hama 00201991 Quick Charger User Manual

: June 13, 2024
: Hama

Table of Contents

Explanation of warning symbols and notes
Package contents
Safety instructions
Operation
Care and maintenance
Technicaldata
Warranty disclaimer
Documents / Resources

Charger,USB-C, USB-A,PD/QC 3.0,2.0, 20 W
00
201991
Operating Instructions

Thank you for choosing this Hama product!
Take your time and read the following instructions and information completely.Pleasekeep these instructions in asafe place for futurereference.

Explanation of warning symbols and notes

Risk of electricshock
This symbol indicates arisk of electric shock from touching uninsulatedproduct partsthat maycarry hazardousvoltage.
Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

charger
these operating instructions

Safety instructions

Protect the product from dirt, moistureand overheating and use it in dry rooms only.
Donot drop the product and do not expose it to any major shocks.
Donot operate the product outside the power limits specified in the technicaldata.
Donot modify the device in any way.Doing so voids the warranty.
Donot continue to operate the product if it is visibly damaged.
Use the product only for the intended purpose.
As with all electrical products, this device should be kept out of the reach of children.
Donot use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Route allcables so thereisnorisk of tripping.
Do not bend or crush the cable.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Dispose of packaging material immediatelyin accordance with the locally applicable regulations.
The product is intended only for use inside buildings.
Only use the article under moderate climatic conditions.
Donot use the product in areas in which electronic products are not permitted.
Donot use the product in adamp environment and avoid splashing water.

Risk of electric shock

Donot open the device or continue to operate it if it becomes damaged.
Donot use the product if the AC adapter,the adapter cable or themains cable aredamaged.
Donot attempt to service or repair the product yourself.Leave any and all service work to qualified experts.

Operation

Note -mains voltage 100 -240 V
The charger is suitable for mains voltages of 100 -240 Vand therefore can be used worldwide. Please note that acountry-specificadapter may be necessary.
Warning -connectingdevices

Before connecting adevice, check whether it can be adequately supplied with thecharger’s current capacity.
Ensure that the power of the connected device does not exceed 20 W.
Note the instructions in your device’s operating manual.

Note -Power Delivery /QC3.0,2.0

Plug & GO: no additional software required, simply plug in and start: Thanks to Power Delivery /QC3.0, 2.0, the voltage and power are adjusted automatically.
Be aware that, for efficient and optimised charging, your terminal device must support the PD (Power Delivery) /QC3.0, 2.0 function.
If you have alarge number of PD/QC-enabled devices with different firmware updates, it may be that the function is not fully supported.

Warning

Only operate the product from asocket thathas been approved for the device. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cordfromthe socket.
If using amulti-socket power strip, make surethat the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
If you willnot be using the product for a prolonged period, disconnect it from mains power.

Unless different instructions have been expressly given in the operating instructions for the devices you arecharging, proceed as follows:

Connect your device to aUSB charging socket using asuitable USB cable.
Connect the charger to aproperly installedand easily accessible mains socket.
The charging process is displayed on your device.
Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
Then disconnect the charger from the line connection.

When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.

Care and maintenance

Only use soft, dry towels to clean theproduct.

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Technicaldata

Specifications accordingto Regulation (EU) 2019/1782

Brand name, commercial register number,address| Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim,
Germany
---|---
Model identifier| 201991
Input voltage| 100 –240 V
Input AC frequency| 50 /60Hz
Output voltage /output current /output power total| USB-C:
5.0V DC 3.0A/15.0W,
9.0V DC 2.22A/20.0W,
12.0V DC 1.67A/20.0W
USB-A:
3.6-6.0V DC 3.0A /10.8 18.0W,6.0-9.0V
DC 2.0A
/12.0 -18.0W,9.0-12.0V
DC 1.5A /13.5 -18.0W
USB-C+A:
5.0V DC 3.0A /15W
Average efficiency during operation| 81.40%
Efficiency at low load (10%)| 77.40%
Power consumption at zeroload| 0.10 W

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
**[www.hama.com](http://www.hama.com)
+49 9091 502-0 00201991/08.23**