PROJECT SOURCE 4767240 All Purpose Poly-Filler Quart

PROJECT SOURCE 4767240 All Purpose Poly-Filler Quart

Thank you for purchasing this Project Source product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page. If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-389-8827, 8 a.m. – 8 p.m., EST, Monday – Sunday. You can also contact us at partsplus@lowes.com.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 2 Hours

TOOLS REQUIRED

FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit www.lowes.com for more information.

PRODUCT DESCRIPTION

Popular with multi-talented composite repair pros for filling and glazing chips, cracks, deep gouges, fillets, holes and voids on FRP composite surfaces including, bath ware, boats, marine, automotive, power sports, RV and industrial applications. Excellent for pre-refinish repairs on dry surfaces or where water drains and is not wet 24/7. Use alone or color coat for better cosmetic match.

• Hardness characteristics close to Acrylic and Gel coat.
•  Excellent putty to work, sand and glaze (Carvable).
• Epoxy fast-Quick cure 1-3 minutes.
•  Putty closely matches most bath ware white, requiring less coating to cover filled areas.
• Minimal pinhole fairing compound.
• Excellent adhesion.
•  Minimal shrinkage fill.
• Avoid Auto body, Automotive, bondo fillers when repairing composites associated with water and moisture environments.

Repairs:

• Acrylic
• Cultured Marble
• Metal
• Formica
• Concrete
• Porcelain Enamel
• Gelcoat

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

•  Obtain special instructions before use.
•  Do not handle until all safety precautions have been read and understood.
•  Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
•  Keep container tightly closed.
•  Ground/bond container and receiving equipment.
• Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools.
•  Take precautionary measures against static discharge.
•  Do not breathe dust/fume/gas/mist/vapors/spray.
•  Avoid breathing dust/fume/gas/mist/vapors/spray.
• Wash thoroughly after handling.
•  Do not eat, drink or smoke when using this product.
• Use only outdoors or in a well-ventilated area.
•  Avoid release to the environment.
• Wear protective gloves/protective clothing/eye protection/face protection.
• Flammable liquid and vapor.
• Causes skin irritation. Causes serious eye irritation.
• Harmful if inhaled.
• Suspected of causing genetic defects.
• Suspected of causing cancer.
• May damage fertility or the unborn child.
•  Causes damage to organs.
•  Causes damage to organs through prolonged or repeated exposure.
•  Toxic to aquatic life.

PACKAGE CONTENTS

•  Poly-Filler
•  Polyester white cream hardener (BPO) included

APPLICATION DETAILS
ADDITIONAL INSTRUCTIONS:

•   DAMAGE PREPARATION: A Dremel type tool can be used to grind the damaged area ready for Poly Filler.
• SANDING: For best results wet sand (with wet/dry sandpaper and water) 100, 220 and 320 grit sandpaper.
• SAFETY: Use proper ventilation. Avoid contact with skin and eyes.

INSTALLATION OVERVIEW

• Prepare the chip, gouge or crack by using a grinding tool, putty knife, razor knife or other sharp tool.
• Be sure to create a “V” shape going through the depth of the surface (color) stopping at the fiberglass structure – 1/16” to 3/16” deep.
• Dispense a desired amount of Poly Filler into the mixing cup. Add 3% to 5% cream hardener to the Poly Filler and mix thoroughly using the provided stir stick.
• Then apply mixture to the repair area. Be sure to over fill the crack or chip slightly.
• The mixed material must be used within 5 minutes.
• Wet sand so that the contour of the repair matches the surrounding area starting with the 100 grit and finishing with the 320 grit.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>