next level RACING ERS3 SIM Racing Cockpit Instruction Manual

next level RACING ERS3 SIM Racing Cockpit

Product Information

Specifications

• Brand: Next Level Racing
• Product Type: Sim Racing Seat
• Contents: Seat Backrest, Seat Bottom, Seat Recliner Covers, Bolts, Washers, Bolt Covers, Allen Keys
• Compatibility: Various models including NLR ERS3, Elite Series, GTTrack, F-GT

Product Usage Instructions

Pre-Assembly Checks
Ensure all parts are included and check for any damages. Contact support if needed.

Assembly Steps

Step 1: Choose Your Seat Setup
Select the appropriate assembly guide based on your product model.

Step 2: Seat Recliner Assembly

Parts: Seat Backrest, Seat Recliners, Bolts, Washers

1. Align the threaded inserts on the Seat Backrest with the mounting holes on the Seat Recliners.
2. Bolt through and secure with the provided bolts and washers.

Step 3: Seat Recliner Cover Installation

Parts: Seat Recliner Covers, Bolts, Bolt Covers

1. Align the mounting holes on the Seat Recliner Covers with the Seat Recliners.
2. Bolt through and secure with the provided bolts and attach the Bolt Covers.

Step 4: Seat Adjustment

Warning: The Seat Recliners are spring-loaded. Handle with care during adjustments.

1. Lift both Seat Recliner Levers to change the angle of the Seat Backrest.
2. Release the levers to lock the backrest in place.

Step 5: Finalize Installation

1. Secure the seat brackets to the designated slots on the frame using the provided bolts.
2. Adjust the seat slider as needed for comfort.

Frequently Asked Questions (FAQ)

Q: Are the materials safe for children?
A: The product contains small parts and is not suitable for children under 3 years old.

TAKE RACING TO THE NEXT LEVEL
INSTRUCTION MANUAL

YsuOpport@neUxtlevelracRing.com
SIM RACING JOURNEY STARTS HERE

We know you’re eager to start racing! Take your time with the instructions and follow this guide to assemble your product. You’ll be setting yourself up for success by following the instruction booklet to fully optimize your product.

bit.ly/nlrbuild

• @next_level_racing
• @nextlevelracingOfficial
• @nextlvlracing
• Next Level Racing
• support@nextlevelracing.com

TAKE RACING
TO THE NEXT LEVEL
NEXTLEVELRACING.COM

support@nextlevelracing.com

PRE-RACE CHECKS

WARNING & ASSEMBLY TIPS

• Please do not use power tools for assembly as over tightening can damage parts.
• If you require further support, consult the installation video or contact us at support@nextlevelracing.com
• Do not force parts together.
• Avoid cross threading bolts.
• Beware of sharp edges.

If you require any support with your product please contact our friendly team at: support@nextlevelracing.com

WARNING
CHOKING HAZARD – Small parts not for children under 3 years or any individuals who have a tendency to place inedible objects in their mouths.

bit.ly/nlrbuild

IN THE BOX

NOTE: Some Items Come with Rust Resistant Coating

Video Instruction: bit.ly/nlrbuild

Assembly Steps

1. A) Align the threaded inserts on the Seat Backrest with the mounting holes on the Seat Recliners.
   B) Bolt through and secure with the M8 Bolts and Washers.

2. A) Align the mounting hole on the Seat Recliner Covers with the Seat Recliners.
   B) Bolt through and secure with the M5 Bolts and press fit the Bolt Covers to cover the hole.

3. Lift both Seat Recliner Levers to change the angle of the Seat Backrest. Release the levers adjusting the backrest to lock in place.

4. Uninstall the M8 Bolts and Washers securing the Seat Brackets to the 4040 Extrusions.

5. Remove the Seat Brackets.

6. the Seat Slider RLift the Seat Slider Lail. ever and slide the Seat Rails all the way back to access the rear mounting slots on

7. A) Align the Seat Slider rear mounting slots, with the T-Nuts in the rear 4040 Extrusion.
   B) Bolt through and secure with M8 Low Profile Bolts.

8. A) Lift the Seat Slider Lever up and slide the Seat all the way back to access the front mounting holes. Align the Seat Slider front mounting holes with the T-Nuts in the front 4040 Extrusions.
   B) Bolt through and secure with the M8 Low Profile Bolts.

9. Your installation is complete on the Elite Series Cockpit.

10. Uninstall the Bolts securing the Seat Brackets to the 4040 Extrusions.

11. Remove the Seat Brackets.

12. Uninstall the Ratchet Handles securing the 4040 Extrusion Assemblies to the Base Members.

13. Remove the 4040 Extrusion Assemblies.

14. A) Uninstall the Countersunk Bolts securing the End Plates to the 4040 Extrusions and remove the End Plates.
    B) For ease of installation in later Steps, move T-Nuts in the 4040 Extrusion to locations shown by red dots.

15. Washers that hold the Left and Right Base Members to the RUninstall the End Caps at the rear of the Base Members. Uninstall the upper Bolts andear Base Member.

16. RUninstall the Tatchet Handles were installed. -Nuts from the upper outside channel in the Left and Right Base Members where the

17. Install the T-Nuts previously uninstalled in Step 16 into the top channel of the Base Members.

18. Reinstall the Bolts, Washers and End Caps previously uninstalled in Step 15.

19. Reinstall the Bolts, Washers and End Caps previously uninstalled in Step 15.

20. A) Lift the Seat Slider Lever and slide the Seat Rails all the way back to access the rear mounting slots on the Seat Slider.
    B) Align the Seat Slider rear mounting slots with the T-Nuts in the rear 4040 Extrusion that was uninstalled in Step 13. Secure it to the Seat Sliders using M8 Low Profile Bolts.

21. A) Lift the Seat Slider Lever and slide the Seat Rails all the way forward to access the front mounting holes on the Seat Slider.
    B) Align the Seat Slider front mounting holes with the T-Nuts in the front 4040 Extrusion that was uninstalled in Step 13. Secure it to the Seat Sliders using M8 Low Profile Bolts.

22. Seat Brackets. Align the threaded holes on the end of the 4040 Extrusions with the mounting holes and slots on the

23. Bolt through and secure with Ratchet Handles previously uninstalled in Step 12.

24. the Base Members. Adjust the Seat to the desired distance from pedals. Secure the Bolts connecting the Seat Brackets to

25. For angle and height adjustment use the variety of mounting holes and slots provided on the Seat Brackets.

26. Your installation is complete on the Elite Series cockpit.

27. Lift the Seat Slider Lever and slide the GTTrack Seat all the way back to access the front Bolts.

28. Uninstall the M8 Low Profile Bolts securing the front Seat Slider Rails to the frame.

29. Lift the Seat Slider Lever and slide the GTTrack Seat all the way forward to access the rear Bolts.

30. Uninstall the M8 Low Profile Bolts securing the rear Seat Slider Rails to the frame.

31. Remove the GTTrack Seat Assembly.

32. A) Lift the Seat Slider Lever and slide the Seat Rails all the way back to access the rear mounting slots on the Seat Slider Rails.
    B) Identify the Seat Slider Rail mounting holes and slots marked by the arrows .

33. A) Align the identified Seat Slider rear mounting slots with the threaded inserts on the frame.
    B) Bolt through and hand tighten to help align the front Seat Rail holes on the cockpit in Step 35 with M8 Low Profile Bolts.

34. on the Seat SliderLift the Seat Slider L. ever and slide the ERS3 Seat all the way back to access the front mounting holes

35. B) Bolt through and secure with M8 LA) Align the identified Seat Slider front mounting holes from Sow Profile Bolts. Then secure the Bolts from Step 32B with the inserts in the frametep 33. .

36. Your installation on the GTTrack is complete.

37. Assembly. Uninstall the Bolts, Washers and Nuts securing the Shifter to the frame and remove the Shifter

38. A) Lift the Seat Slider LB) Uninstall the rear M8 Bolts securing the Seat Rever and slide the Seat all the way back to access the rear Bolts.ails to the Seat.

39. A) Lift up the Seat Slider Lever and slide the Seat all the way forward to access the front Bolts.
    B) Uninstall the front M8 Bolts securing the Seat Rails to the Seat and remove the Seat from the frame.

40. A) Lift the Seat Slider Lever and slide the Seat Rails all the way back to access the front mounting Bolts on the Seat.
    B) Uninstall the Bolts securing the Seat Sliders to the Seat.

41. A) Lift the Seat Slider Lever and slide the Seat Rails all the way forward to access the rear mounting Bolts on the Seat.
    B) Uninstall the rear M8 Low Profile Bolts securing the Seat Sliders to the Seat, and remove the assembly including the Seat Spacers.

42. A) Align the Seat Slider front mounting holes with the threaded inserts on the Seat.
    B) Bolt through and hand tighten M8 Bolts uninstalled in Step 39 to help align the Seat Rail rear slots.

43. A) Lift the Seat Slider Lever and slide the Seat all the way back to access the rear mounting slots.
    B) Align the Seat Slider rear mounting slots with the threaded inserts on the seat and secure with M8 Bolts uninstalled in Step 38. Then, secure the hand tight bolts from Step 42.
    

44. Your installation on the F-GT is complete.

support@nextlevelracing.com

WARNING

• Please do not use power tools for assembly as over tightening can damage parts.
• If you require further support, consult the installation video or contact us at support@nextlevelracing.com
• Do not force parts together.
• Avoid cross threading bolts.
• Beware of sharp edges.

ASSISTANCE

bit.ly/nlrbuild

If you require further support with your product, please contact our friendly team at: support@nextlevelracing.com

References

• Next Level Racing Video Instructions | Next Level Racing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>