PROJECT SOURCE 42658 Traywick 2-Light 12 Inch Matte Black LED Flush Mount Light Instruction Manual

June 2, 2024
PROJECT SOURCE

42658 Traywick 2-Light 12 Inch Matte Black LED Flush Mount Light
Instruction ManualPROJECT SOURCE 42658 Traywick 2-Light 12 Inch Matte
Black LED Flush Mount Light

PROJECT SOURCE and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

42658 Traywick 2-Light 12 Inch Matte Black LED Flush Mount Light

Thank you for purchasing this Project Source product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting  it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service department at 866-389-8827, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also

CARE AND MAINTENANCE

Shut off the main power supply before you begin any maintenance tasks. Periodically clean the fixture using a mild, non-abrasive glass cleaner and soft cloth.
Do NOT use solvents or cleaners containing abrasive agents and do not spray liquid cleaner directly onto the bulb or wiring.

FEELING CONFIDENT? START YOUR NEXT PROJECT

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

  • Installing a fixture into an electrical system not having a proper grounding means for grounding could allow all metal parts of the fixture to carry electrical current
    if any of the fixture wires, wire connections or splices become broken, cut, or loose. Anyone coming in contact with the fixture is subject to electrical shock, which
    could cause serious injury or death.

  • Wire connectors will not support the weight of this fixture. Suspending this fixture by the supply wires and wire connectors will result in the fixture falling, with the
    possibility of personal injury and the danger of electrical shock or fire.

CAUTION

  • Do not use bulbs having a wattage greater than the maximum value stated on the fixture. The use of a higher wattage lamp(s) than specified will increase temperatures  and may cause risk of fire.
  • Make sure that all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199. Hire a qualified electrician if you are unfamiliar with installing electrical wiring.
  • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation.
  • All fixtures must be mounted to an outlet box that is supported by the building structure. Do not attempt to support the fixture by drywall alone. The fixture may fall  and cause personal injury.
  • Do not connect the fixture’s ground wire (green or bare) to the black (hot) current carrying or white (neutral) supply wire from the outlet box.
  • Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

WARRANTY

The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase. If within this period the  product is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The manufacturer will, at  its option, repair, replace or refund the purchase price to the consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. This warranty does not cover fixtures becoming defective due to misuse, accidental damage or improper handling and/or installation and specifically excludes liability for direct,  incidental or consequential damages. As some states do not allow exclusions of limitations on an implied warranty, the above exclusion and limitation may not apply. This  warranty gives you specific rights and you may also have other rights which may vary from state to state.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 35 minutes
TOOLS REQUIRED (NOT INCLUDED)

PROJECT SOURCE 42658 Traywick 2-Light 12 Inch Matte Black LED Flush Mount
Light - Figure 2

PACKAGE CONTENTS

PROJECT SOURCE 42658 Traywick 2-Light 12 Inch Matte Black LED Flush Mount
Light - Figure 3

HARDWARE CONTENTS

PROJECT SOURCE 42658 Traywick 2-Light 12 Inch Matte Black LED Flush Mount
Light - Figure 4

INSTALLATION OVERVIEW

PROJECT SOURCE 42658 Traywick 2-Light 12 Inch Matte Black LED Flush Mount
Light - Figure 5

Turn OFF the electrical power at the main fuse or circuit breaker.

PROJECT SOURCE 42658 Traywick 2-Light 12 Inch Matte Black LED Flush Mount
Light - Figure 6

Connect black ceiling plate wire to black supply wire. Connect white ceiling plate wire to white supply wire. Connect ceiling plate ground wire to supply ground wire. If supply wire colors differ from these, contact a professional electrician to determine proper wiring.PROJECT SOURCE 42658 Traywick 2-Light
12 Inch Matte Black LED Flush Mount Light - Figure 7

You may need to adjust hex nut (F) to allow the screws (E) to be adjusted.

Use 60-watt max. E26-base LED, CFL or incandescent bulbs.

Note: If glass bowl (B) is not secure, adjust the hex nut (AC) preassembled on the threaded rod (PP)

Restore the power at the main fuse or circuit breaker.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

PROJECT SOURCE User Manuals

Related Manuals