CELLY TC1USBC20WEVO Charger For Mobile Devices Smartphone White User Manual
- June 12, 2024
- celly
Table of Contents
CELLY TC1USBC20WEVO Charger For Mobile Devices Smartphone White
Product Information
- Specifications:
- Model: TC1USBC20WEVO
- Input: 110-240V AC
- Output: Refer to device compatibility
- Double insulation
- RoHS compliant
- CE marked
Product Usage Instructions
- Compatibility Check:
- Before charging your device, ensure that its technical characteristics (voltage, output, and amperage) match the charger specifications.
- Cleaning:
- Disconnect all cables before cleaning. Use a damp cloth to clean the charger and let it dry completely. Use a soft brush to remove dust from connectors. Avoid using solvents, corrosive, or gaseous cleaning agents.
- Storage:
- Store the charger in a clean, dry area away from direct sunlight to maintain its longevity.
FAQs
- Q: Can I use this charger outdoors?
- A: No, the charger is recommended for indoor use only.
- Q: What should I do if the charger is damaged?
- A: Do not use a damaged product. Contact customer support for assistance.
- Q: Is the product safe to use according to European safety standards?
- A: Yes, the product carries the CE mark and complies with safety standards established by the European Union.
IMPORTANT SAFETY INSTRUCTION
- Read this user manual and in particular the safety notes, before using the product.
- Keep the user manual for future reference and include it when passing the product on to third parties.
- Esprinet S.p.A. will not in any way be held responsible for injury or damage caused to persons or property arising from misuse of the product.
Safety notes
- Only connect the product in indoor areas to a properly installed 110–240 V AC socket.
- Only connect the product to an easily accessible socket so that you can quickly disconnect it from the power supply in the event of a problem.
- Do not use the product if it is damaged.
- Never touch the product with wet hands.
- Only use the product indoors. Do not use it in damp rooms or the rain.
- Never insert metallic objects such as keys or paper clips into the openings of the product.
- To prevent malfunction or damage to the product, avoid accidental falls, do not crush, puncture or exercise a high level of pressure on the product.
- Keep away from humidity, water or other liquids. If the product comes into contact with water, moisture or other liquids, do not use it to avoid any electrical shock or damage.
- Do not store or expose your product to any source of heat, direct sunlight, radiators, stoves or other heat sources such as the dashboard of your car in the summer.
- Never operate the product unsupervised.
- During operation, the housing may become hot.
- Do not cover the product during use.
- Never use the product when moving from a cold to a warm environment.
- Condensation may occur and, in some cases, damage the product. Allow the product to reach room temperature before connecting and using it again.
- Temperature of use: 0–40 °C.
- Do not try to modify, repair or disassemble the product.
- Do not use a damaged product. Do not under any circumstances use aggressive cleaning agents, alcohol or other chemical solutions for cleaning as they can damage the housing or even impair the functionality of the product.
- Disconnect all connected cables before you start cleaning.
- Do not immerse the product in water or other liquids.
- There are no serviceable parts inside the product.
- Never open/disassemble it. Keep the product out of reach of children.
- Never allow children or persons with disabilities to use electrical products without supervision. Make sure that children do not play with the plastic wrapping. they may swallow it when playing and suffocate.
Use
- Before charging your device, make sure its technical characteristics (voltage, output and amperage) are compatible with the charger.
- Connect your device’s USB cable to your device.
- Connect your device’s USB cable to the USB port of the charger.
- Plug the charger into a wall outlet (110–240V AC). Charging of your device will be started.
- Disconnect the charger from the wall socket and your device after use.
Cleaning
- Disconnect all cables before cleaning.
- If necessary, clean the charger with a damp cloth and let it dry completely before use.
- Use a clean brush with soft, long bristles to remove dust on the connectors.
- Do not use any solvents or corrosive or gaseous cleaning agents.
- Make sure no water or other liquids penetrate the housing.
Storage
- Store the charger in a clean, dry area.
- Keep it away from direct sunlight.
Disposal of the product
- (Applicable in countries with separate collection systems of recyclable materials) Old products may not be disposed of in the household waste!
- Should the product no longer be capable of being used at some point in time, dispose of it per the regulations in force in your country.
- This ensures that old products are recycled professionally and also rules out negative consequences for the environment.
- For this reason, electrical equipment is marked with the symbol shown here.
Technical specifications
- Item: EP-02001-01
- Code: TC1USBC20WEVO
- Input: AC 110-240V, 50/60Hz 0.5A
- USB-C output: DC 5V/3A/15W 2%, 9V/2.22A/19.98W 2%, 12V/1.67A/20W 2%
- Dimension: 76.1 x 33.5 x 33.5 mm
- Weight: 41g
- Average active efficiency: 83,40 %, 2%
- Efficiency at low load (10 %): 80,64 %, 2%
- No-load power consumption: 0,042 W, 2%
- Temperature of use : 0–40 °C
DECLARATION
- This product complies with RoHS 2011/65/EU. The product carries the CE mark and complies with safety standards established by the European Union.
- Double insulation
- Only for indoor use
- Celly® is a trademark owned by Esprinet
- S.p.A.
- All brands are registered trademarks of
- their respective owners.
- Esprinet S.p.A., via Energy Park
- 20, 20871 Vimercate (MB) –
- Italy
- Made in China.
- User manual
- WALL CHARGER
- Model: TC1USBC20WEVO
- Rev00- 27.12.2023
Read User Manual Online (PDF format)
Loading......