PROJECT SOURCE KTE1601AX-03 Brookvale 1 Light 9 in Black Outdoor Wall Light Instruction Manual
- May 15, 2024
- PROJECT SOURCE
Table of Contents
ITEM #5632031
8-IN OUTDOOR WALL LANTERN
MODEL #KTE1601AX-03
PROJECT SOURCE and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Thank you for purchasing this Project Source product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-389–8827 , 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at ascs@lowes.com.
AS23507
CARE AND MAINTENANCE
- Wipe with damp cloth or use window cleaner. Do not use abrasive cleansers
WARRANTY
- The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years limited from the date of purchase.
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit lowes.com for more information.
Made in China
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
---|---|---|
Bulb will not light. | 1. Bulb is burned out. | |
2. Faulty wire connection. | 1. Replace light bulb. |
2. Check wiring.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes
TOOLS REQUIRED (NOT INCLUDED)
QUICK REFERENCE GUIDE
PACKAGE CONTENTS
A: x1 (preassembled on F)
B: x2 (preassembled on A)
C: x2 (preassembled on B)
D: x2 (preassembled on B)
E: x3 (preassembled on F)
F: x1
G: x1
HARDWARE CONTENTS
Note: Hardware shown actual size.
AA x2 BB x3
INSTALLATION OVERVIEW
Turn off the power and remove existing fixture.
Unscrew the cap nuts (D) from mounting screws(B) and remove washers (C). Save
for later use. Separate the crossbar (A) from canopy of fixture body (F).
Attach (A) to outlet box using (AA).
Temporarily place (F) through (B) determine amount of adjustment necessary (B).
Feed wires. Twist stripped wire ends together with pliers (not included), black to black, white to white, and ground/bare to ground/bare.
Attach (BB) to connections with electrical tape (not included).
Place canopy of fixture body (F) onto mounting screws (B). Secure with previously removed washers (C) and cap nuts (D).
Unscrew the thumb Screws(E) from socket cup.
Insert the glasss hade (G) into the fixture body (F). Tighten three thumb screws (E)to secure glass shade (G).
Install light bulb (not included). Use 60-watt max. standard-base incandescent bulb or CFL/LED equivalent.
Use silicone caulking (not included) to seal between wall and canopy of fixture body (F). Leave bottom unsealed so moisture can drain out.
Assembly is complete. Turn power back on.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>