KLARSTEIN 10032121 Maischfest Mash Kettle Mash Tank Instruction Manual

: June 9, 2024
: Klarstein

Table of Contents

KLARSTEIN 10032121 Maischfest Mash Kettle Mash Tank
TECHNICAL DATA
SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
KEY FUNCTIONS
DISPLAY AND DISPLAY KEYS
OPERATION
ERROR MESSAGES
DISPOSAL CONSIDERATIONS
MANUFACTURER & IMPORTER (UK)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KLARSTEIN 10032121 Maischfest Mash Kettle Mash Tank

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Item number	10032121	10033340	10033341
Volume	25 L	28 L	35 L
Power supply	220-240 V ~ 50-60 Hz

SAFETY INSTRUCTIONS

Children are not allowed to use the device! Mentally, sensory and physically impaired persons may only use the device if they have previously been familiarized in detail with the functions and safety precautions by a supervisor responsible for them and understand the associated risks.
Check the voltage on the device label before use. Only connect the device to sockets that correspond to the voltage of the device.
Do not use the device with a damaged power cord. If the power cord or plug
are damaged, they must be replaced by the manufacturer, an authorized service center, or a similarly qualifi ed person.
Switch off the device after each use and disconnect the plug from the socket.
Unplug the unit from the wall outlet before cleaning and allow the unit to cool completely.
Place the unit securely in the center of the work surface.
Do not let the power cord hang over the work surface.
Do not turn the unit on when the tank is empty.
Do not place the appliance near gas stoves, electric stoves or ovens.
Be careful not to get the plug and power cord wet in case the unit leaks.
The appliance is not intended for commercial use, but only for use in household and similar environments. This includes kitchens in offi ces, farms, hotels, motels and establishments offering bed & breakfast.
Do not leave the appliance unattended during operation.
Do not remove the lid while the contents are cooking.
When removing the lid, hold it so that the steam fl ows away from you.
Do not move the unit while liquid is in it.
Do not overfi ll the unit to prevent the liquid from overfl owing.
If the power cord or plug is damaged, it must be replaced by the manufacturer, an authorized service center, or a similarly qualifi ed person.
Make sure that children do not play with the device.
Do not place the device near water or in damp rooms.
Do not clean the device with a high-pressure cleaner and do not immerse the device in water.

CAUTION: Risk of burns! The device parts can become very hot during use. Do not touch the surfaces during use.

PRODUCT DESCRIPTION

Lid
Body
Display
Reset button (on the underside of the device)
Power switch (3000 W/1500 W)
On/Off
Stainless steel tap
Handle
Lock
Handle

KEY FUNCTIONS

ON/OFF switch Start or stop the unit.

Note: Never operate the appliance without water to avoid damage to the appliance.

Reset button
The boiler will auto switch off as overheat protection. Please refill water and push the reset button (at the bottom of boiler) for re-start.

Power adjust switch
Plug on the 1500W switch, indicator light turns on, boiler keeps warm. Plug on the 3000W switch, indicator light turns on, boiler is heating with power 3000W.
Fahrenheit and Celsius conversion method After start, press the SET button for 10 seconds, and then press [+] or [-] button to switch.

DISPLAY AND DISPLAY KEYS

[ON/OFF]: the switch of the LCD display.
[+/-]: use to set keep warm temperature from 60-100°C.
[SET]: set the keep warm temperature, then press „SET“ button to confirm.

Note: The temperature is measured at the bottom of the unit.

OPERATION

How to make wort
The element cover should be put in the urn, as it prevents the „stuffs“ caking onto element and burn out the urn. Pour water into the urn. Grind the malt, and heat it up to 55-65 °C, keep heating it up constantly in 3 hours. String it every 30mins. After 3 hours, get a spoon of „wort“ and use iodine to test it every 10mins. If it not shows „light blue“, it means the starch turn into Malt. Opposite, please keep the above instruction and do the testing again. Please boil the „wort“ for 30 mins. And then do the sediment process. Please re-do the filtrate step again until you get lucid liquid. Please cool it down to 10-12 °C.

Please use filter bucket to get rid off the residue. If the residue is too small, please use a gauze to filtrate the residue.
The device has a ring which can be placed on the boiler, to put the filter bucket on it, so that the mash can drip off.

Pre-fermentation
Please prepare yeast, the yeast dosage is 10% of „wort“ liquid. Please prepare 250ml „wort“ and mix it with yeast in a disinfectant content and stir it. Make sure you the
„mixture“ under 20-25℃ environment temperature to cultivate for 12-24 hours. (the more yeast you put, the fermentation process is faster). always string the „mixture“, when the fermentation is done, put it in a big urn and mixture it will all „wort“ which had been prepared.

Main Fermentation
The main fermentation takes 5 to 7 days. The temperature should be kept at 8-12 °C.

18-24 hours later: bubbles will be on the liquid surface.
2nd-3rd day: there will be more bubbles
4th-6th day: the bubbles will start to sink

After the bubble finish sinking, please taste the fermentation juice, when you feel the taste is smooth, and with yeast taste, the (young) beer is ready!

ERROR MESSAGES

E1| Open circuit on the hot conductor| The hot conductor is damaged, has a poor contact, has fallen off or is disconnected. Contact a specialist company for repair.
---|---|---
E2| Short circuit on the hot conductor| The hot conductor is damaged or has been short- circuited. Contact a specialist company for repair.
E3| Device runs dry| The built-in dry-running protection has reset the unit due to excessive temperatures. Please check that,

if viscosity of liquid is too high, it must be stirred regularly especially in area of temperature sensor to avoid thermostat issues. Press on the reset pin on the bottom of the boiler. When a sound is heard, the boiler is ready for operation again

E4| Temperature at sensor too high| The temperature in the boiler rises by more than 30°C in one minute or too little water in the boiler. Please check that, if viscosity of liquid is too high, it must be stirred regularly especially in area of temperature sensor to avoid thermostat issues and more water may need to be added. Press on the

reset pin on the bottom of the boiler. When a sound is heard, the boiler is ready for operation again.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical
and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.