do not use this appliance if the lead is damaged. Contact the Lakeland customer care team on 015394 88100 or [email protected]
  • Always use the appliance on a flat, dry, level, heat resistant surface. If the surface is sensitive, place a heat-resistant board under the appliance.
  • Unplug from the mains when not in use and before cleaning. To disconnect, turn the socket to “off” and remove the plug from the mains socket.
  • Do not use any accessories or attachments with this appliance other than those recommended by Lakeland.
  • To protect against fire, electric shock or personal injury, do not immerse cord, plug or appliance in water or other liquids.
  • Do not leave the lead hanging over the edge of a kitchen table or worktop.
  • Avoid contact between the lead and hot surfaces.
  • For indoor use only.
  • For domestic use only.
  • This appliance should be used for preparation of drinks as described within the instructions for use that accompany it.
  • Always ensure that your hands are dry before removing the plug from the mains socket. Never pull the plug out of the mains socket by its lead.
  • Not recommended to be used with a plug-in timer switch.
  • Do not connect this appliance to an external timer or remote control system.
  • An extension cable may be used with care. The electrical rating of the cable should be at least as great as the appliance. Do not allow the cable to hang over the edge of the worktop or touch any hot surfaces .
  • WARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure the cut off plug is disposed of safely.
  • CAUTION: The plastic bags used to wrap this appliance or the packaging may be dangerous. To avoid risk of suffocation, keep these bags out of reach of W babies and children. These bags are not toys.
  • Keep the frother, including its plug and lead away from hot ovens, electric and gas burners, flames and hot surfaces.
  • DO NOT touch any moving parts whilst in use. Always switch off and unplug the appliance and wait until the whisk has stopped rotating before you open the lid.
  • Surfaces may be hot when the frother is in use or just used. Use the handle and take care when removing the lid.
  • Milk will remain hot for a considerable time after heating and is a scalding hazard.
  • Ensure the lid is fully closed before switching on. DO NOT open the lid when milk is heating, scalding may occur if the lid is lifted .
  • WARNING: Never touch the live parts on the plug connector unit. Always make sure the appliance is switched off at the socket, until in use.
  • Keep hands away from the steam vent when milk is heating, steam is hot.
  • The frother must be filled to at least the ‘MIN’ mark inside before it is switched on.
  • DO NOT fill beyond the ‘MAX MILK’ or ‘MAX FROTH’ level.
  • DO NOT lift or move the frother while in use.
  • Switch off at the socket and unplug the plug connector before pouring, pour slowly and do not over-tilt the frother.
  • DO NOT leave the frother unattended while it is frothing milk.
  • DO NOT use metal spoons or other utensils with sharp edges to spoon milk or froth from the appliance. These will scratch the coating inside. Pour only.
  • Only heat milk in the frother, do not heat any other liquids, apart from the first use.
  • DO NOT operate empty.

WARNING: – HOT SURFACES

The lid and jug and surfaces marked with this symbol will get very hot during use.

DO NOT TOUCH as possible injury could occur.

Wear oven gloves when removing the lid, from the jug. Allow the appliance to cool completely before touching these surfaces, handling, moving or storing this appliance.

Be careful when removing the lid.

Remove the lid slowly with the opening facing away from you.

Be careful as hot steam will escape and can cause scalding and burns.

USING YOUR FROTH ER FOR THE FIRST TIME

DO NOT insert the plug into an electrical socket, or turn on the frother before you have fully assembled it.

  1. Unpack the frother, remove all the packaging materials.

  2. Before first use, wipe the jug with a clean damp cloth.

  3. Wash the lid, silicone ring, whisk and whisk holder in warm soapy water, rinse and dry.

  4. Place the frother on a flat, dry, level, heat resistant surface. If the surface is sensitive, place a heat-resistant board under the appliance.

  5. Insert the whisk holder and whisk inside the jug. The whisk magnet will click into place once the whisk holder is located over the spindle.

  6. Plug in at the socket and attach the plug connector.

  7. Fill it with tap water to the ‘MAX FROTH’ level inside the jug, place on the lid. Switch the appliance on at the socket, there will be a beep sound and all the lights on the control panel will illuminate once and go out.

  8. Press the control panel button once in the middle and the hot milk frothing icon will illumination red, the whisk will start to rotate.

  9. The appliance will beep and the icon will flash 4 times and then go out. The whisk will automatically stop when the water is warm.

  10. Discard the warm water, the appliance is now ready to use.

  11. Each time you press the control panel button there will be an audible beep.

FOR FROTHING MILK
You need to use the whisk holder and whisk.

FOR HEATING MILK
You only need to use the whisk holder. To remove the whisk place your thumbs on the whisk to click off.

INSTRUCTIONS FOR USE

WHISKS| FUNCTIONS| BUTTON| MAX CAPACITIES| COMPLETION TIME IN SECONDS
---|---|---|---|---
| Hot Milk Frothing| | 220ml| 100-240
Cold Milk Frothing| | 220ml| 112-126
| Hot Milk| | 450ml| 135-400
Hot Chocolate| | 450ml| 200-500

TO MAKE HOT MILK FROTH

You can froth 220ml of hot milk in less than 4 minutes.

  1. Plug in the frother, add the required amount of milk, place the lid on top and switch it on at the socket.

  2. Make sure the frother is filled to at least the ‘MIN’ mark and no further than the ‘MAX FROTH’ mark inside the jug, or the frother will burn dry or overflow through the lid.

  3. Press the control panel button just once in the middle and the hot milk frothing icon will illuminate red, the whisk will start to rotate.

  4. The appliance will beep and the icon will fiash 4 times and then go out. The whisk will automatically stop when your frothed milk is ready.

  5. If you wish to stop the appliance at anytime, press the control panel button once and the frother will automatically turn off and there will be no icons illuminated.

TO MAKE HOT MILK

You can heat 450ml of hot milk in less than 6 minutes.

  1. Plug in the frother, add the required amount of milk, place the lid on top and switch it on at the socket.
  2. Make sure the frother is filled to at least the ‘MIN’ mark, and no further than the ‘MAX MILK’ mark inside the jug, or the motor will burn dry or over flow through the lid.
  3. Press the control panel button twice in the middle and the hot milk icon will illuminate red, the whisk will start to rotate.
  4. The appliance will beep and the icon will flash 4 times and then go out. The whisk will automatically stop when your frothed milk is ready.
  5. If you wish to stop the appliance at anytime, press the control panel button once and the frother will automatically turn off and there will be no icons illuminated.

TO MAKE HOT CHOCOLATE

You can heat 450ml of hot milk in less than 8 minutes.

  1. Plug in the frother, add the required amount of milk, place the lid on top and switch it on at the socket.
  2. Make sure the frother is filled to at least the ‘MIN’ mark, and no further than the ‘MAX MILK’ mark inside the jug, or the motor will burn dry or over flow through the lid.
  3. Press the control panel button 3 times in the middle and the hot chocolate icon will illuminate red, the whisk will start to rotate.
  4. The appliance will beep and the icon will flash 4 times and then go out. The whisk will automatically stop when your frothed milk is ready.
  5. If you wish to stop the appliance at anytime, press the control panel button once and the frother will automatically turn off and there will be no icons illuminated.

TO MAKE COLD MILK FROTH

You can froth 220ml of cold milk in 2 minutes.

  1. Plug in the frother, add the required amount of milk, place the lid on top.
  2. Make sure the frother is filled to at least the ‘MIN’ mark, and no further than the ‘MAX FROTH’ mark inside the jug, or the motor will burn dry or over flow through the lid.
  3. Press the control panel button 4 times in the middle and the cold milk frothing icon will illuminate blue, the whisk will start to rotate.
  4. The appliance will beep and the icon will flash 4 times and then go out. The whisk will automatically stop when your frothed milk is ready.
  5. If you wish to stop the appliance at anytime, press the control panel button once and the frother will automatically turn off and there will be no icons illuminated .

WARNING

  • Ensure the lid is fully closed before switching on.
  • DO NOT open the lid when milk is heating, scalding may occur if the lid is lifted.
  • DO NOT touch any moving parts whilst in use. Always switch off the appliance and wait until the whisk has stopped rotating before you open the lid.
  • Remove the frother from the plug connector to fill or pour. Pour slowly and do not over-tilt the frother.

A GUIDE TO INGREDIENTS

  • Different milks, for example UHT long life, fresh semi-skimmed milk and whole milk will all froth to different levels so you may need to reduce the amount of milk you use.
  • The frother works well with several non-dairy milks such as almond, oat and soya milk.
  • Whole milk often gives the best results for frothing.
  • You can use the recipes below as a guide, alternatively use the frother to make hot milk and then add to coffee/drinking chocolate in your mug and stir. Add your favourite topping and enjoy!

RECIPES

FROTHED MILK – USING THE WHISK HOLDER AND WHISK

CAPPUCCINO
7 /3 espresso.
Add 2/3 frothed milk.
Top with cocoa powder.

LATTE MACCHIATO
Pour frothed milk in a tall glass.
Add espresso carefully down the inside edge of the glass.

INSTANT FROTHY COFFEE
Make instant coffee.
Add frothed milk.

HOT MILK AND HOT CHOCOLATE – USING THE WHISK HOLDER

CAFFELATTE
7 /3 espresso.
Add 2/3 hot milk and stir.

HOT CHOCOLATE
Heat milk with hot chocolate flakes or powder. Pour into mug and add marshmallows.

INSTANT MILKY COFFEE
Place instant coffee granules in a mug.
Add hot milk and stir to mix.

HINTS AND TIPS

  • Only heat milk in the frother.
  • The frother can be used with milk and hot chocolate, pour the milk into the frother first, then add the flakes. Use the hot chocolate setting.
  • Certain types of milk, for example long life, can froth more than others, so your milk may leak out – reduce the amount of this milk next time you heat it.
  • To remove hot or cold frothed milk from the jug, use a non-metal utensil, to avoid scratching, the non-stick coating, inside the jug.
  • If you are making two or three frothy drinks at once, make one amount of hot milk using just the whisk holder and divide between the mugs. Then add the whisk and make one amount of frothy milk and divide that between the mugs.
  • After frothing or heating allow 2 minutes for the thermostat to reset, to shorten this time, rinse with water and wipe dry after each use.
  • Cold milk can be frothed with this frother, however this doesn’t cool down the milk.
  • The frother works at normal temperature in this condition.
  • Rinse the jug as soon as you have finished using it and it will be easier to clean.
  • Keep the whisk in a safe place. It is small and can easily be lost.
  • For best results, the milk should be 5-10°C before using in the frother.

FREQUENTLY ASKED QUESTIONS

Question: Why is milk and froth spilling out through the lid?
Answer: Too much milk has been put into the jug. Make sure milk is below the maximum fill lines and you are using the correct whisk.
Question: Why won’t the jug switch on?
Answer: Check the jug is connected to the power cable, plugged in and switched on at the socket.

CARE AND CLEANING

  • Switch off at the socket and unplug the plug connector unit and allow the frother to cool completely before cleaning.
  • Clean thoroughly before using for the first time and after every use.
  • Check the parts for wear or damage after every few uses.
  • DO NOT use abrasive cleaners, or steel wool.
  • Never immerse the plug connector unit or jug in water or any other liquid.
  • Rinse the inside of the jug with hot soapy water, rinse with clean water and dry thoroughly.
  • DO NOT use hard or sharp objects to clean inside the jug, this will damage the non-stick coating.
  • To clean the whisk and holder, push the whisk off the holder.
  • Clean the lid, silicone ring, whisk and holder with warm soapy water, rinse and dry thoroughly.
  • DO NOT put any parts of the frother in the dishwasher.
  • DO NOT use metal spoons or other utensils with sharp edges to spoon milk or froth from the appliance. These will scratch the coating inside. Pour only.
  • Store the frother with the power cable removed. Never wrap it tightly around the appliance.

TECHNICAL INFORMATION

  • Power: 400W.
  • Voltage: 7 20V.~
  • Frequency: 60Hz.
  • Flex length approx. 65cm. (25½”).

ELECTRICAL CONNECTIONS

THIS APPLIANCE MUST BE EARTHED

This appliance is fitted with a fused three-pin plug to BS1363 which is suitable for use in all homes fitted with sockets to current specifications.

CHANGING THE 16 AMP FUSE

Use a 16 amp BS1362 fuse. Only BSI or ASTA approved fuses should be used. If you are unsure which plug or fuse to use, always refer to a qualified electrician.

Note: After replacing or changing a fuse on a moulded plug which has a fuse cover, the cover must be refitted to the plug; the appliance must not be used without a fuse cover.
If lost, replacement fuse covers can be obtained from an electrical shop.

RECYCLING YOUR ELECTRICALS

The Waste Electrical and Electronic Equipment (WEEE) Directive requires
UK distributors to maximise separate collection and environmentally friendly processing of WEEE.
UK distributors (including retailers) are required to provide a system which allows all customers buying new electrical equipment the opportunity to recycle their old items free of charge.
As a responsible retailer, we have met these requirements by offering all customers buying new electrical and electronic equipment free take-back of their old electricals on a like-for-like basis.

CUSTOMERS SUPPORT

Lakeland
Alexandra Buildings, Windermere, Cumbria, UK LA23 1 BQ
Tel: +44(0)15394 88100 www.lakeland.co.uk.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LAKELAND User Manuals

Related Manuals