PROJECT SOURCE IJC1691H-3 1-Light 7-in Matte Black Dark Sky Outdoor Wall Light Instruction Manual
- June 9, 2024
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE IJC1691H-3 1-Light 7-in Matte Black Dark Sky Outdoor Wall
Light
INTRODUCTION
Thank you for purchasing this Project Source product. We’ve created these easy
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service
department at 866-389-8827 , 8 a.m. – 8
p.m., EST, Monday – Sunday.
You could also contact us at
partsplus@lowes.com.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
Turn off the power and remove existing fixture.
-
Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
-
Attach BB to connections with electrical tape (not included).
-
Install light bulb (not included). Use a 65-watt max. medium-base incandescent BR30 bulb or CFL equivalent.
-
Assembly is complete. Turn power back on.
CARE AND MAINTENANCE
Wipe with damp cloth or use window cleaner. Do not use abrasive cleansers.
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years limited from the date of purchase.
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit lowes.com for more information.
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
---|---|---|
Bulb will not light. |
- Bulb is burned out.
- Faulty wire connection.
|
- Replace light bulb.
- Check wiring.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes