PROJECT SOURCE 66351058 Flush Mount Ceiling Fixture Instruction Manual
- June 1, 2024
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE 66351058 Flush Mount Ceiling Fixture
Thank You
Thank you for purchasing this PROJECT SOURCE product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Installing a fixture into an electrical system not having a proper grounding means for grounding could allow all metal parts of the fixture to carry electrical current if any of the fixtures wires, wire connections or splices become broken, cut or loose. Anyone coming in contact with the fixture is subject to electrical shock, which could cause serious injury or death.
- Wire connectors will not support the weight of this fixture. Suspending this fixture by the supply wires and wire connectors will result in the fixture falling, with the possibility of personal injury and the danger of electrical shock or fire.
CAUTION
- Make sure that all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199. Hire a qualified electrician if you are unfamiliar with installing electrical wiring.
- Turn off electricity at main fuse box (or circuit breaker box) before beginning installation.
- Do not use bulbs having a wattage greater than the maximum value stated on the fixture. The use of a higher wattage lamp(s) than specified will increase temperatures and may cause risk of fire.
CARE AND MAINTENANCE
Shut off the main power supply before you begin any maintenance tasks. Periodically clean the fixture using a mild, non-abrasive glass cleaner and soft cloth. Do NOT use solvents or cleaners containing abrasive agents and do not spray liquid cleaner directly onto the bulb or wiring.
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit www.lowes.com for more information.
8021PB • 111523
Printed in China
Impreso en China
SAFETY INFORMATION
CAUTION
- All fixtures must be mounted to an outlet box that is supported by the building structure. Do not attempt to support the fixture by drywall alone. The fixture may fall and cause personal injury
- Do not connect the fixure’s ground wire (green or bare) to the black (hot) current carrying or white (neutral) supply wire from the outlet box.
- Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
WARRANTY
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase. If within this period the product is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The manufacturer will, at its option, repair, replace or refund the purchase price to the consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. This warranty does not cover fixtures becoming defective due to misuse, accidental damage or improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions of limitations on an implied warranty, the above exclusion and limitation may not apply. This warranty gives you specific rights and you may also have other rights which may vary from state to state
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 35 minutes
Tiempo estimado de ensamblaje: 35 minutos
TOOLS REQUIRED (NOT INCLUDED)/HERRAMIENTAS NECESARIAS PARA EL ENSAMBLAJE NO SE INCLUYEN):
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
Turn OFF the electrical power at the main fuse or circuit breaker.
Loosen the ground screw (AB) on the mounting bracket (OO) and wrap the bare
wire from the fixture around the ground screw (AB). Tighten the ground screw
(AB) to hold the bare wire in place.
Connect black ceiling plate wire to black supply wire. Connect white ceiling
plate wire to white supply wire Connect ceiling plate ground wire to supply
ground wire. If supply wire colors differ from these, contact a professional
electrician to determine proper wiring.
Connect black ceiling plate wire to black supply wire. Connect white ceiling
plate wire to white supply wire Connect ceiling plate ground wire to supply
ground wire. If supply wire colors differ from these, contact a professional
electrician to determine proper wiring.
Use 60-watt max. E26-base LED, CFL or incandescent bulbs.
Note: If glass bowl (B) is not secure, adjust the hex nut preassembled on
the threaded rod (PP).
Restore the power at the main fuse or circuit breaker.
Customer Support
PROJECT SOURCE and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Questions, problems or missing parts?
Before returning contact us at:
866-389-8827, 8 a.m. – 8 p.m., EST,
Monday – Sunday or ascs@lowes.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>