next level MOZA R5 SIM Racing Simulator Instruction Manual
- June 11, 2024
- next level
Table of Contents
next level MOZA R5 SIM Racing Simulator
Product Specifications
-
Brand: Next Level Racing
-
Product Type: Sim Racing Cockpit
-
Compatibility: Various wheel, pedal, and
handbrake models -
Materials: Steel frame, acrylic panel
Product Usage Instructions
Assembly Instructions
- Identify all the components listed in the manual.
- Follow the step-by-step assembly guide provided.
- Use the included tools for assembly.
- Ensure all bolts are securely fastened..
Warnings
Ensure that small parts are kept away from children under 3 years old. Do not
ingest any parts of the product.
Frequently Asked Questions (FAQ)
Q: How can I get support for my Next Level Racing product?
A: For any product support, contact our friendly team at
[email protected]
[email protected] SIM
RACING JOURNEY STARTS HERE
We know you’re eager to start racing! Take your time with the instructions and follow this guide to assemble your product. You’ll be setting yourself up for success by following the instruction booklet to fully optimize your product.
WARNING & ASSEMBLY TIPS
- Please do not use power tools for assembly as over-tightening can damage your frame.
- Do not force parts together.
- Avoid cross threading threaded items.
- If in doubt consult the installation video (see QR code below or contact us at [email protected]
- Take extra care handling the Engraved Acrylic Panel when unboxing.
- Take care when adjusting Seat Recliner to avoid injury.
- Remove Seat Recliner warning stickers once GT Racer Seat is assembled.
If you require any support with your product please contact our friendly team at: [email protected]
WARNING
CHOKING HAZARD-Small parts not for children under 3 years or any individuals
who have a tendency to place inedible objects in their mouths.
IN THE BOX
UNIVERSAL HANDBRAKE PLATE
MOUNTING LOCATIONS
WHEEL PLATE
PRODUCT LEGEND
MOZA R5 / R9 / R16 / R21
MOZA Bottom Mounting Bracket
Logitech G Pro / G25 / G27 / G29 / G902 / G293
Thrustmaster T-818 / T500 RS / TGT / TSPC / TX
Fanatec DD1 / DD2 / CSL DD / DD
Pro Simagic M10 / Alpha / Alpha Mini
MOUNTING LOCATIONS
PEDAL PLATE
PRODUCT LEGEND
- Thrustmaster
- TLCM Thrustmaster
- T3PA Thrustmaster
- T300RS Logitech GPro
- Logitech G29
- MOZA SRP
- MOZA CRP
- Fanatec CSL Elite
- V2 Fanatec
- CSL Fanatec ClubSport V3
-
Align the Pedal Frame with the Rear Frame.
Bolt through the side of Frame and secure with 2 x M6 Bolts, Washers and Flange Nuts on each side. -
Bolt through the top of the Frame Assembly and secure with 1 x M6 Bolt and Washer on each side.
-
Align the Centre Wheel Support through holes with the Pedal Frame through holes.
Bolt through and secure with 2 x M8 Bolts, Washers and Flange Nuts on each side. -
Suggested Side Wheel Support position for users 120cm – 160cm tall.
Suggested Side Wheel Support position for users 160cm+ tall. -
Align the Side Wheel Supports with the Pedal Frame through holes at desired horizontal position.
Bolt through and secure with 2 x M6 Bolts, Washers and Flange Nuts on both sides. -
Align through holes on the Centre Wheel Support with the Side Wheel Support through holes. Bolt through and secure with 1 x M6 Bolt, Washer and Flange Nut on each side.
-
Align the Wheel Plate with the Wheel Deck and adjust to desired position.
Bolt through and secure with 2 x M6 Bolts, Washers and Flange Nuts on each side. -
prior to Step 9. The Shifter can be mounted to the left or right Side Wheel Support. Determine desired configuration
-
A) Align Shifter Plate through holes with Shifter Arm through holes.
B) Bolt through and secure with 2 x M6 Bolts, Washers and Flange Nuts. -
Bolt through and secure Shifter Plate to Shifter Arm with 1 x M6 Press Fit Bolt and Flange Nut.
-
A) Align the Shifter Assembly with the Wheel Deck Support on either the left or right side.
B) Adjust to desired Shifter height. -
A) Bolt through and secure Shifter Assembly to a Side Wheel Support with 2 x M6 Bolts, Washers and Flange Nuts.
B) Bolt through the inner Side Wheel Support through holes and secure with 1 x M6 Bolt and Washer. -
Lother side. oosen the pre-installed 2 x M8 Dome Shaped Bolts and Washers on the Seat Backrest. Repeat on the
-
Uninstall 4 x M8 pre-installed Dome Shaped Bolts and Washers from the Seat.
-
A) Align Seat Backrest Recliners with Seat Nut Inserts.
B) Bolt through and secure with 4 x M8 Dome Shaped Bolts and Washer, previously uninstalled in Step 13. -
A) Align Plastic Recliner Cover with Recliner System.
B) Lift the handle and secure Plastic Recliner Cover to Seat Recliner with 1 x M5 Screw. -
A) lighten the 4 X Dome Shaped Bolts and Washers, previously loosened in Step 13.
B Align the Seat Assembly with the Rear Frame of the cockpit. -
A) Align 4 x M6 Bolts and Washers with the through holes on the underside of the Rear Frame.
B) Bolt through and secure the Seat to the Frame with 4 x M6 Butterfly Nuts on the topside of the Seat Frame. -
A) Align the Buttkicker Mount with the Nut Inserts on the underside of the Seat Frame.
B) Bolt through and secure with 2 x M8 Bolts and Washers. -
A) Uninstall 4 x Threaded Rods and 8 x Flange Nuts from the inner threaded holes on the Plate.
B) Reinstall 4 x Threaded Rods and 4 x Flange Nuts into the outer threaded holes. Keep the second 4 x Flange Nuts uninstalled. -
uninstalled in SAlign the Universal Handbraktep 20. e with the Shifter Plate and secure with the remaining 4 x Flange Nuts
-
A) Use two strips of double-sided adhesive and stick them to the front of Centre Wheel Support.
B) Attach the Engraved Acrylic Panel to the Adhesive Strips on Centre Wheel Support. -
A) Remove the Wheel Plate by uninstalling 4 x M8 Bolts, Washers and Flange Nuts.
B) Adjust Wheel Plate to desired angle and position. Repeat Step 07 to reinstall Wheel Plate. -
Your Setup is Complete.
Video Instruction: bit.ly/nlrbuild
WARNING
- Please do not use power tools for assembly as over-tightening can damage your frame.
- Do not force parts together.
- Avoid cross threading threaded items.
- If in doubt consult the installation video (see QR code below or contact us at [email protected]
- Take extra care handling the Engraved Acrylic Panel when unboxing.
- Take care when adjusting Seat Recliner to avoid injury.
- Remove Seat Recliner warning stickers once GT Racer Seat is assembled.