PROJECT SOURCE L-1 Refrigerator Water Filter User Manual
- June 8, 2024
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE L-1 Refrigerator Water Filter
Thank you for purchasing this Project Source Refrigerator Water Filter. We’ve created these easy-to-follow instructions to ensure you have a simple installation process. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 1-866-389-8827, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.
Gracias por comprar este filtro de agua para refrigerador Project Source. Hemos creado estas instrucciones faciles de seguir para asegurarnos de que tenga un proceso de instalaci6n sencillo. No obstante, si necesita mas informaci6n que la entregada aquf, visite Lowes.com, busque el numero de articulo y consulte la pestaiia Guides & Documents (Guias y documentos) en la pagina del producto.
Si el articulo ya no esta a la venta o si tiene alguna pregunta o problema, llame a nuestro Departamento de Servicio al Cliente al 1-866-389-8827, de lunes a domingo de 8 a.m. a 8 p.m., hora estandar del Este. Tambien puede comunicarse con nosotros a traves de partsplus@lowes.com o visitar www.lowespartsplus.com.
TROUBLESHOOTING
PROBLEM PROBLEMA| POSSIBLE CAUSE CAUSA POSIBLE| CORRECTIVE
ACTION ACCl6N CORRECTIVA
---|---|---
Missing O-Ring
Falla una junta 16rica
| Manufacturer Error Error del fabricante| Call Customer Service for replacement: 866-389-8827
Llame al Departamento de Servicio al Cliente para obtener un reemplazo: 866-389-8827
Leaking| Improper Installation| Remove and reinstall, ensuring the filler is
securely installed
Fugas| lnstalaci6n inadecuada| within the refrigerator housing.
Retire y vuelva a instalar, asegurandose de que el filtro este instalado de manera segura dentro de la carcasa del refrigerador.
Slow Flow/No Flow| Improper Installation/Trapped Air Inside of the Filter|
Submerge filter without safety cap in a bowl or sink full of water
Flujo lento/sin flujo| lnstalaci6n indebida/aire atrapado en el interior del
filtro| for 45 minutes to 1 hour, reinstall.
Sumerja el filtro sin tapa de seguridad en un recipiente o
fregadero lleno de agua durante 45 minutos a 1 hora, vuelva a instalar.
CARE AND MAINTENANCE
Replace filter every 6 months or 300 gallons, whichever precedes./Reemplace el
filtro cada 6 meses o 1135,62 litros, lo que ocurra antes.
WARRANTY
This replacement filter cartridge is warranted to be free from defects in material and manufacture for one ( 1) year from the date of purchase. This warranty does not cover any failures resulting from abuse, misuse, alteration, or damage not caused by the manufacturer or failure to follow proper installation and use instructions. If the product fails to satisfy this limited warranty during the described period, the manufacturer will replace or refund the purchase price of the product. This warranty does not cover additional costs such as labor.
A SAFETY INFORMATION
WARNING
To reduce the risk of property damage due to water leakage, this filter MUST
be installed in accordance with the manufacturers specifications and
instructions. Installation shall comply with applicable state and local
regulations. For cold water applications only. Do not use with water that is
microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system. Systems certified for cyst reduction may be used
on disinfected waters that may contain filterable cysts.This filter unit must
be replaced every 6 months, at the rated capacity, or sooner if reduced water
flow occurs. Failure to follow instructions and operating specifications will
void your warranty. Further, manufacturer assumes no responsibility or
liability for damages arising out of misuse of the product. Protect from
freezing.
INSTALLATION OVERVIEW
- Locate water filter and remove the existing filter by rotating it counterclockwise.
- Carefully remove the sanitary cap from the top of the new filter
- Align the start arrow on the water filter with the arrow on the refrigerator filter housing.
- Rotate water filter clockwise into refrigerator housing a full V4 turn. Note: Please ensure the filter is fully installed as it is required to activate the internal water valve. If the filter isn’t properly installed, you may experience a slow flow or a chattering noise. If this occurs, please uninstall and reinstall the filter ensuring the filter is fully installed.
- Run approximately 2.5 gallons of water from the dispenser periodically to clear the system and to receive a good flow. If the water flow is slower than usual, please repeat Steps 3 and 4. Note: Initial flow rate may be slower than expected. Full flow rate should be restored within 24-36 hours.
- Inspect the filter for any noticeable leaks. If leaks are detected, please repeat Steps 3 and 4.
- To reset the filter monitor light, please refer to your refrigerator owner’s manual for specific instructions.
- Locate the included Water Filter Replacement Calendar and follow the instructions on the label.
SPECIFICATIONS
- Flow Rate: .5 gpm (1.89 lpm)
- Opera1ing Temperature: 33′-1 OO’F (0.6′ -38’C)
- Min Operating Pressure: 30 psi (207 kPa)
- Max Opera1ing Pressure: 100 psi (689 kPa)
- capacity: 6 months or 300 gallons (1,136 liters)
This L-1/L-1-2 is Tested and Certified by NSF International against NSF/ANSI Standard 42 and 53 for the reduction of chlorine taste and odor, Tetrachlorethylene, Endrin, Carbon Tetrachloride, Trichlorobenzene, p-Dichlorobenzene. Refer to performance data sheet for complete list of claims.
This L-1/L-1-2 is Certified by IAPM O R&T against NSF/ANSI Standard 42, 53, 372, 401,P473 and CSA B483.1 for the reduction of Chlorine taste and odor, Lead, Cyst, VOC’s,Mercury, Asbestos, Phannaceuticals (such as Naproxen, Ibuprofen and Phenytoin),BPA, PFOA/PFOS. Refer to Perfonnance Data Sheet for oomplete list of claims.
The compounds under NSF/ANSI 401 have been deemed as ‘incidental contaminants / emerging compounds’.
PROJECT SOURCE and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>