celly SOLARPRO10W Solar Charger with USB User Manual

celly SOLARPRO10W Solar Charger with USB

Introduction

Read this user manual and in particular the safety notes, before using the product.
Keep the user manual for future reference and include it when passing the product on to third parties.
Esprinet S.p.A. will not in any way be held responsible for injury or damage caused to persons or property arising from misuse of the product.

Safety notes

Avoid overheating the electronic board with USB port. During use, keep the board with USB port protected from direct sunlight.
Avoid excessive overheating During use the product will be subject of high temperature: pay attention to not burn yourself
Do not use the product if it is damaged.
Never touch the product with wet or damp hands.
Do not use in damp rooms or in the rain.
Never insert metallic objects such as keys or paper clips into the openings of the product.
To prevent malfunction or damage to the product, avoid accidental falls, do not crush, puncture or exercise a high level of pressure on the product.
Keep away from humidity, water or other liquids. If the product comes into contact with water, moisture or other liquids, do not use it to avoid any electrical shock or damage.
Do not store or expose your product to any source of heat, radiators, stoves or other heat sources such as the dashboard of your car in the summer.
Never operate the product unsupervised.
During operation, the housing may become hot.
Never use the product when moving from a cold to a warm environment.
Condensation may occur and, in some cases, damage the product. Allow the product to reach room temperature before connecting and using it again. This could take several hours.
Temperature of use: 0–40 °C.
Do not try to modify, repair or disassemble the product.
Do not use a damaged product. Do  not under any circumstances use aggressive cleaning agents, alcohol or other chemical solutions for cleaning as they can damage the housing or even impair the functionality of the product.
Disconnect all connected cables before you start cleaning. Do not immerse the product in water or other liquids.
There are no serviceable parts inside the product. Never open/disassemble it.
Keep the product out of reach of children.
Never allow children or persons with disabilities to use electrical products without supervision. Make sure that children do not play with the plastic wrapping. they may swallow it when playing and suffocate.

Use

1. Once unfolded the product, place it on a flat surface, away from direct water jets, with solar panels facing the sunlight.
   Place the board with USB port protected from direct sunlight.

2. Connect your cable to the device you want to charge.

3. Connect the USB cable to the solar charger’s USB port.

4. With sufficient sunglight, charging of your device will be started.

5. Disconnect the USB cable from the charger after use.

6. Store the charger safe, in a dry environment away from heat sources.

Cleaning

Disconnect all cables before cleaning.
If necessary, clean the solar charger with a damp cloth and let it dry completely before use.
Use a clean brush with soft, long bristles to remove dust on the connectors.
Do not use any solvents, corrosive or gaseous cleaning agents.
Make sure no water or other liquids penetrate the housing.

Disposal of the product

Applicable in countries with separate collection systems of recyclable materials) Old products may not be disposed of in the household waste! Should the product no longer be capable of being used at some point in time, dispose of it in accordance with the regulations in force in your country.
This ensures that old products are recycled in a professional manner and also rules out negative consequences for the environment.
For this reason, electrical equipment is marked with the symbol shown here.

Technical specifications

• Conversion efficiency: 22%
• Output: DC 5V/2A
• Weight: 220g
• Temperature of use: 0-40 ° C

This product complies with RoHS 2011/65/EU and 2015/863/EU. The product carries the CE mark and complies with safety standards established by the European Union.

Celly® is a trademark owned by Esprinet S.p.A.
All brands are registered trademarks of their respective owners.
Esprinet S.p.A., via Energy Park 20, 20871 Vimercate (MB) – Italy
Made in China.

Documents / Resources

| celly SOLARPRO10W Solar Charger with USB [pdf] User Manual
SOLARPRO10W Solar Charger with USB, SOLARPRO10W, Solar Charger with USB, Solar Charger, Charger
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>