Baseus PB4057Z-P0A1 Laptop Power Bank 140W User Manual

PB4057Z-P0A1 Laptop Power Bank 140W
User Manual

PB4057Z-P0A1 Laptop Power Bank 140W

User Manual
Baseus iota Series Portable Power Station 1404 (US/JP 1I0V)

Thank you for purchasing Baseus io Ta Series Portable Power Station (hereinafter referred to as Baseus Digital Portable Power Station). The information contained herein affects your safety and your legal rights and responsibilities. Read  this entire document carefully to ensure proper configuration before use. Failure to read and follow the instructions and warnings herein may result in serious injury to you or bystanders, or damage to your device or property. Shenzhen  Baseus Technology Co. Ltd. reserves the right of final explanation for this document and all relevant documents relating to Baseus Digital Portable Power Station, and the right to make changes at any time without notice.
By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while  using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all terms, precautions, practices, policies and guidelines Shenzhen Baseus Technology Co. Ltd.  (Baseus Digital Portable Power Station) has made and may make available.
Shenzhen Baseus Technology Co. Ltd. (Baseus Digital Portable Power Station) accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. Users shall observe safe operation
guidelines including, but not limited to, those set forth herein.

Function Description

• This product is developed based on industry-leading digital power technology. It supports PD3.1 140W dual-way fast charging, fully charges your device in a snap;
• This product uses a LCD screen to display real-time operation status (battery level, operating temperature, current input/out- put power, remaining charging time), charge and discharge reminder, port status, etc.
• It supports correction wave inverted AC output, easily powering up products with rated power less than 140W, such as car mini-fridges, car ice makers, desktop lamps, laptops, cell phones, etc.
• It supports simultaneous power output of up to 6 products, with a maximum of 140W PD fast charging via a single Type-C1 port; it also accommodates multiple protocols for USB/Type-C-based fast power output to meet the  charging needs of digital products.
• The Type-C1 port supports PD 3.1 output (Max. 140W), fully charges its elfin about 2 hours.
• The built-in LED lighting provides three lighting modes: long light, SOS and strobe. You can switch the mode by pressing the button or adjust the brightness of the long light via the app.

Product Specification

Name: Digital Power Bank 140W
Model No.: BPE14B
Battery Capacity: 48000mAh/153.6Wh
Type-Cl Input: 5V-3A, 9V-3A, 12V—3A, 15V-3A, 20V—5A, 28V-5A 140W Max.
AC Output: 100V-120V-~ 1.28A 60Hz, 140W (Correction wave; Peak Power 280W)
USB1 Output: 5V 3A, 9V 3A, 10V 2A, 12V 2.5A
Type-C1 Output: 5V—3A, 9V—3A, 12V—3A, 15V—3A, 20V-5A, 28V-5A 140W Max.
Type-C2 Output: 5V—3A, 9V=3A, 12V—2.5A
Type-Cl+Type-C2 Output: lOOW+30W
USB1+Type-C1 Output: 30W+100W
USB1 +Type-C2 Output: 5V-SA
Type-Cl+(Type-C2+USB1 } Output: 100W+25W
DC Output: 13.5V-7.4A LOOW Max.
Total Output: 140W
Product Size: 157 X 157 X94mm
Weight: About 2.2kg
Implementation Standard: Q/BASEUS 047
List of Accessories: Superior Series Fast Charging Data Cable Type-C to Type-C (240W), User Guide, Warranty Card, Storage bag

Package including

Base iota Series Portable Power Station 140(0$//P 110XL
Superior Series Fast Charging Data Cable Type-Ct0 Type(/240/«L
her Mana0Kl
Warty Cal
Storage bixin

Shanties 0ls.ply of Product

Download the Baseus App and User Manual

• Scan the QR code on the right for the download address with your mobile device, or https://us.baseus.com/download (in other languages) in the search bar to download the app.
• Please follow the guide in the app to register (if you have registered, please login directly), login, add equipment, and then connect and operate.

https://bds-api-cn.baseus.com/app/official/download

Instructions

Note: The following instructions assume that the APP has been connected to the product. If the connection is broken or the distance between them is too far (over 10 meters), the APP may not be able to instantly respond or issue  reminders or alerts timely, affecting user experience. It is recommended to use the product while keeping the APP on and keep them close for smoother use.

1. Start/shutdown

• Press the power button for 2s to turn on the product, the power indicator lights up, screen prompts to enter standby mode
  In the power-on state, press and hold the power button for 2 seconds to turn it off with the power indicator off. The default standby time of this product is 15 minutes. If the inverter switch/LED light switch is off and the product has no load accessed, the product will automatically turn off in 15 minutes. 2. How to charge a device
  1) Charge a device via a USB/Type-C/DC port
  * After the product is turned on, the USB/Type-C/DC port will enter the standby mode and can be used to charge cell phones or other digital products with compatible data cables.
• Meanwhile, the main screen will display four parameters for reference, including the current total output power, current temperature, remaining battery level, and remaining discharge time under the current output power.

2. Charge a device via the AC port

• After the product is turned on, press and hold the AC output button for 2 seconds to enable AC inversion output, with the AC output indicator on. Now you can plugin and charge an AC device.
• Under the AC output state, press and hold the AC output button for 2 seconds to disable AC inversion output, with the AC output indicator off.
  Warning: There is a high voltage output after the AC inversion output is enabled. Please do not plug metal or conductive objects into the AC main socket to avoid electric shock.
  3) How to charge the product
  * This product supports up to 140W PD fast charging, and accommodates all adapters and car-mounted chargers that are compatible with the PD protocol.
• When the product starts charging, it will enter the power-on state automatically in order to monitor all modules and provide feedback on operation status in real time. Note:
  * The product will not enter automatic shutdown when it is charged with a device through USB/Type-C/DC/AC ports.
• The value of each parameter on the main screen is measured by a built-in program, which may be subject to errors and changes in real time. The parameter information is for reference only.
• Please check the charging and discharging chart of the ports in the APP for more details about the charging and discharging of the ports.

4. LED Lighting

• This product comes with a LED floodlight for emergency lighting needs;
• Press and hold the LED switch/mode switch button for 2 seconds to turn on the LED light. The light has a default state of staying on for long; or it can be switched by pressing applicable buttons to two other modes which are SOS and strobe.
• Please adjust the brightness under the long-on mode in the app.
• Under the LED lighting state, press and hold the LED switch/mode switch button for 2 seconds to turn it off.
  Note: If the LED lighting is on, the default standby time of this product will be adjusted to 8 hours for any need of emergency lighting at night.

5. Advanced use of the APP
   (1)You can contact Baseus for Ion 1 customer service via the app to solve problems you may have.
   (2) The device name can be edited in the app.

FAQ

1.What type of battery is used in the product?

This product uses high quality automotive-grade lithium iron phosphate battery.

©What equipment can be charged via the AC output port of the product?

The AC output of the product is rated at 140W with a peak power of 280W, being able to supply power to most consumer electronics. However, please check the rated power of your equipment and make sure that the total power of all load equipment is lower than the rated power before using it.

How do I know how long the product can supply power?

The LCD display will show the remaining battery life and calculate a remaining discharge time based on the current power, for reference only.

(4)How can I tell the product is charging?

When charging, the LCD display will show the remaining charging time and input power.

(5.) Does the product support simultaneous charging and discharging?

The Type-C port and USB port support simultaneous charging and discharging.

*How to clean this product?

Please use a dry, soft and clean cloth or paper towel to wipe this product.

(t) Can I carry this product on the plane?

Air transportation requires the carried device no greater than 160Wh, and this product is only 153.6Wh, so with the airline's approval, you can bring this product on a plane (please refer to the airline's requirements on the spot at the time).

*How do I store and maintain the product?

• It is recommended to use or store the product with a temperature of 20-30°C, and keep it away from water, heat source and metal objects. For long-term storage, please charge and discharge the product once every 3 months (discharge it to 30% and then charge it to 60%). For safety reasons, do not store this product when the temperature is higher than 45°C or lower than -10°C for a long time. If the power of this product is less than 1% after use, please charge it to 80% before storing it. If left idle for a long time in low or full battery, its battery core will suffer irreversible damage and the service life of the product will shorten. If the product has low remaining power and has been idle for too long (not in over-discharged state), it will enter deep sleep mode and need to be charged before being used again.

Common Problems & Troubleshooting

operation will resume automatically once the load is normal.
Icon flashes| Type-C overload protection| Remove the abnormal load and normal operation will resume automatically once the load is normal.
Icon flashes| Type-C high-temperature protection| Normal operation will resume automatically after the product cools down.
Icon flashes| Battery charging high temperature protection| Normal operation will resume automatically after you stop the charging and place it in a cool and ventilated place.
Icon flashes| Battery discharge high temperature protection| Normal operation will resume automatically after the battery cools down.
Icon flashes| Battery charging low temperature protection| Normal operation will resume automatically after the battery temperature is restored to above 5°C (41°F).
Icon flashes| Charging overload protection| Normal operation will resume automatically after being restarted.
Icon flashes| AC output overload protection| Normal operation will resume after removing the over-powered device and restarting the product. Electrical appliances must be used within the rated power.
Icon flashes| AC over-temperature protection| Please remove the abnormal load, and put the product in a cool and ventilated place, and it will resume normal automatically.
Icon flashes| AC discharge low-temperature protection| Normal operation will resume automatically after the ambient temperature is restored.
 Icon flashes| Fan blocking|  Please check whether the fan is blocked by foreign objects and remove them if so.
Icon flashes| DC overload protection| Normal operation will resume automatically once the load is normal.
Icon flashes| DC high temperature protection| Normal operation will resume automatically after the product cools down.
Icon flashes| Battery discharge low temperature protection| Normal operation will resume automatically after the battery temperature is restored to above 5°C (41°F).
Icon flashes| Battery discharge under voltage protection| Please charge the product immediately.
Icon flashes| Failure of communication with BMS| Normal operation will resume automatically after being restarted.

If any alert occurs during the use of this product and the alert icon does not disappear after the product is restarted, please stop using the product immediately (do not attempt to charge or discharge). If the above information fails to resolve your problem, please contact customer service for further support.

Statement on Toxic and Hazardous Substances in Electronic Information Products

Lead
(Pb)| Mercury
(Hg)| Cadmium
(Cd)| Hexavalent chromium (Cr VI)| Polybrominated
biphenyls (PBB)| Polybrominated
diphenyl ethers
(PBDE)
PCB| X| 0| 0| 0| 0| 0
Plastic| 0| 0| 0| 0| 0| 0
Metal| X| 0| 0| 0| 0| 0
Accessory| 0| 0| 0| 0| 0| 0

This form is prepared in accordance with SJ/T 11364 regulations.

O: Indicates that contents of the toxic and hazardous substances in all homogeneous materials are below the limit requirements specified by GB/T 26572 standard.
X: Indicates that contents of the toxic and hazardous substances exceed the limit requirements specified by GB/T 26572 standard in at least one homogeneous material of the component.
This product complies with EU RoHS 2.0 Directive(2011/65/EU)
The 5-year icon refers to the “effective life of environmental protection” , not the product quality assurance period.
Electronic products all contain toxic and harmful substances such as lead, mercury and cadmium. Once they are overused, toxic and harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage
to people and property. The term of* environmental protection use” means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety  risks that arise after the safe use period.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference  that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there  is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
waning
Operation of this equipment in a residential environment could case radio interference.

Warning Please follow the above safety instructions
otherwise it may cause fire, electric shock,
damage or other injuries.
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2″ Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangue Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: Q/BASEUS 047
Hotline: +86-4000-712-711 Website: www.baseus.com
Official After-sales E-mail Address:
service@baseus.com (China) / care@baseus.com (Global)
‘Designed by Baseus
‘Made in China
P84057240AL
10000/7954

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>